Rip Chain for 660 ?

[HansFranz]

I want to build a woodworking workbench but can't find decent lumber for the 2' x 7' x 3-6" top, so I plan to cut slab(s) from a dead tree (I think I have a dead white oak or loblolly pine that will work), then joint and glue them up if need be.

Don't have an Alaskan mill, but plan to nail a board to the tree as a guide to get a planar surface, then turn it and repeat to square it up and get it down to manageable size to bring home and work on...

Can anyone recommend a good ripping chain to use for this on my 660 with 28" bar?
The bar uses .050" chain 3/8" and IIRC 91 DL.
If I'm lucky, I think there's a WO that's been down 10+ yrs., so assume it'll be dry and hard stuff.

I googled around for a while, but kind of got lost. Thanks for any help.

 

[RedneckChainsawRepair]

If it had been 3/8 058 I could have made you a loop ripping 10 degree semi chisel to try. From these 2 100' rolls I got on trade years back. 1 was ripping and 1 full skip FC.
I was just going to file it back to normal if that need ever comes.

 

[HansFranz]

Semi chisel or full-chisel better?

For most of my firewood cutting, I use full chisel, but don't know which to choose for ripping downed, dried hardwood.

Anyone tried this stuff?
https://www.amazon.com/8TEN-Ripping-Chainsaw-Chain-Stihl/dp/B09PVMPK3R

 

[heimannm]

The ripping chains I've seen have all been chisel, 10° seems to be the preferred angle. Just take one of your current chains and sharpen it at 10°.

This is a piece of Oregon 51RL; .404 .058 ripping chain that looks to be filed or ground at 0 or 90° depending on your persecpective.









Mark

 

[cscltd]

You can use Stihl 33RMX ripping chain.
.050 3/8 standard sequence pre made by Stihl and I think almost same price as their reg chain.
Most use semi chisel for rip chain now it seems. Before was chisel.
Oregon has greatly increased the price of their premade rip chain.

 

[SS396driver]

Semi chisel or full-chisel better?

For most of my firewood cutting, I use full chisel, but don't know which to choose for ripping downed, dried hardwood.

Anyone tried this stuff?
https://www.amazon.com/8TEN-Ripping-Chainsaw-Chain-Stihl/dp/B09PVMPK3R

I haven’t tried their ripping chains but I wasn’t impressed with their regular chains . Got a couple real cheap at ACE on clearance.