nick 55
ArboristSite Guru
OK, add that one to my list too. I would run regular WT covers on it to make it more of a sleeper.
Nick
Nick
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
It is the saw Mike showed in the link. It is basically a 3750 that whatever parts were black on a reg model are purple and it has Tim Allens name on it. They are a very nice saw. Same as PP380.
I have one myself.
Actually Gregg my short list is pretty short.
3000
245
5020
3750 Tim Allen
And on a non Poulan list
166 Dolmar
044 Stihl
490 Jonsered
That about covers it.............................unless something else comes up!!!
Mike
Got ya. Nice group!!! I think in the Non-Poulan category, I would like a 372xp, especially one like yours!:msp_tongue:
Yep, I kinda like the bigger Poulans, and one of the 77cc models would fit nicely for me!!
They are basically a green & purple Poulan Pro super 380. I have got some parts from a 3750 to use on my 380.
Gregg,
8433jeff
Aftermarket connoisseur
Never even seen one, on the bay, in person, in my dreams. Something new every day.
Wagnerwerks
The underdog..
I don't think I'll share my short list.
I think everyone's lists are morphing into the same list. lol They keep picking up the other guys items and now everyone wants one!!:msp_razz:
I think everyone's lists are morphing into the same list. lol They keep picking up the other guys items and now everyone wants one!!:msp_razz:
Let's see, got a 5200, 5400, 8500, 505, 475, 455, 655 (x2), 395, 375, 4000, 3700, Super 380, 330, 295, S25CVA, S25DA, 306, 245, 245 bow, and several more small Poulan's. I can't think of another one I want.
redunshee
Addicted to ArboristSite
Yea, the Poulan 3450 Type 3 is the same saw. Same as the 3750 and Tim Allen.
Bob
redunshee
Addicted to ArboristSite
You need a 3000. At 49cc its one hellava saw. Or PP305. Same saw.
StinkyBunny
ArboristSite Operative
OK, got a small issue with the XXV. The little wench will only start when I pull the trigger once. Any more than once and she floods, if I don't it won't start. What gives?
I have a really short list, just want an 8500 which I may have located.
I have a really short list, just want an 8500 which I may have located.
stubnail67
Addicted to ArboristSite
new chains
got some 91vxlo chains in today!!! they cut pretty good not bad got 12 inch 14 and 16... for some of my small saws 2 of each 6 chains all that shipped to me for just under 70 i bought it on the 6 and got it today thats pretty great shipping!!!!i have to say i tried to make it kick back plunged the bar in and all it just grabs and cuts.... very long cutter on it good looking chains!!!! any ya all use them???? all these years i just hit lowes or my local shop and get the reg oregon chain but this seems to cut better and the price was lower..... think i found a new chain.... curious to how long it holds up ive read good stuff about it i always sharpen my stuff before small jobs and out in the field if its actin dull.....
got some 91vxlo chains in today!!! they cut pretty good not bad got 12 inch 14 and 16... for some of my small saws 2 of each 6 chains all that shipped to me for just under 70 i bought it on the 6 and got it today thats pretty great shipping!!!!i have to say i tried to make it kick back plunged the bar in and all it just grabs and cuts.... very long cutter on it good looking chains!!!! any ya all use them???? all these years i just hit lowes or my local shop and get the reg oregon chain but this seems to cut better and the price was lower..... think i found a new chain.... curious to how long it holds up ive read good stuff about it i always sharpen my stuff before small jobs and out in the field if its actin dull.....
nick 55
ArboristSite Guru
I've bought chains locally(for a serious price), from Jackssmallengines.com, and Baileys. Both websites had winners and losers price wise, but I'm going to try Edge & Engine for my next round of bars and chains.
Good to see you back on here Paul! Get that 2300 fixed yet?
Nick
Good to see you back on here Paul! Get that 2300 fixed yet?
Nick
StinkyBunny
ArboristSite Operative
Yardbird cooked over white oak, stuffed with herbs, butter and lemon is about as close to heaven as you can get on this Earth.
nick 55
ArboristSite Guru
Normally, if you have your H and L screws not turned too far out then the problem is either the inlet needle lever is set too high or the gaskets in the carb are in the wrong order. Other than that or maybe a bad or dirty inlet needle it should be ok.
stubnail67
Addicted to ArboristSite
not yet i set it on a shelf its to nice to make a franken saw im huntin for a 2300 short block thats got nice paint then i will have a sweet mint lil 2300!!!!thought i had one from dirty deeds but it did not pan out im still looking!!! thanks for that clean lil gem!
stubnail67
Addicted to ArboristSite
stubnail67
Addicted to ArboristSite
how much are they ???
this guys price was great 18 bucks for 2 45 link 20 somthin for 2 52 links and for 2 56 linh it was 22 and then 10 bucks to ship it i was happy and the guy shipped them fast!!!!
this guys price was great 18 bucks for 2 45 link 20 somthin for 2 52 links and for 2 56 linh it was 22 and then 10 bucks to ship it i was happy and the guy shipped them fast!!!!
zogger
Tree Freak
I call mine cluckburgers.
Grey/Black
I have had a 16" NOS Poulan bar for a long time now and I figured it was time to mount it on a saw. I put it on my grey/black Craftsman since this saw looks almost new. Its a nice looking saw.
I have had a 16" NOS Poulan bar for a long time now and I figured it was time to mount it on a saw. I put it on my grey/black Craftsman since this saw looks almost new. Its a nice looking saw.
Nick, no offense, but you need to get out of Illinois more often. :hmm3grin2orange:
Very sharp.
