Nik's Poulan Thread

[Wagnerwerks]

To confirm Marks suspicion

Yup... D176. I just ran down and checked it out. Lol. You know way to much about this stuff.

We need to figure out a way to manufacture "pocket" versions of you.

 

[Modifiedmark]

OOPS, look like I should have looked further. To help the OP, can he get a 16" bar w/o changing sprockets? is the current sprocket on the 5020 3/8?

Yes no problem at all, I listed the bars that were needed, and yes there regular 3/8 pitch.

 

[Modifiedmark]

Yup... D176. I just ran down and checked it out. Lol. You know way to much about this stuff.

We need to figure out a way to manufacture "pocket" versions of you.

Good luck with that! :hmm3grin2orange:

 

[RedneckChainsawRepair]

Very well could be a D096 bar, I have said and shown before there virtually the same as the D176 bars except for the slot size.

Just get some stud spacers made and use that bar that you have.

I have it on a echo 6700 right now already. I was just throwing it out there IF a poulan guy needed it. :msp_wink:

 

[67 Mustang]

Oregon's Site

For those of you wishing to check out which bar fits what, you can jump over to Oregon's site, plug in the saw model and it will tell you what Oregon bars are available for it.

OREGON® Hand Held Chain Saw Replacement Parts

 

[67 Mustang]

I have it on a echo 6700 right now already. I was just throwing it out there IF a poulan guy needed it. :msp_wink:

That model of saw used a D176, JJ. Worth throwing out there that the mid sized Echo's and some Redmax saws used the D176.

 

[OhioGregg]

Yup... D176. I just ran down and checked it out. Lol. You know way to much about this stuff.

We need to figure out a way to manufacture "pocket" versions of you.

A Mini-Mark sure would be handy to have around. No doubt. Not to be confused with a Mini-Mac.:msp_thumbup: But, you would probably tire quickly of all the Mini-Miller High Life cans rolling around.:hmm3grin2orange:


Gregg,

 

[Modifiedmark]

That model of saw used a D176, JJ. Worth throwing out there that the mid sized Echo's and some Redmax saws used the D176.

They sure did. I got this brand new 20" Powermatch shipped to my door for like $20 since no one knew what it was I guess.

 

[Modifiedmark]

A Mini-Mark sure would be handy to have around. No doubt. Not to be confused with a Mini-Mac.:msp_thumbup: But, you would probably tire quickly of all the Mini-Miller High Life cans rolling around.:hmm3grin2orange:


Gregg,

Never seen the mini cans but did do the little 7oz bottles, you still just end up drinking as much if not more. :hmm3grin2orange:

 

[RedneckChainsawRepair]

That model of saw used a D176, JJ. Worth throwing out there that the mid sized Echo's and some Redmax saws used the D176.

Yep I knew that, but spacers work for refitting. But thanks anyways, you never know.

Here is how I made large 084 etc stihl work once on husky size turned down studs on a 166. Stock have shoulders on the studs.

 

[OhioGregg]

Never seen the mini cans but did do the little 7oz bottles, you still just end up drinking as much if not more. :hmm3grin2orange:

Didn't know they had 7oz. minis.:msp_ohmy: I need to get out more. I don't drink beer, like I used to. When I cut or split wood, I usually end the day with one...or two.


Gregg,

 

[Lignator]

poulan parts

Hey all

trying to finish my poulan 20 project up. The only part I really need is the case gasket. Tried to order it 3 weeks ago and the vendor just informed me they cancelled my order because 5 of 10 parts were not available! They didn't check with me prior to cancelling the order....

Any suggestions on a good source for this gasket? No shops here stock Poulan parts anymore.

Thanks!

 

[Modifiedmark]

Hey all

trying to finish my poulan 20 project up. The only part I really need is the case gasket. Tried to order it 3 weeks ago and the vendor just informed me they cancelled my order because 5 of 10 parts were not available! They didn't check with me prior to cancelling the order....

Any suggestions on a good source for this gasket? No shops here stock Poulan parts anymore.

Thanks!

Well its not cheap, but it is what it is if you dont feel like making one.

Poulan 20 XX Craftsman 2 0 Gasket STBXDR30 77 | eBay

 

[67 Mustang]

Hey all

trying to finish my poulan 20 project up. The only part I really need is the case gasket. Tried to order it 3 weeks ago and the vendor just informed me they cancelled my order because 5 of 10 parts were not available! They didn't check with me prior to cancelling the order....

Any suggestions on a good source for this gasket? No shops here stock Poulan parts anymore.

Thanks!

Check on eBay. Bryce has them. If you can't find them on there, PM me and I'll send you the link.

 

[67 Mustang]

Poulan 20 case gasket

There you go! Mark beat me to it.

 

[Lignator]

has anyone had luck making one? I have copper spray for that purpose and can pick up some gasket material at that auto parts store.

 

[Wagnerwerks]

Good luck with that! :hmm3grin2orange:

LOL... I just thought of this... Talk about a delayed reaction...


you could sell mini-marks and they could come with a poulan micro...

 

[Wagnerwerks]

Wow

A Mini-Mark sure would be handy to have around. No doubt. Not to be confused with a Mini-Mac.:msp_thumbup: But, you would probably tire quickly of all the Mini-Miller High Life cans rolling around.:hmm3grin2orange:


Gregg,

I guess I should read the previous pages before making posts...lol

 

[Modifiedmark]

has anyone had luck making one? I have copper spray for that purpose and can pick up some gasket material at that auto parts store.

Sure if you have the patiance you can make them, just try to use the same thickness gasket paper and myself, since its sealing the fuel tank, I would use motoseal on it instead of the copper coat.

You will want to make sure and use a set of gasket punches for the holes.

 

[Wagnerwerks]

has anyone had luck making one? I have copper spray for that purpose and can pick up some gasket material at that auto parts store.

No copper spray, but I made the one for mine. The rolls or the 4 variety pack of felpro has what you need.


Edit.... This is why we need a mini mark.....he's like greased lightning with a keyboard today...