Pioneer chainsaws

[Cookie]

city of delta paint here

Did the city at least spray paint it? Or brush

 

[rocketnorton]

I dunno. was on thick, decals taped off. good paint. couldn't get the **** off easily so just went over it. greens are hard to cover. bout 3 coats yellow, so that's why the black on cc/tank.

 

[fossil]

Your junk pile looks better than mine

 

[2stroke_shaman]

Your junk pile looks better than mine

I thought that too !

 

[2stroke_shaman]

I feel like I'm working on a watch . Small piston puller! 8-32 screw Cool little saw ,echo cs302.

 

[p61 western]

Took these three out to play today.

 

[2stroke_shaman]

Took these three out to play today.View attachment 630306

Motley Crew . Looks like fun .

 

[p61 western]

Motley Crew . Looks like fun .

It was a good time. I just finished porting the farmsaw and p51. They both run really good. The p51 will likely beat up on my Pioneer/Partner p62.

 

[Walter Glover]

So cold up here would need diesel for bar oil!
5 below snow and the odd chilling wind. Man i miss the sawdust exhaust aroma! Lol
Porting would love to hear more of how and where?
Cheers fellas

 

[GoRving]

Gotta love those old Pioneers!

 

[p61 western]

So cold up here would need diesel for bar oil!
5 below snow and the odd chilling wind. Man i miss the sawdust exhaust aroma! Lol
Porting would love to hear more of how and where?
Cheers fellas

Most of the work is in the exhaust port, but did mess with the upper transfers a little bit.

 

[p61 western]

Most of the work is in the exhaust port, but did mess with the upper transfers a little bit.

Learned most of this from @hillwilliam .

 

[Cookie]

Cool belt buckle On kijiji.

 

[2stroke_shaman]

Anyone have a p10 or 11 ? Off a RC car 35 cc.

 

[Walter Glover]

Neighbor gave me a sad P50 today. Got run over and everything in front of crankcase busted off. But could be a good engine parts saw
Also came with a nice shape Skilshop 1716 Type 1. Good day it was.

 

[p61 western]

Here is a short video of one of my p41's.

 

[2stroke_shaman]

Finally getting around to putting the 600A back together . This is my homebrew piston pin pusher. Little heat on the piston and it goes right in . Took me a half hour to find the pin clip that went PING installing it! lol hate when that happens. Anyone know what the squish should be ? I didnt see it in the manual. This is the one with the copper head gasket.

 

[2stroke_shaman]

The squish ended up at .032 . I read an old post from pioneer guy about wanting to mill a cyl to drop it below .020 so I think i'll be fine.

 

[2stroke_shaman]

Found these bits today looking for a farmsaw decal.

 

[paul hill]

Here is a short video of one of my p41's.

Nice 41, looks like it's real strong.