P41

[Squareground3691]

I will try a hq 61 filter holder and filter or hq 372 x-torq filter holder with the HD filter, however with this route i need to 3d print a cover
When i will there i would like to share my results

I modified my 51 , with a V stack and K&N filter setup ,

 

[gyula91]

I modified my 51 , with a V stack and K&N filter setup , View attachment 1132855View attachment 1132856

Thanks
Very good looking saw
How did you manage to attach the K&N filter to the carb?

 

[Squareground3691]

Thanks
Very good looking saw
How did you manage to attach the K&N filter to the carb?

It’s not just to the top cover , the stack goes to air box , like OEM one , is sealed with a gasket,

 

[gyula91]

It’s not just to the top cover , the stack goes to air box , like OEM one , View attachment 1133139is sealed with a gasket,

it is an interesting solution

 

[gyula91]

I wonder that the pioneer bar studs are like husqvarna or like the stihl studs.
Does anybody know?
Hq used stud with friction fit however stihl and many other brands use srew type studs....

 

[gyula91]

The solution of my bar stud thread size is 3/8 24tpi (UNF)

 

[Old2stroke]

Good looking mod but that filter sits up pretty high, does it get in the road at all? Should check out "Bucking Billy Ray" , he runs a P51 with about a 3' bar and a custom muffler, might be ported. In one of his videos he claims it is the best saw ever built and he runs a LOT of big saws.

 

[Squareground3691]

Good looking mod but that filter sits up pretty high, does it get in the road at all? Should check out "Bucking Billy Ray" , he runs a P51 with about a 3' bar and a custom muffler, might be ported. In one of his videos he claims it is the best saw ever built and he runs a LOT of big saws.

It’s not as high as the stock west coast filters setup that came in the 41,51, 61’s from factory ,

 

[Squareground3691]

Good looking mod but that filter sits up pretty high, does it get in the road at all? Should check out "Bucking Billy Ray" , he runs a P51 with about a 3' bar and a custom muffler, might be ported. In one of his videos he claims it is the best saw ever built and he runs a LOT of big saws.

Those reed saws, have a good bunch of grunt in them,

 

[Fedde76NL]

Can I fit a 28" guidebar with 92 links on the P41 chainsaw, the reference numbers Oregon are Chain 73DPX092E / 73DX092E and the guidebar is 288RNDD009 (9mm )