Scrounging Firewood (and other stuff)

[freeasaburt]

The latest scrounge... Folks I know cut down a dead birch, and asked if I wanted the wood.
Bit of beginning rot but nothing to worry about imo. Easy to keep the wood pile replenished, this way .
Gonna split and stack it next week, will provide some nice heat in a year or two!

 

[sean donato]

A little side-step from the varmint & excavation talk:
I have a pretty old offset-head hatchet that's been my go-to for debarking my firewood. It probably had a crack in the head when I bought it but I've just noticed it more recently. I feel like this is so old that trying to weld it back together will be a fool's errand.
I'd appreciate your thoughts

I'd grind it out and weld it, have done similar to axes and hatchets over the years.

They said the gun was a 3d printer job.

even if it was it wouldn't have been very accurate or lasted very long. There are quite a few short comings in 3d printing parts that see excessive heat and pressure. One of the many reasons I haven't bothered to attempt it myself.

 

[JimR]

I'd grind it out and weld it, have done similar to axes and hatchets over the years.

even if it was it wouldn't have been very accurate or lasted very long. There are quite a few short comings in 3d printing parts that see excessive heat and pressure. One of the many reasons I haven't bothered to attempt it myself.

His pistol was for a short term life.

 

[chipper1]

I was thinking of you guys when I came in for a lunch break yesterday from the barn.
Had a few deer come thru while I was out there, right between the barn and the house lol.

Ceiling is finally done out there too.

 

[svk]

Good morning. Unseasonably warm temps this weekend followed by rain and now sleet. The roads are messy but not slippery at the moment.

 

[GrizG]

Good morning. Unseasonably warm temps this weekend followed by rain and now sleet. The roads are messy but not slippery at the moment.

The roads were slick last night around 10… traction control kicked in at every intersection. I kept off the brakes and drove with the gas pedal so the ABS didn’t kick in. This morning it was still slick but is now melting off and raining. Going into the 50s tomorrow… Not sure I like this weather!

 

[freeasaburt]

It's pretty mild for the time of the year here too, 7-9°C (about 44-48°F) here today and they predict temps to rise to 12-13 (about 54F). But also quite windy and a lot of rain... meh. I definitely prefer colder temps with less wind/rain. Like those nice winter days with a bright blue sky.
We did have some snow a few weeks ago, but it melted in a day or two.

 

[GrizzlyAdams86]

We had the freezing rain/sleet/fog crap Saturday afternoon/evening into early Sunday morning. Although it did get and stay above freezing (mid-upper 30's) and the roads were treated yesterday, the truck did get a little squirrelly this morning from some refreeze on the roads in spots.