Project: Make an MS460 sexier!

[Adam_MA]

Is it even possible?? Let's see...

We start with this

Add a box o' goodies

Look at what's inside the box

First, I made the BAD decision a year or so ago to put these things on. Trust me I WON'T MISS THEM!

For the love of GOD what was I thinking... Look at them.. What was the Pro Safety thinking? They actually make your saw run worse! They drag the saw into the cut, and stall the chain.

View attachment 235802
View attachment 235803
View attachment 235804
View attachment 235805
View attachment 235806

 

[Adam_MA]

This has taken a few hits!

Figured I would pop off the clutch drum, and greas the bearing, but something didn't look right behind the clutch. Look what I found..

That looks better

Here's all the tags of the parts I used

View attachment 235807
View attachment 235808
View attachment 235809
View attachment 235810

 

[Adam_MA]

The money shots...

Oh yeah, she's sexier!!! I didn't think it would be possible!
Overall, I'm happy with the outcome, not only does it look better, but it'll be more functional. And of course, it's always fun working on a saw!


View attachment 235813
View attachment 235814

 

[deye223]

yep looks good to me

 

[blsnelling]

Very, very nice. I loves me a 460!

 

[Sagetown]

The money shots...

Oh yeah, she's sexier!!! I didn't think it would be possible!
Overall, I'm happy with the outcome, not only does it look better, but it'll be more functional. And of course, it's always fun working on a saw!


View attachment 235813
View attachment 235814

The MS 460 is a looker alright, even without the add-ons, but I must say I like that handlebar, and the smaller spikes look so much better on her.

 

[Raganr]

Great looking saw. My 460 project looks very similar. I also used the Bailey's muffler and made the mistake of buying the pro safety spikes.

Just got a large clutch cover, chip deflector, roller catcher and outer dog. Once the Sugihara bar arrives, I think I will be done with this one and can turn my focus towards a rear handled MS200...

 

[Adam_MA]

Thanks for the comments guys....

Raganr: I don't know if you can see from the pic, but that's the Baliey's DP muffler on this saw. Just a warning, the paint will blister off, and it will start to rust pretty quickly. I still have the stock muffler, I think I'm going to order the Stihl DP cover. It's a much nicer piece.

 

[Adirondackstihl]

I gotta get me a 3/4 wrap for my 044.
I'll be felling some larger trees on my property that are situated on a fairly steep slope, so I can see the need or usefullness of them.....AND...they look cool.

Not willing to dish out $150 for OEM however.....looks like I'll be ordering the USA bar from Madsens in the near future:cool2:

 

[Stihlofadeal64]

law child, dat saw done tuk muh bref away. I dun got to feelin all swimmy heady. I had to go get muh glasses and sad-down :cool2:. Please don't put no moe pitchers of it up! It's making me :alien2: wif envy!

 

[Trx250r180]

law child, dat saw done tuk muh bref away. I dun got to feelin all swimmy heady. I had to go get muh glasses and sad-down :cool2:. Please don't put no moe pitchers of it up! It's making me :alien2: wif envy!

if get the pro-safty dogs ,get the 4 point ones ,they are same size top and bootom as oem stihl ,just a little deeper torward the bar ,the 5 points were designed for thier full wrap handlebar only View attachment 235861

 

[young]

you know its cheaper to buy the complete clutch cover assembly from stihl which comes with everything.

 

[young]

I gotta get me a 3/4 wrap for my 044.
I'll be felling some larger trees on my property that are situated on a fairly steep slope, so I can see the need or usefullness of them.....AND...they look cool.

Not willing to dish out $150 for OEM however.....looks like I'll be ordering the USA bar from Madsens in the near future:cool2:

who ever is charging 150 for the oem 3/4 handle is ripping you off. retail is like 109ish. still not as cheap as the USA handle bar.

 

[kr5258]

Here's some handy kit numbers:

Large clutch cover with big dogs and chain catcher: 1128 640 1708
3/4 wrap handlebar: 1128 790 3616

 

[fastLeo151]

What you doin wit the old spikes

 

[Trx250r180]

who ever is charging 150 for the oem 3/4 handle is ripping you off. retail is like 109ish. still not as cheap as the USA handle bar.

i think 109 is what i paid for my last one

 

[roncoinc]

Man,,,,,,,,,,,,,,,,,,,, that is one FUGLY lookin saw !!!
of course ALL stihl's are so no big deal
and that color scheme ?? LOL !!
unsubscribing before my stumoch turns even more

 

[Trx250r180]

Thanks for the comments guys....

Raganr: I don't know if you can see from the pic, but that's the Baliey's DP muffler on this saw. Just a warning, the paint will blister off, and it will start to rust pretty quickly. I still have the stock muffler, I think I'm going to order the Stihl DP cover. It's a much nicer piece.

i put the bailys cover on my oem muffler ,kept the baffle inside ,didnt remove it ,and opened the factory 460 side opening to about the size of the bailys one with a dremil ,that deflector will keep the hot flame away from the dualport cover and not cook the paint off so easy ,a good wood stove paint works good on mufflers ,i usually heat the metal on the muffler before i paint so the woodstove paint sticks better ,i bought a stihl one ,the oem paint comes off just as easy as the aftermarket ones ,the bailys muffler has no baffle like a oem ms440 so the exhaust hits directly to the dualport cover

 

[wairoaboynz]

if get the pro-safty dogs ,get the 4 point ones ,they are same size top and bootom as oem stihl ,just a little deeper torward the bar ,the 5 points were designed for thier full wrap handlebar only View attachment 235861

Goodmorning from New Zealand. Has anyone tried this on a Stihl 084? And what is the diffidence between large and small spiked dogs...type of trees your sawing or something?

 

[Chris J.]

.

What you doin wit the old spikes

I knew that someone was was going ask for those Klingon Bat'Leth spikes .