Swap meet...

[RedneckChainsawRepair]

Need a functional 16"-20" bar and chain for a Poulan 3400. Shoot me a PM if you have this combo laying around collecting dust. Thanks

I have a great shape (almost like new IMO) older style Windsor D196 with replaceable tip I ran on a poulan 4000 with S clip. Would trade for same condition 18" in D176 or D009 bar or 20" bar. Have chain too unless trading a 18" bar back.

Sorry it's not collecting dust is why trade is wanted. I use it on Echo with D176 mount in the mean time now and then.

 

[tomdcoker]

Tom I have two and they read HU51E 326,they are off 031's. I can drop one in the mail if want it.

I picked up two 032 saws Saturday with Tillotson carbs. and I now have the 031 running as it should. Thanks for the offer on the carb. Tom

 

[blsnelling]

Long shot, but I'm looking for a bunch of GOOD 385/390 cranks. Don't have much to trade but ya never know.

Have you considered these? HUSQVARNA 385 385XP 390 390XP JONSERED 2186 2188 CHAINSAW CRANKSHAFT CRANK | eBay

 

[LowVolt]

Husqvarna and Dolmar bars

Looking for a bar for a 357xp, 20" x 3/8 x .050. Also looking for a 16" bar for a Dolmar PS-540. The bar that came with the dolmar was one of those thin ones like a stihl picco bar. I would like the bars to be in excellant shape. I have stuff and $. Drop me a PM.

THANKS!

 

[parrisw]

Have you considered these? HUSQVARNA 385 385XP 390 390XP JONSERED 2186 2188 CHAINSAW CRANKSHAFT CRANK | eBay

Yes I have Brad, that's what I'm going to get, that seller actually only lives 45min from me. So I'm going up there to get a crapload of stuff from him, got 4 390's, 3 385's, 365, 362 to build.:msp_scared: Going to try the VEC 390 pistons from him too. Only have 1 good crank, JJ is sending me 1, all have bad pistons. Just cleaned a crap load of parts today at work in the Jet Clean, love that thing.

 

[jbird77]

lookin

Iam lookin for a project saw for me. I would like to have somthing smaller i dont really have anything to cut limbs when iam in the tops after falling trees and as iam getting older i love my 288 and my 2071 but somthing lighter would be nice to go with them ,

 

[PogoInTheWoods]

Need a MS 192T engine pan, handle, and anything else 192T ya may have laying around. Have some swappage and $$$.

TIA.

 

[jbird77]

stihl

I found a stihl 066 he said its older with a 30 inch bar and chain ,kinda rough lookin for 400 said strong runner

 

[tlandrum]

View attachment 263693View attachment 263694
ive got a good running dolmar 7900 up for sale in the as classifieds but it is also for trade. i am looking for a 372xp or a minty 346xp new edition in trade for it. the dolmar is stock with no porting. the dolmars are just not my cup of tea and really dont know why i even took it on trade. i keep giving the dolmar a chance but just cant make myself like them. i guess im just a 372 snob these days. any one with a trade offer can call me. number is in the sig.

 

[Mastermind]

Yes I have Brad, that's what I'm going to get, that seller actually only lives 45min from me. So I'm going up there to get a crapload of stuff from him, got 4 390's, 3 385's, 365, 362 to build.:msp_scared: Going to try the VEC 390 pistons from him too. Only have 1 good crank, JJ is sending me 1, all have bad pistons. Just cleaned a crap load of parts today at work in the Jet Clean, love that thing.

You have any extra 385 or 390 jugs?

 

[parrisw]

You have any extra 385 or 390 jugs?

Not right now no. I'm hoping to build all of these. I got enough for all of them, however one has allot of alu transfer. Paid a pretty penny for all of this stuff, and gona cost a bunch more in parts to get them running, I just bought the lot to hopefully build them then sell them and make a few pennies hopefully. Sorry Randy.

 

[Mastermind]

Not right now no. I'm hoping to build all of these. I got enough for all of them, however one has allot of alu transfer. Paid a pretty penny for all of this stuff, and gona cost a bunch more in parts to get them running, I just bought the lot to hopefully build them then sell them and make a few pennies hopefully. Sorry Randy.

No worries bro. I need a good jug for a customers saw. He's already got too much in the dang thing and I'm hoping to be able to help him out.

 

[parrisw]

No worries bro. I need a good jug for a customers saw. He's already got too much in the dang thing and I'm hoping to be able to help him out.

Ya, sorry about that. I wish I could help ya out. I hate sending stuff out if I may need it. I'll check the saw shop that I'm going to on Monday, and I can ask around if you want me to.

 

[Mastermind]

Ya, sorry about that. I wish I could help ya out. I hate sending stuff out if I may need it. I'll check the saw shop that I'm going to on Monday, and I can ask around if you want me to.

Please do.

I won't use anything other than OEM or Meteor. Meteor doesn't make this kit. :bang:

 

[parrisw]

Please do.

I won't use anything other than OEM or Meteor. Meteor doesn't make this kit. :bang:

Ya same here. This time unfortunately, Meteor doesn't make 390 pistons, so I'm going to try the VEC brand, I just can't justify shelling out the $100 a piece for 390 pistons.

 

[Brushwacker]

Iam lookin for a project saw for me. I would like to have somthing smaller i dont really have anything to cut limbs when iam in the tops after falling trees and as iam getting older i love my 288 and my 2071 but somthing lighter would be nice to go with them ,

I have a Husky 55 back a ways in the classifieds.

 

[tbone75]

Looking for a usable Stihl 040 clutch cover. May need some recoil parts too? First one of these I have worked on. LOL Recoil won't catch half the time?
Thanks for any help ! :msp_smile:

 

[Pioneer42]

Looking for quite a few MS200t parts. Need the muffler, from the oiler to the clutch drum, and all the recoil parts(pulley, spring, and pawl)

Pm if you have any parts.

 

[tbone75]

Looking for a recoil for a Troy Bilt 42cc saw,or just the guts. its just a cheapy but a guy wants to fix it. LOL TIA

 

[wigglesworth]

Anybody have a 272 muffler and HD filter?