Sure is quiet in here....do I need to start a fight?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Please help, my daughter has me dressing her baby dolls on a "camping trip". I am feeling any trace of manliness going away.
 
95 F150 5.8 E4OD Dana 44 SAS up front 5.13s locked front and rear. Has a few dents, one from where a tree hit me :) Not gonna mess up the front or rear bumpers- 8" channel.

Actually traded the truck for my IH H. Then traded a AR for the truck back :D That guy swapped the axle and put the gears in.. I came out smelling like a rose for once. Although mom wasnt happy.

Ive considered selling it and fixing up the K10, but I still want a play toy. Too many projects I guess..

Sparky, 024 and a Contra or Lightning? :p


What model Jred yall looking for IPl for?
 
95 f150 5.8 e4od dana 44 sas up front 5.13s locked front and rear. Has a few dents, one from where a tree hit me :) not gonna mess up the front or rear bumpers- 8" channel.

Actually traded the truck for my ih h. Then traded a ar for the truck back :d that guy swapped the axle and put the gears in.. I came out smelling like a rose for once. Although mom wasnt happy.

Ive considered selling it and fixing up the k10, but i still want a play toy. Too many projects i guess..

Sparky, 024 and a contra or lightning? :p


what model jred yall looking for ipl for?

521e..
 
Ok Robin,,i'm "real" close now..

will pull flywheel tomorrow and see for sure what i found :)

da meter told the story.

i got's switches will work :)

taking the switch apart will confirm it is an on/off/on .

even sez on side of saw ,, 1 0 2 ,, one zero two ,, first gear,,, off ,, second gear.. or,, low ,, off ,, hi..
owners manual should say ??
 
95 F150 5.8 E4OD Dana 44 SAS up front 5.13s locked front and rear. Has a few dents, one from where a tree hit me :) Not gonna mess up the front or rear bumpers- 8" channel.

Actually traded the truck for my IH H. Then traded a AR for the truck back :D That guy swapped the axle and put the gears in.. I came out smelling like a rose for once. Although mom wasnt happy.

Ive considered selling it and fixing up the K10, but I still want a play toy. Too many projects I guess..

Sparky, 024 and a Contra or Lightning? :p


What model Jred yall looking for IPl for?

SO close.
 
Sorry Ron, Im drawing a blank. All the IPLs I looked at are similar, but doesnt really show heated handle bars, but it would help if I knew which ones had them :p Tell Robin to get outta the boat!
 
I wanted to see how the wires connected inside the flywheel.

worked on plenty small engines that had a generator inside there and wanted to see how they wired it.

havta get out the Fluke and take some readings,,,got my suspicions and a meter will confirm.. :)

Not a lot to see under the flywheel..just a stator and two wires 1 gray or white....black goes to terminal 1 on switch (front).....gray to term 3 on switch( rear).....one wire from rear handle goes to term 2 (middle)on switch other wire from rear connects to one of the top handle heater wires....the other top handle wire goes to ground... That's it.......
 
Ok Robin,,i'm "real" close now..

will pull flywheel tomorrow and see for sure what i found :)

da meter told the story.

i got's switches will work :)

taking the switch apart will confirm it is an on/off/on .

even sez on side of saw ,, 1 0 2 ,, one zero two ,, first gear,,, off ,, second gear.. or,, low ,, off ,, hi..
owners manual should say ??

Yep that's how it is.......when you first start cutting or are cutting and setting the saw down a lot to move brush etc....be in #2....but if you are bucking in a pile and running the saw hard have to drop back to #1 as 2 gets gets to hot......faster you turn the saw the more "juice" it makes for the heaters.....I really enjoyed using mine last winter....
 
Spent the day doing yard work.
Tomorrow I am heading to the next town over to try my luck at finding an apw (air pressurized water) can at the extinguisher shop..... Let's hope they have used ones.....
They are not worth it new.... I would rather get another co2 at that cost.....
Wish me luck.
 
Yep that's how it is.......when you first start cutting or are cutting and setting the saw down a lot to move brush etc....be in #2....but if you are bucking in a pile and running the saw hard have to drop back to #1 as 2 gets gets to hot......faster you turn the saw the more "juice" it makes for the heaters.....I really enjoyed using mine last winter....

I got 2 of them heated handle Red saws ! :clap:
 
Spent the day doing yard work.
Tomorrow I am heading to the next town over to try my luck at finding an apw (air pressurized water) can at the extinguisher shop..... Let's hope they have used ones.....
They are not worth it new.... I would rather get another co2 at that cost.....
Wish me luck.

I got one of them ! :msp_tongue:
 

Latest posts

Back
Top