Scrounging Firewood (and other stuff)

[bob kern]

Next time consider bucking the broken top down before dealing with the stump. Lest ye kill yourself.

That is a very, very simple situation when done correctly.

I may get to deal with this little treasure tomorrow. Right over trail, dangling by a thread.

 

[H-Ranch]

I would give away nicer looking chains than that one.

Meh. If I was flush with chains I may have passed. I have enough to tie down equipment on the trailer and maybe a couple more. 15' with 2 grab hooks I thought was pretty good for $6. It's certainly not transport grade or anything.

 

[svk]

I may get to deal with this little treasure tomorrow. Right over trail, dangling by a thread. View attachment 1215031

Is tannerite a viable option?

 

[BeatCJ]

I may get to deal with this little treasure tomorrow. Right over trail, dangling by a thread. View attachment 1215031

well, @bob kern somebody needs to deal with it, why not you...

I think I would try a come-a-long first.

 

[H-Ranch]

I may get to deal with this little treasure tomorrow. Right over trail, dangling by a thread. View attachment 1215031

Need a chain? I have a free one to give away.

 

[Lionsfan]

Meh. If I was flush with chains I may have passed. I have enough to tie down equipment on the trailer and maybe a couple more. 15' with 2 grab hooks I thought was pretty good for $6. It's certainly not transport grade or anything.

Just being honest. I have 4 milk crates full that I pulled out of the scrap bin when I was flatbedding.

 

[Squareground3691]

New kid on the block,

 

[Lee192233]

Is tannerite a viable option?

One pound in the break should do it.
Plus it would be fun!

 

[SS396driver]

Got some more done in my 68 . Was able to get the ball joints removed from the spindle with this little home made tool . Put tension on it and a slight hit with a hammer and the joints popped . No whaling away with a 3# sledge .
58 year old upper ball joints on it the lowers looked to be original also

 

[SS396driver]

Driver side is all done new 2 1/2 drop spindles with disc brakes . No more manual drum . Total drop in front is 5 1/2 inches with the 3 inch drop springs and 2 1/2 spindles
Before

After

 

[bob kern]

well, @bob kern somebody needs to deal with it, why not you...

I think I would try a come-a-long first.

Yep. Already laid it out! I have zero desire to get under that hot mess!

 

[bob kern]

Is tannerite a viable option?

Oh I wish!

 

[bob kern]

Need a chain? I have a free one to give away.

Thanks but I gots me plenty of those. They don't eat much and when the boy gets his own place.......

 

[GrizG]

We have not had ANY rain here all October (luckily, we did up at the cabin, so my gutter collection system worked so we could do our projects).

Slight chance on Thursday, but we are getting very dry.

We were the same until the current, not earlier forecast, rain started falling this evening!

 

[GrizG]

Driver side is all done new 2 1/2 drop spindles with disc brakes . No more manual drum . Total drop in front is 5 1/2 inches with the 3 inch drop springs and 2 1/2 spindles
Before View attachment 1215052

After
View attachment 1215053

Probably won’t clear the bollard bases with that set up… I still haven’t replaced the air dam on my car that I snagged when we were out there….

 

[SS396driver]

Probably won’t clear the bollard bases with that set up… I still haven’t replaced the air dam on my car that I snagged when we were out there….

This truck isn’t a firewood getter

 

[GrizG]

This truck isn’t a firewood getter

Assumed it wasn’t but couldn’t resist.

 

[Lee192233]

View attachment 1215041New kid on the block, View attachment 1215040View attachment 1215039

Can it be sharpened with a round file? Looks intriguing.

 

[SimonHS]

The Skipinnish Oak has been named UK Tree of the Year 2024.

https://www.bbc.co.uk/news/articles/cpvzn3vxlxno

 

[Squareground3691]

Can it be sharpened with a round file? Looks intriguing.

Yes, supposed to compete with the RS PRO , but it’s not NK like PRO , it looks fast will try it against the PRO to get comparison soon .Looks like a .325 version of C83 ,