Pioneer chainsaws

[Big Dan]

The part that mounts to the cylinder is 430938,and the part that sits below that is 431307.Hope this helps they are hard to come by.

Thanks, p61 western. There was a guy on here selling some NOS Pioneer stuff and I asked about the coil but he never got back to me.

 

[mathewsdxt75]

Tonight, I brought back to life a pioneer farmsaw that was sitting for a long time. I got it in a load of parts saw I bought from my local power equipment guy. This farm saw was in a box by itself with a tag that said "no spark". Shocker I know. Also the recoil wasn't working correctly. It even has a decent bar and a really good chain.
I was able to get a spring thing off another saw and recoil was fixed. I checked saw over very well before purchasing an aftermarket coil off fleabay. With a new coil, fuel lines and fuel filter, I gased it up, and it runs great.
Tomorrow I plan on getting it into some wood and see how it does. I can hear it begging to run hard. Once I get it tuned, I just may have to sell it.

 

[Big Dan]

Nice Farmsaw, I just got it's twin running and am going to give it a workout tomorrow.

 

[Lou]

Tonight, I brought back to life a pioneer farmsaw that was sitting for a long time. I got it in a load of parts saw I bought from my local power equipment guy. This farm saw was in a box by itself with a tag that said "no spark". Shocker I know. Also the recoil wasn't working correctly. It even has a decent bar and a really good chain.
I was able to get a spring thing off another saw and recoil was fixed. I checked saw over very well before purchasing an aftermarket coil off fleabay. With a new coil, fuel lines and fuel filter, I gased it up, and it runs great.
Tomorrow I plan on getting it into some wood and see how it does. I can hear it begging to run hard. Once I get it tuned, I just may have to sell it. View attachment 536433

Before you toss out the dead coil research this thread. They can often be recovered by baking them.
I was skeptical too but I baked mine and it worked. I wanted to go 16 hours but my damned oven is smarter than I am and I only got 12... it was enough.
Lou

 

[rocketnorton]

2 hr @ 250 has worked for me 3x

 

[Big Dan]

2 hr @ 250 has worked for me 3x

Would this baking trick also work for the 2pc P41 coil?

 

[mathewsdxt75]

2 hr @ 250 has worked for me 3x

I must've had mine up a little to hot then. I tried it with no success then set it even a touch hotter.....and everything melted. oh well. The aftermarket coil works great.

 

[rocketnorton]

Would this baking trick also work for the 2pc P41 coil?

haven't tried on those, the 3 I did were the blue coils, like farmsaw, farmlite.

 

[mathewsdxt75]

Nice Farmsaw, I just got it's twin running and am going to give it a workout tomorrow.

I took it out and mine ran very strong. The only thing I ran into was I forgot to take the clutch off and lube the clutch bearing. After a little while cutting, I thought the clutch spring was bad because the chain kept spinning and when I tried to stop it, the saw would quit. Once I took rhe clutch off, it was just a dry sticky bearing. I cleaned it and lubed it, and it is ready to go again.
I was pleased on how strong it ran.

 

[rocketnorton]

strong saws. like my p40 cause it has points, tho.

 

[Acornhill]

I never realized Pioneer had so many saws using these rings

Sent from my LG-D800 using Tapatalk

 

[fossil]

the 51cc saws. Tons of them.

 

[Acornhill]

the 51cc saws. Tons of them.

Are the pistons the same even though the part # is different. I have two 1074 pistons with rings.

Sent from my LG-D800 using Tapatalk

 

[fossil]

I can't help you there. The only one I have is a 1074.

 

[Acornhill]

This is not a for sale ad, I now have most of the Pioneer parts lot that was advertised in the trading post. Still waiting on the smalls and some larger items from the seller. I now have complete top end kits for P41 Farmsaw P51 P52 P655 and most of a P61 complete saw NOS.

Sent from my LG-D800 using Tapatalk

 

[Boomer 87]

Im looking at a pioneer p41, looks decent.how big are they and what would it be worth ball park i dont know alot about it yet.

 

[fossil]

Im looking at a pioneer p41, looks decent.how big are they and what would it be worth ball park i dont know alot about it yet.

They are 66 cc and have a huge amount of torque. Great saws. Not sure what it's worth. I think I paid $75 for a fairly nice one and I felt that was a good buy.
Make sure it has spark.

 

[Boomer 87]

Ok its advertised for 90 i was gonna offer 75, granted it has good compression and spark.

 

[jerrycmorrow]

Tonight, I brought back to life a pioneer farmsaw that was sitting for a long time. I got it in a load of parts saw I bought from my local power equipment guy. This farm saw was in a box by itself with a tag that said "no spark". Shocker I know. Also the recoil wasn't working correctly. It even has a decent bar and a really good chain.
I was able to get a spring thing off another saw and recoil was fixed. I checked saw over very well before purchasing an aftermarket coil off fleabay. With a new coil, fuel lines and fuel filter, I gased it up, and it runs great.
Tomorrow I plan on getting it into some wood and see how it does. I can hear it begging to run hard. Once I get it tuned, I just may have to sell it. View attachment 536433

What is this aftermarket coil you speak of?

 

[Acornhill]

Here is a plastic recoil cover for a farmsaw ll. I wonder how durable it is

Sent from my LG-D800 using Tapatalk