redunshee
Addicted to ArboristSite
What happened to Site
Loks like the Site has had a major change! "Bulletin" and blue background? Weird
Loks like the Site has had a major change! "Bulletin" and blue background? Weird
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
site changes
yes very strange, I hope it is really the site and not an impostor. :msp_w00t:
yes very strange, I hope it is really the site and not an impostor. :msp_w00t:
They used one in the Kevin Costner film "Waterworld", pretty cool!!!!
Guido Salvage
Supreme Saw Whoreder
Guido Salvage
Supreme Saw Whoreder
That 4484 bow is a 13" and is listed for use on the 245-306 series saws as well as the 4200 up and 360-451 type saws but they used different hand guards.
I think I better stop trying to help right here for now as it seems there are just too many combinations that were used to know just exactly what will bolt right on and what wont.
2204 is the guard used on the 3400 style saws and that's where I'm stopping. I have the bar like you have but have not the one listed for the 3400 to compare it to to see if the guards would swap or not.
Guido Salvage
Supreme Saw Whoreder
This is VB basic skin setting. :msp_wink:
If it is up and cutting I would take a spin on the 900.
Sharpening a chain for Sat.
Chain sharpening? I thought when ya bought a new one, they were good to go for life. :msp_rolleyes:
Maybe we could have a slow race...see who can cut the slowest with a dull chain. I'm sure I could place in that race.
Gregg,
I haven't touched my saws yet either. Nik, Andre, and myself plan on leaving my place about 7:30 in the morning.
MS460WOODCHUCK
Addicted to ArboristSite
I have all of my saws sharp and ready to go except for my two new huskie's which are the 390 which has not been in any wood yet and the 550 which has cut a few limb's. I got the itch to put that 390 in some wood.
If anyone has a 3000 305 or 3.0 grey with 3/8 set up please bring. I have my craftsman 3.0 bare bore 3000 but dont have the time to switch the 325 rim to a 3/8 right now. So I will be leaving it.
Just bringing the new 5020 = 16" 3/8 and new b+c 20" and case if someone wants it. Then rebuilt 3500 16" 3/8, rebuilt 505 (all rebuilds still on 2nd tanks) and a 445 rebuild.
Just bringing the new 5020 = 16" 3/8 and new b+c 20" and case if someone wants it. Then rebuilt 3500 16" 3/8, rebuilt 505 (all rebuilds still on 2nd tanks) and a 445 rebuild.
MS460WOODCHUCK
Addicted to ArboristSite
I will be bringing my 3000 but it is set up with .325. It is one of my favorites for sure. I know it won't cut with the 550 and that the 550's rings are no where seated yet but I sure would like to see how the 3000 stacks up against it.
I may pop the clutch tomorrow then. I put the 3/8 back on the 5016 and wanted same on 49cc 3.0 3000 305. Guess I could have left the 325 set up on the 5020 with 18".
redunshee
Addicted to ArboristSite
Anyone see that 4000 on EBay? Two guys really want that saw. Wish I was selling it!
Bob
Bob
I've been watching it . You see the lightly used PP330 that's up to $275 right now ?? It had a BIN of $130
MS460WOODCHUCK
Addicted to ArboristSite
Crazy isn't it. The 4000 is a good saw though and compared to the price of a new saw to run with it I guess their not doing to bad.
redunshee
Addicted to ArboristSite
Must have missed that one.
