Pioneer chainsaws

[tbone75]

Al, our postal strike is supposedly over, your parts will be going out shortly.

I agree with Ed, they all seem to do that.

Happy to hear that strike is over.Got some stuff to send up north!

 

[pioneerguy600]

Happy to hear that strike is over.Got some stuff to send up north!

opcorn:

I got some stuff to send down south.

 

[pioneerman]

Carb kit for pioneer 400

Looking for a carb kit for a Pioneer 400. Supposedly a Brown carb. Any ideas?

 

[pioneerguy600]

Looking for a carb kit for a Pioneer 400. Supposedly a Brown carb. Any ideas?

Change the carb to an Tillotson HL.

 

[buzz sawyer]

Looking for a carb kit for a Pioneer 400. Supposedly a Brown carb. Any ideas?

There was a diaphragm on ebay for the Brown carb - looked very similar to the HL.

I think it was under "vintage chainsaw". Just checked - don't see it now. Sorry.

This site sponsor has kits listed for Brown CP and CS models - http://store.chainsawr.com/

 

[pioneerman]

Pioneer 400

Thanks for the info. I took a closer look at the saw and checked the id tag which identifies it as a 400A, which should have the tillotson carb. I should be able to pick up a kit and start work on the saw. I didn't want to get into it if I couldn't get a kit. Saw is all there and looks to be in decent shape. Paint is good, just needs a degreasing and good cleanup.

 

[Work Saw Collector]

Hay guys Thieroff needs a muffler for a P65. Is the muffler off a P41 the same? Other than the exhaust exit location and size of the exit, it looks the same as the P62? Thanks


new 009 by supercabs78, on Flickr


new 010 by supercabs78, on Flickr

 

[Duke Thieroff]

Thanks for any help

Chris

 

[Arrowhead]

The p41 muffler will bolt on, but some major modding would be required to let it flow enough.

 

[Little Al]

P28 Trigger & trigger latch springs wanted

Does anyone have to sell or know of a source to obtain the return springs for the throttle trigger & trigger latch Pioneers part# is 431092 Thanks , Al

 

[Work Saw Collector]

The p41 muffler will bolt on, but some major modding would be required to let it flow enough.

Thanks that what I thought, I'll let him decide if he wants it. I was thinking add another pipe just like the one that is already there.

I have not seen the inside of one but maybe something like this on the outside. I'll take it off and check it out.


new 0091 by supercabs78, on Flickr

 

[Busmech]

Thanks that what I thought, I'll let him decide if he wants it. I was thinking add another pipe just like the one that is already there.

I have not seen the inside of one but maybe something like this on the outside. I'll take it off and check it out.


new 0091 by supercabs78, on Flickr

I have modified several of those by adding a second pipe directly above the first as close as you can get it. Half inch electrical conduit works well for the pipe

 

[vapnut257]

Pioneer 1200a Fuel line

Hi, I am looking for help on replacing the fuel line inside the tank. Do I have to take the saw apart or can I simply unscrew the fitting going through the front of the tank that connects to the carb? Thanks for any help.

 

[tbone75]

Got a couple saws today.P52s that I need some parts for.Wont know what all I need till I tear into them?But heres a couple pics.

 

[kipper123]

Early 80's Farmsaw

Hey fellas, I found this site by googling ( what i have found out to be a common problem) "Farmsaw recoil". I am trying to help a friend bring his fathers Farmsaw back to life. It is in mint shape, but as you have already guessed the plastic gear portion of the the recoil pulley is stripped. Do any of you know where I can find one? If not, is there another manufacture that makes something similar that will work?

Thanks

Shawn.

 

[DSS]

Hey fellas, I found this site by googling ( what i have found out to be a common problem) "Farmsaw recoil". I am trying to help a friend bring his fathers Farmsaw back to life. It is in mint shape, but as you have already guessed the plastic gear portion of the the recoil pulley is stripped. Do any of you know where I can find one? If not, is there another manufacture that makes something similar that will work?

Thanks

Shawn.

PM me your address and I'll send you one.

 

[Big Dan]

Farmsaw sprocket qquestion

Do any of you guys know if a P40 clutch drum will fit a Farmsaw? Thanks, Dan

 

[Arrowhead]

Does your Farmsaw have the fiber type shoes, or metal?

 

[Big Dan]

Does your Farmsaw have the fiber type shoes, or metal?

Don't know right offhand,there is a plate covering them up.Will have to remove that to see them.Dan

 

[Lou]

Careful Dan;
Pioneer clutch is often a right hand thread. One of a very few I have seen that do.
Lou