show me your 041...

[Duke M]

HELLO, YA GOT ANY EXTRA 041 PARTS ? I NEED A CYLINDER AND A PISTON FOR MINE, ITS NOT AN AV,cant aford alot thanks Duke

 

[Bluemaxpilot]

Well with all this 041 talk...the bug got to me!! I originally was just looking for a decent one to restore. So I browsed the pages of eBay there she was! Mind you, not as sexy as Pioneerguy's 041 but she's nice none the same.

I'm pleased, to say the least. Plus, I didn't get into any bidding wars!! But to make a long story short, she's has 165 PSI, no noise's and cuts strong.

<a href="http://tinypic.com" target="_blank"><img src="http://i41.tinypic.com/6rts2g.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
<a href="http://tinypic.com" target="_blank"><img src="http://i41.tinypic.com/73phmh.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

 

[pioneerguy600]

Well with all this 041 talk...the bug got to me!! I originally was just looking for a decent one to restore. So I browsed the pages of eBay there she was! Mind you, not as sexy as Pioneerguy's 041 but she's nice none the same.

I'm pleased, to say the least. Plus, I didn't get into any bidding wars!! But to make a long story short, she's has 165 PSI, no noise's and cuts strong.

<a href="http://tinypic.com" target="_blank"><img src="http://i41.tinypic.com/6rts2g.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
<a href="http://tinypic.com" target="_blank"><img src="http://i41.tinypic.com/73phmh.jpg" border="0" alt="Image and video hosting by TinyPic"></a>

That sure is a nice one, you going to use it to cut wood? The good one I have don`t get used but I have a beater that I run and cut with that I have also been replacing some of the broken/bent and deteriorated parts on. Its come a ways since it was given to me as a parts saw.
Pioneerguy600

 

[belgian]

Ok, now don't get upset cause mine is prutier than yours,lolol

Hehe Tommy, I found myself another 041AV that looks sure as pruty as yours...:check:

it's almost mint...

The owner said he couln't get it started and dealer told him to buy a new one... , so it ended up with me. It turned out to be a 1 $ repair job...

I really like these 041's !!

 

[Wildman1024]

I just picked this one up off CL tonight! He wanted $135 for it and I ended up giving him $60 for it. The poor thing has defiantly had a hard life and needs a few things but I couldn't pass it up for the price.

She has alot of mix and match screws and a few cracks in the casing...Hopefully I can get it pieced back together 1 piece at a time.

Do you think the main part of the case can be fixed there where the screw enters??? I also need that piece between the main part of the saw and the pull starter...all the tabs are broken

 

[parrisw]

Here is mine.

 

[Gregford]

None!!!

if I was looking to buy one, which one should I be looking for?

Buy yourself a nice "Wild Thing" - you've already got far too many Stihls as it is

 

[dheitz]

041 bar oil adjustment

I bought my dad an 041 farmboss in 1977. He says he lost the tool that allows you to adjust the flow of oil to the chain. Neither I nor my local dealer remember the part. Any suggestions. Anyone remember that part?

 

[woodbooga]

Couple of pics of mine. Got it at a yard sale for $50. Runs great. Perfect complement to my 210-260- Homelite 550 line-up of most frequently running saws.

 

[belgian]

I bought my dad an 041 farmboss in 1977. He says he lost the tool that allows you to adjust the flow of oil to the chain. Neither I nor my local dealer remember the part. Any suggestions. Anyone remember that part?

The chainsaw flow is adjusted by a red knob located at the side of the carb front. It's a little weird location but, you can adjust it with a simple screw driver from the top or from the clutch side..

 

[Mr. Bow Saw]

Heres mine 041 AV and 041 AV super.

 

[stihlavarna]

I picked this ole honey off of Craigslist not knowing if it ran of not, it did (152 PSI) glad I got it I dig the low torque. no anti vib, no chainbrake, points style I think this is the earliest plain jane on here. the only thing to complete it is the trigger lock, but it'll still start off idle even cold!

 

[jockeydeuce]

I'm glad this thread got bumped! As a relative chainsaw noob, I wouldn't have thought that these old saws were that popular. The 041 sure had a long production run!

Great pics guys!

 

[pioneerguy600]

I picked this ole honey off of Craigslist not knowing if it ran of not, it did (152 PSI) glad I got it I dig the low torque. no anti vib, no chainbrake, points style I think this is the earliest plain jane on here. the only thing to complete it is the trigger lock, but it'll still start off idle even cold!

Nice survivor, looks to be an early 041 Farm Boss, single lever in the cover with vents on each side.
Pioneerguy600

 

[sawbones]

041

Here are a few of my 1110 saws.

The only saw I still would like to locate is the 040.

( note, bar shown on farmboss is later generation. )

left to right

041AV super W/ chainbrake.. 041AV super..041 electronic.. 041 FARMBOSS.. 041 G.. 041

 

[pioneerguy600]

Here are a few of my 1110 saws.

The only saw I still would like to locate is the 040.

( note, bar shown on farmboss is later generation. )

left to right

041AV super W/ chainbrake.. 041AV super..041 electronic.. 041 FARMBOSS.. 041 G.. 041

Real nice sampling of the 041 models, nice to see them all in one spot.
Pioneerguy600

 

[kstill361]

Here's one that's been in use since '73. It kept us warm for many cold nights.

Gotta say, nice o41's!

Peacock, I bet that hedge tree played a big part in keepn you warm too! Love that stuff!

 

[tantoy]

 

[Work Saw Collector]

Nice saw.

 

[stihldriver]