Swap meet...

[Metals406]

Lookin to get rid of a few saws.

920 jred
066 stihl
028 farm boss
4500 echo

Lookin for 372 cylinder.
Ts076 cutoff saw air filter and cover. Plus the stihl badge that goes on the recoil cover

066 you say? :msp_wub:

 

[tbone75]

Sir, your INBOX is full....

Good luck ! Its always full !

 

[Brushwacker]

Lookin to get rid of a few saws.

920 jred
066 stihl
028 farm boss
4500 echo

Lookin for 372 cylinder.
Ts076 cutoff saw air filter and cover. Plus the stihl badge that goes on the recoil cover

Not interested in the echo, are the other 3 complete runners or ?
I have a box of cutoff saw parts that came with an 075 I had, some of which were transferred to the 075. I'm thinking that the cutoff saw is tso76, I'll check and see whats all there when I get a chance .
I have an Husky 55 that looked good, was probably straight gassed I'm thinking by looking at the piston. I don't know if the cylinder is good. If it is missing any parts, I'm not aware of it but its possible a small part got lost in the schuffling. Would like to trade it off for something similar in Stihl or maybe a small runner .

 

[Jordan3605]

Looking for a chain adjuster for the Pro Mac 700
not sure if this adjuster would be the same on all the McCulloch 10 series saws or not.

 

[RedneckChainsawRepair]

Lookin to get rid of a few saws.

920 jred
066 stihl
028 farm boss
4500 echo

Lookin for 372 cylinder.
Ts076 cutoff saw air filter and cover. Plus the stihl badge that goes on the recoil cover

Not interested in the echo, are the other 3 complete runners or ?

I pm'ed right after posted and I just want to know mainly on the echo 4500............:cool2:

 

[bplust]

Looking for a chain adjuster for the Pro Mac 700
not sure if this adjuster would be the same on all the McCulloch 10 series saws or not.

It is. I'm not 100% sure if it's the same as the right hand pull models, but the bars do interchange, so it might be.

 

[Eccentric]

Looking for a chain adjuster for the Pro Mac 700
not sure if this adjuster would be the same on all the McCulloch 10 series saws or not.

The adjuster pin/nut is the same for all 10-series Macs. There were two different length adjuster screws however. The shorter, full length threaded screw was used on all of the RH start 10-series saws, as well as the LH start saws without a chainbrake. The chainbrake equipped 10-series saws all used the longer screw with an unthreaded portion near the screw head.

 

[ChainsawmanXX]

Box empty.... for now

 

[MechanicMatt]

I need-

a 55 starter (cover only is fine, the guts are there and ok)
a 55 top cover

Let me know what I owe you.

TIA

Check your email, I think I sent you a pic from my phone.

 

[torinocobra]

Got a part number for that governor? I wouldn't be able to pick it out of my stuff visually, as I'm definitely no resource for Homelite knowledge, but I do have several boxes of NOS Homelite sorted by part type. If you get me a part number, I'll check to see if I have it.

Bryan

A-6051 is the part number. It is the one on the left with the shorter springs but if you have any of these type governors I'd be interested. View attachment 267202

 

[huskydude]

I need-

a 55 starter (cover only is fine, the guts are there and ok)
a 55 top cover

Let me know what I owe you.

TIA

If Matt's deal doesnt work out, I have a starter assembly, it's missing decal, nothing pretty, but lmk.

 

[nmurph]

Check your email, I think I sent you a pic from my phone.

Didn't come through.

 

[tlandrum]

i am in need of a 272 coil to make a 3120 unlimited.

 

[MechanicMatt]

Didn't come through.

View attachment 267226

The Top cover has a little bit of melting under it from the muffler, and a crack in the rear. Kinda where a 50 would have the choke lever. Ill try your email again.

Ohh I see there is a "h" hidden in there. Sorry.

 

[o8f150]

was wondering is anyone had a good wt 215 carb,, the one i got the other day is so full of rust and varnish it won't come out :bang::bang::bang:,,, i need it for my ms 170,,,i have an almost new 14" stihl bar and stihl chain off of a 170,, it is .043 gauge for trade or i have some cash

well i called a local guy who had one in stock,, so i bought a brand new one for 30.00,, not bad

 

[bplust]

A-6051 is the part number. It is the one on the left with the shorter springs but if you have any of these type governors I'd be interested. View attachment 267202

Huh. I thought all Homelite part numbers were at least 5 numbers long, but as I said in my previous post about this, I'm no Homelite expert.

For governors, all I have is A-55796.

 

[torinocobra]

Huh. I thought all Homelite part numbers were at least 5 numbers long, but as I said in my previous post about this, I'm no Homelite expert.

For governors, all I have is A-55796.

Thanks for checking!

 

[8433jeff]

well i called a local guy who had one in stock,, so i bought a brand new one for 30.00,, not bad

Thats a popular fix for those.

 

[barneyrb]

Looking for a 064 crank, one of my tree service guys snapped the clutch end off and he wants to replace it. Shoot me a price in PM please

 

[Warped5]

Hi guys! Really need two older rubber recoil handles. I am indifferent to brand.