Pioneer chainsaws

[Pie.n.ear650]

thought i would try my hand at some artwork :msp_wink:

View attachment 277474

View attachment 277475

 

[pioneerguy600]

thought i would try my hand at some artwork :msp_wink:

View attachment 277474

View attachment 277475

Nice balancing act.

 

[Big Dan]

guide plates

I just picked a VERY slightly used P28 and for whatever reason the chain guide plates were missing.Do any of you fellers know where a new or used set could be found?

 

[Steve NW WI]

I just picked a VERY slightly used P28 and for whatever reason the chain guide plates were missing.Do any of you fellers know where a new or used set could be found?

Might have a pair at home on a parts saw. Will check when I get done work.

 

[Steve NW WI]

Might have a pair at home on a parts saw. Will check when I get done work.

Sorry, no plates on my parts saw either. Is there a chance these are designed to run without plates? On the P-28 IPL, all I see is a bucking spike, PN 430441, that looks like it's optional, and probably fits the outside of the bar under the cover?

Experts - need some help here!

 

[67L36Driver]

Sorry, no plates on my parts saw either. Is there a chance these are designed to run without plates? On the P-28 IPL, all I see is a bucking spike, PN 430441, that looks like it's optional, and probably fits the outside of the bar under the cover?

Experts - need some help here!

I had a 1073 and presently have a P-21 and P-26, none of which had bar plates. But, we all know that they are often lost by careless operators.

Yes, bucking spike is incorperated along with the hand guard.

Dang, don't have a pic. of my 26.

 

[DSS]

No bar plates on the small P series saws. . A 1073 has that silly sheet metal chain adjuster that looks like a bar plate but isn't.

Go cut wood

 

[Big Dan]

Sorry, no plates on my parts saw either. Is there a chance these are designed to run without plates? On the P-28 IPL, all I see is a bucking spike, PN 430441, that looks like it's optional, and probably fits the outside of the bar under the cover?

Experts - need some help here!

Thanks for checking Steve,maybe it didn't come with plates,maybe one of the other guys knows for sure.

 

[Big Dan]

No bar plates on the small P series saws. . A 1073 has that silly sheet metal chain adjuster that looks like a bar plate but isn't.

Go cut wood

Ok, thanks for the reply,that little saw does a good job for it's age.

 

[67L36Driver]

Got this off evilbay late last year. Just cleaned him up and serviced the recoil. Roller nose came off a 1073 carcass a guy gave me.

Spikes incorperated with the hand guard.

 

[leecopland]

Cleaned up nicely

Got this off evilbay late last year. Just cleaned him up and serviced the recoil. Roller nose came off a 1073 carcass a guy gave me.

Spikes incorperated with the hand guard.

That little guy cleaned up really well. I have 1073 and a p25 neither which have chain plates. You're lucky that the AC cover is not broken, very common, because people tend to lean on it to start. I find they have some snot for an old saw, both about 50cc. They will certainly boil fuel in the summer. On mine I find that fuel makes the fuel cap swell making it difficult to get off or on.

Not a saw to use all day, white finger syndrome, but a fun little saw for the price of a case of beer.

Regards,

Lee

 

[jerrycmorrow]

i got one too. i ended up wiring my hand guard on since it had a bad habit of trying to escape and i knew, cause i know myself, that one time i'd forget to pick it up.

 

[Acornhill]

Sabre chain 404 X .058

i picked this up to go on my P41 that had the pioneer bar sprocket tip break (3/8 X .058) i changed the sprocket tip to a 404 X ? and the rim to a 404 X 7 and picked this chain up to run on it. i hope it all works out and i am happy.
View attachment 278161View attachment 278162

 

[pioneerguy600]

i picked this up to go on my P41 that had the pioneer bar sprocket tip break (3/8 X .058) i changed the sprocket tip to a 404 X ? and the rim to a 404 X 7 and picked this chain up to run on it. i hope it all works out and i am happy.
View attachment 278161View attachment 278162

I would have stayed with the 3/8" chain for that saw , the 41 will pull the .404 ok but adds a lot more strain on the engine than the 3/8" would do. I remember well when all we had was .404 but was more than happy when the 3/8" became available.

 

[Acornhill]

I would have stayed with the 3/8" chain for that saw , the 41 will pull the .404 ok but adds a lot more strain on the engine than the 3/8" would do. I remember well when all we had was .404 but was more than happy when the 3/8" became available.

if i come across a 3/8 sprocket i can always switch it back in 2 minutes. i could not find one from anywhere and nobody stepped up to offer one. i will say this the P41 pulls the 32" bar just fine so i am sure it will pull the 24" also it is a frankensaw so not really sure how many cc's it is.

 

[Big Dan]

Farmsaw coil

Hi guys, I'm posting this here instead of the swapmeet to be sure I reach the right people.I'm needing a good coil for a Farmsaw and have some NOS Pioneer parts to trade including coils for other saws.Please PM me if you can help me out.Thanks, Dan

 

[fossil]

if i come across a 3/8 sprocket i can always switch it back in 2 minutes. i could not find one from anywhere and nobody stepped up to offer one. i will say this the P41 pulls the 32" bar just fine so i am sure it will pull the 24" also it is a frankensaw so not really sure how many cc's it is.

PM sent re sprocket

 

[7hpjim]

Hi guys, I'm posting this here instead of the swapmeet to be sure I reach the right people.I'm needing a good coil for a Farmsaw and have some NOS Pioneer parts to trade including coils for other saws.Please PM me if you can help me out.Thanks, Dan

I may have a coil, let me check, PM me, I could use a P41 coil in trade.
Jim

 

[DSS]

Hi guys, I'm posting this here instead of the swapmeet to be sure I reach the right people.I'm needing a good coil for a Farmsaw and have some NOS Pioneer parts to trade including coils for other saws.Please PM me if you can help me out.Thanks, Dan

An electronic coil from a Homelite SXL-AO is the same and might be easier to find. . Very trouble prone.

 

[Acornhill]

farmsaw coil

An electronic coil from a Homelite SXL-AO is the same and might be easier to find. . Very trouble prone.

is that the blue coil for the P38, etc pioneer?