Project Stumpbroke MS290

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cut the Muffler appart & gutted it. I cut the bolt tubes off & held them in with the bolts when I welded it back together.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws013-2.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws013-2.jpg" border="0" alt="Photobucket"></a>
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws014-1.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws014-1.jpg" border="0" alt="Photobucket"></a>

The finnished product. I fabbed & welded the shrouds on & made a block off plate fer the front.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws037.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws037.jpg" border="0" alt="Photobucket"></a>
 
Cut the Muffler appart & gutted it. I cut the bolt tubes off & held them in with the bolts when I welded it back together.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws013-2.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws013-2.jpg" border="0" alt="Photobucket"></a>
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws014-1.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws014-1.jpg" border="0" alt="Photobucket"></a>

The finnished product. I fabbed & welded the shrouds on & made a block off plate fer the front.
<a href="http://s772.photobucket.com/albums/yy4/stump7997/?action=view&amp;current=saws037.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/saws037.jpg" border="0" alt="Photobucket"></a>

There is no question the fella will know what saw he's running. Stumpbroke saws roar... :rock:
 
The results are in!!!!

All cuts made in 16" pine. The saw is on it's fifth tank after the build.

Stock with slight MM
13.97
13.13
13.42
12.54
13.08

13.228 AVG.

Stumpbroke
10.41
11.00
11.54
10.51
10.65

10.822 AVG

13.228
10.822

2.406 sec diff.

Not too shabby.
 
All cuts made in 16" pine. The saw is on it's fifth tank after the build.

Stock with slight MM
13.97
13.13
13.42
12.54
13.08

13.228 AVG.

Stumpbroke
10.41
11.00
11.54
10.51
10.65

10.822 AVG

13.228
10.822

2.406 sec diff.

Not too shabby.

Those are interesting stats Stump!!! Is the throttle response a lot better now?
 
Those are interesting stats Stump!!! Is the throttle response a lot better now?

It has a slight lull right off of idle. Probably due to the high intake duration, but other than that it's very snappy with plenty of pull. The last three tanks were noodlein some oak that was longer than the bar and it held rpms even when I was pushin it hard. It's getting better with every tank I put through it. I'll admit that it turned out to be a lil hotter than the work saw I'd planned on.
 
It's on!!!!!

It's on like Donkey Kong.

dk.jpg


You guys know I got to work next Monday, I guess me not being there keeps you from getting beat. :msp_tongue:
 
Back
Top