Nik's Poulan Thread

[mweba]

Well another bay deal goes fantastic. I know you guys have seen this saw before but.......its mine now and I would like to brag LOL

 

[Modifiedmark]

Well another bay deal goes fantastic. I know you guys have seen this saw before but.......its mine now and I would like to brag LOL

Looks good with that bar on it. Did you try it yet?

I thought it was neat to send it with its original Poulan Pro bar, even if it didn't say it on the bar anymore.

Longest I had on it was a 24 to try and it sang sweet songs with it.

Just remember were almost realted now as its twin still lives in Indiana.

 

[mweba]

Thank you decomp. This saw pulls over awful stubborn. 32" bar seven pin

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="640" height="390" src="http://www.youtube.com/embed/ad3-onEDy6c" frameborder="0" allowFullScreen></iframe>

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="640" height="390" src="http://www.youtube.com/embed/YaMUW8f-qgI" frameborder="0" allowFullScreen></iframe>

 

[mweba]

Looks good with that bar on it. Did you try it yet?

I thought it was neat to send it with its original Poulan Pro bar, even if it didn't say it on the bar anymore.

Longest I had on it was a 24 to try and it sang sweet songs with it.

Just remember were almost realted now as its twin still lives in Indiana.

O yes. It pulls that 32 full ch just fine as you can see. Neat engineering in this saw. I appreciate the original bar, it will wear that most of the time.

 

[Modifiedmark]

O yes. It pulls that 32 full ch just fine as you can see. Neat engineering in this saw. I appreciate the original bar, it will wear that most of the time.

I know one thing, the way that the oiler puts out on these two, they would have no trouble oiling a 60" bar. LOL

I think I had it turned down quite a ways if I remember right. Sounds like its still tuned in pretty well.

 

[rms61moparman]

That's one heck of a nice saw for sure!!!

Congratulations!


Mike

 

[redunshee]

Thank you decomp. This saw pulls over awful stubborn. 32" bar seven pin

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="640" height="390" src="http://www.youtube.com/embed/ad3-onEDy6c" frameborder="0" allowFullScreen></iframe>

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="640" height="390" src="http://www.youtube.com/embed/YaMUW8f-qgI" frameborder="0" allowFullScreen></iframe>

Great running saw. I'm envious
Bob

 

[dave76]

Picked up a WT285 carb for my Wildthing, it's a 2900 series carb so hopefully it'll help even more. Was thinking of trying some .325 LPX chain and Sprocket on this saw??

 

[Modifiedmark]

Picked up a WT285 carb for my Wildthing, it's a 2900 series carb so hopefully it'll help even more. Was thinking of trying some .325 LPX chain and Sprocket on this saw??

Thats a 13.49mm venturi. Same size as what I used on my ported 2500. Should work well.

Personally when I get around to doing my WT that I have laying here I might try a even larger one.

 

[Big Dan]

Poulan 3800

I'm trying to post a pic of my 3800 with a big oak that I'm working on

 

[mweba]

I'm trying to post a pic of my 3800 with a big oak that I'm working on

Here ya go Big D

Nice pic,saw, and log.

 

[redunshee]

I'm trying to post a pic of my 3800 with a big oak that I'm working on

Good looking saw. Great firewood. Tired of seeing saws cut thru butter in fir or pine.

 

[67L36Driver]

Good looking saw. Great firewood. Tired of seeing saws cut thru butter in fir or pine.

Yup.

I need a log like that in back of my garden shed to test run my saws on. Too much snow around here.

 

[OhioGregg]

For anyone thats interested, I ordered the diaphragm & gasket kit from Poulan, for the Zama C3A carb, found on the 375 and some 3800's I take it.
It is the correct one. The only place I could find it. Heres a pic & part #.

Gregg,

 

[OhioGregg]

Good looking saws!!! mweba & Big Dan. I think I that is the PP475 I got a chance to run last spring. Very Nice saw!.

Gregg,

 

[Big Dan]

Posting pics

So how do you post an image and not an attachment? Thanks, Dan :question:

 

[joe25DA]

Good looking saw. Great firewood. Tired of seeing saws cut thru butter in fir or pine.

haha, must those "other" saws.
If the snow ever melts around here I have some real wood to cut

 

[OhioGregg]

Dan, I'm probably not the best guy to try to explain it, but I'll tell ya the way I do it. First thing you need is a online photo site like PhotoBucket, thats what I use, there are others. Upload your pics to that.

On photo bucket under each picture is a list of options to choose from to send the pic somewhere. I right click on the IMG code box. You will now be able to paste that link in AS. Now open the message window on Arboristsite. At the top, click on the insert image icon. A box will pop up. Right click in the box and paste the image code link in the box.

When you insert it into the message, you will see the code, bracketed by at each end of the code. If there is more than one [IMG] at each end, of the code,remove one from each end. LOL Then click on Preview Post at the bottom, and you should see your picture in the post.

With a little playing around, I think you will get it mastered in no time. Geez, this old Poulan guy figured it out. LOL
:cheers:
Gregg,

 

[caleath]

wow no one has posted in here in two days...that has to be a record

 

[8433jeff]

Bump.