Sure is quiet in here....do I need to start a fight?

[Cantdog]

Super nice Robin !!!

Thanks John....kinda fun to go once in a while.....this one was a challenge.....as you can see the 20" and 13" flues......and the fact that the chimney was not centered in the ridge...and so one valley came in on the face so the apron had to change to step flashing and then a corner apron as there is a cricket built and the valley direction changed so it came down by the corner of the chimney for run off, then it ended up that one side of the chimney was a 12 pitch and the other side a 10 pitch.....poor design.....but we "Got 'er Done"!!

 

[Stihl 041S]

That is really nice Lad.
I keep looking at the pictures......

 

[pioneerguy600]

I see the hammers already worked on the Orange turds!

 

[Cantdog]

I see the hammers already worked on the Orange turds!

Oh no I used wrenches on those......those are specially weighted Stihl adjustment hammahz........and the Brown & Sharp is use measure how much more hammah they need...surprisingly accurate.....

 

[Cantdog]

That is really nice Lad.
I keep looking at the pictures......

Thanks Unc.......sum butt scratchin' involved right there......

 

[El Moobs]

Hello men. I hope everyone here had a fantastic Easter weekend.

 

[tbone75]

Hello men. I hope everyone here had a fantastic Easter weekend.

Sure did , hope you did the same !!!

 

[El Moobs]

Sure did , hope you did the same !!!

Yep. It was a good day for an egg hunt !!!!

Good to read ya John.

 

[Stihl 041S]

Oh no I used wrenches on those......those are specially weighted Stihl adjustment hammahz........and the Brown & Sharp is use measure how much more hammah they need...surprisingly accurate.....

Keep your eyes open for a set of Mitutoyo with the carbide inset jaws.

They stay VERY true and sharp for layout lines.
And the steel doesn't were them out.

 

[Stihl 041S]

Hey Dan.
Used the Brush Blender today......Uber Awesome

 

[pioneerguy600]

Oh no I used wrenches on those......those are specially weighted Stihl adjustment hammahz........and the Brown & Sharp is use measure how much more hammah they need...surprisingly accurate.....

One bap or two? Orange plastic will usually crack with one bap, times it takes a couple but fall apart they do...LOL

 

[pioneerguy600]

Hello men. I hope everyone here had a fantastic Easter weekend.

Did here, family and stuff kept me busy,time just flew by. Good of you to drop by,hope yours was fantastic as well.

 

[Cantdog]

One bap or two? Orange plastic will usually crack with one bap, times it takes a couple but fall apart they do...LOL

Has to be measured...Steels vary a lot.....nevah know how much beating they will need to come back within specs....

 

[pioneerguy600]

Has to be measured...Steels vary a lot.....nevah know how much beating they will need to come back within specs....

They sure can take a licking and keep on ticking, the orange T`s not so much!

 

[Cantdog]

They sure can take a licking and keep on ticking, the orange T`s not so much!

Yeeeeeeah........this one HAD a tick....I think.....once upon a time....

 

[Jimmy in NC]

Yeeeeeeah........this one HAD a tick....I think.....once upon a time....
View attachment 573563

Have I seen that one before?

 

[pioneerguy600]

Yeeeeeeah........this one HAD a tick....I think.....once upon a time....
View attachment 573563

Looks like a good project saw, don`t see no reason for a tick in that pict, maybe a closer inspection would show a reason.

 

[pioneerguy600]

I love it when someone brings me a mystery saw in a box project, the saw usually ends up in my collection as a free saw. Most likely 90% of my running saw collection is made up of former parts saws.Must find some time soon to clean up and build my latest 026 donation, will make a real nice saw with a couple hours of free time involvement.

 

[pioneerguy600]

Ug, that red 2071 and Sachs Dolmar 116 Super is still sitting on the deck, no one took em yet. May or may not hear from who left them there.

 

[Cantdog]

Have I seen that one before?

10-4