Sure is quiet in here....do I need to start a fight?

[tbone75]

I have a can of the black, tar like high temp permatex. I have used it to fix a NLA 4stroke head gasket before. worked fine? Also have the blue silicone permatex. Which would be better?

I use the black on that type stuff,more oil resistant it says on the tube.

 

[tbone75]

Mornin fellas!

Changed the oil in the truck and out doin a lil yard work

Tryin to finish gettin rid of the last rock garden that was grown up to weeds

Nearly done with it

Lots of rocks in there!

Caught a baby bunny yesterday mornin when I started this project

He almost had an unfortunate weedhacker incident!

Truck goes in for inspection next week hope that don't cost to much!!!!!

Good luck on the truck !

 

[farrell]

Good luck on the truck !

Hopin nothin more than ball joints

Tires and brakes are good

 

[IEL]

I have been up for almost 5 hours, and am just getting my AZZ out of bed now... Still not even 9 am... Time for a few mugs of coffee, some food, and saw time!

 

[tbone75]

I have been up for almost 5 hours, and am just getting my AZZ out of bed now... Still not even 9 am... Time for a few mugs of coffee, some food, and saw time!

Slug !

 

[IEL]

I have all the mac parts covered in paint stripper. Just waiting on it to peel, than scrape, than go off to do my other things today. I am using one of those crap safety strippers. No need for gloves, but takes well over an hour to work... :msp_angry:

I am buying the most toxic and dangerous one I can find next time. Also might not help that this jug is almost 17 years old?

 

[tbone75]

Just finished putting the MS170 back together,with a different carb. LOL Thing looks almost new. It won't last long ! LOL

 

[tbone75]

I have all the mac parts covered in paint stripper. Just waiting on it to peel, than scrape, than go off to do my other things today. I am using one of those crap safety strippers. No need for gloves, but takes well over an hour to work... :msp_angry:

I am buying the most toxic and dangerous one I can find next time. Also might not help that this jug is almost 17 years old?

Can't get anything good around here ! Use to get airplane stripper,paint would bubble up in a couple mins. Stripping cars wasn't no fun at all ! I gave up on using stripper and just sanded it all off. Bout the same amount of work. Small parts it best to use stripper,not big stuff. Way to much mess !!
The best way I found was to put it all over a car,then go to the car wash ! LOL Just don't get caught !! LOL

 

[Jimmy in NC]

At this point with a little searching, there are so many large blasting booths that are so affordable. Had a '28 Model A blasted and primed for ~$800 7 years ago. So quick and easy.

 

[tbone75]

I want to go mow down some trees ! But the back says go mow grass. :msp_thumbdn:

 

[Jimmy in NC]

I want to go build saws and fix generators, pressure washers, etc....no I'm going to "paint the laundry room" land. :banghead::thumbdown::banghead:




Jimmy

 

[Jon1212]

Sup' Gents?

Finally got the family moved to Utah. Allied Van Lines affiliate showed up 5 days late to move us, and managed to break quite a few pieces of furniture. They even managed to break our clothes dryer. Buncha Bastards!

 

[Jimmy in NC]

Hate that for you....but what are you doing taking all of my luck? Thought I was the only one with luck like that!


Jimmy

 

[dancan]

Sup' Gents?

Finally got the family moved to Utah. Allied Van Lines affiliate showed up 5 days late to move us, and managed to break quite a few pieces of furniture. They even managed to break our clothes dryer. Buncha Bastards!

Coulda been worse , you couldw got the 7 dwarf's furniture and 7 Huskapewlon's .......

 

[dancan]

Or .......The visit I got today from the AmAzoil salesman
What planet are these guys from ????

 

[Jon1212]

Coulda been worse , you couldw got the 7 dwarf's furniture and 7 Huskapewlon's .......

Does Google have a Canadianese Translator? I have no idea WTF you said?

 

[pioneerguy600]

Glazing putty isn't real tough. Real thin it should work fine,just let it dry real good. Make sure there is NO OIL or anything like that where your using it ! Its made to fill pin holes and stuff like that.
Real simple to use,just need it super clean where your using it.

All I can say for magnesium, use White Lightning. It will never come out of any pitting or dents etc if the metal is clean and dry before application.

 

[tbone75]

Does Google have a Canadianese Translator? I have no idea WTF you said?

Thought you spoke Danadian ? :msp_rolleyes:

 

[dancan]

Does Google have a Canadianese Translator? I have no idea WTF you said?

That's it , I'm taking the gloves off and giving Mr.IeatliveandbreathAmaZoil you're new address , I'm sure he'll be there tomorrow and will explain to you how great the shyte is .......

 

[tbone75]

All I can say for magnesium, use White Lightning. It will never come out of any pitting or dents etc if the metal is clean and dry before application.

I like white lightning !


You must be talking about something else than the drinking kind ? LOL