Pioneer chainsaws

[Acornhill]

Two new to me saws.View attachment 538928 View attachment 538929 View attachment 538930 View attachment 538931

those look to be in exceptionally good shape, got to love the Canadian Pioneers.

 

[Boomer 87]

So i called about crank seals for my p41, they were only 3.30 each so i got two sets. I also ordered a carb kit bc it wouldnt pump any fuel last night. Your gonna think im crazy but ive had 100ll fuel do this once before, i let it sit all night and came home and it fired up and is ready to go i dont know if it dissolved some junk or if it works on the hard diaphragms but it started and was ready to go to work. Im gonna do seals and a carb kit bc there to cheap not to but shes a runner

 

[p61 western]

those look to be in exceptionally good shape, got to love the Canadian Pioneers.

Thank you,and yep I love me some Pioneers.

 

[Lou]

I bought my FarmSaw new in 79 or 80.
I've yet to rebuild my carb.
Once in a blue moon I have to put a dash of mix in the throat to get her to fire (I run her dry and store her empty). Once fired she's good for another 100,000 cuts. I too like 100LL.
Lou

 

[jerrycmorrow]

Anyone know OE or AM numbers for seals for P20 and P26?

 

[Acornhill]

Anyone know OE or AM numbers for seals for P20 and P26?

428746 P20 P26 same for most all P series saws, even the big ones SKF 5606 NAT 472705

 

[huck01955]

View attachment 538661 View attachment 538662 there she be what thinkist thee

2 Very nice saws

 

[Beavers]

Pics of some recent projects, these early P40, P50 have breaker point ign systems. a combination of new and good used parts were used to complete these projects. Still waiting for a new P40 decal to arrive to be installed on the Air ckeaner cover.

 

[Boomer 87]

Just rebuilt the carb on my p41 to confirm an air leak. Im about 80% sure one of the crank seals are leaking. When turned to one side the idle speeds up and under WOT is starts to lean out. But i got seals coming from my local carquest

 

[Beavers]

l would replace the both crank seals at the same time. l would do the bubble soap test after blocking of your intake , exhaust , compression and &spark plug hole, then pressurize block. to confirm/target other potential leaks

 

[Boomer 87]

I think i will, brother has a pressure/vac tester. I know its leaking air, oddly enough out of dozens of saws this is the first one ive had where an air leak was very apparent. I was concerned i had an air leak on my 056 so i just did crank seals just because and it did subtlely change my idle.

 

[Acornhill]

Pics of some recent projects, these early P40, P50 have breaker point ign systems. a combination of new and good used parts were used to complete these projects. Still waiting for a new P40 decal to arrive to be installed on the Air ckeaner cover.

what is the paint code of the Pioneer Yellow, Green etc? thank you

 

[Beavers]

i take new parts with good Oem paint colour to our Local Home hardware store and have the colour scanned and custom made in 1 litre. Do you have Home Hardware in your area?

 

[Boomer 87]

My local carquest can scan parts with some kinda laser it will tell them.what makes up the color, then they can even have it put in an spray can

 

[Beavers]

Pioneer restor, some new and good used parts to complete this Saw. Was a Fun project to work on.

 

[Beavers]

My local carquest can scan parts with some kinda laser it will tell them.what makes up the color, then they can even have it put in an spray can

l have tried them up here with the rattle cans but was not pleased with results. also expensive.

 

[p61 western]

If your going to use the saw powder coat is the way to go,or just leave them as is and run em.

 

[huck01955]

Hears a saw I got from a friend of mine on hear very pleased with it [A

 

[leecopland]

Wow! You should be Pleased.

 

[Beavers]

Joe the Saw looks real Nice.