Swap meet...

[epicklein22]

Not sure if this is the best place to post this but, I purchased an Oregon AX511 (New), and now that the cat is out of the bag, I have people wanting me to do their chain sharpening. What are the current rates. Spent several years using the 511 when I was in the business full time. But its been awhile. One shop I worked in we used to charge by the cutter then add if the depth gauges(drags) also needed taken down. Another shop we just charged by the chain length as determined by the number of drive links. That cost was set to be constant weather the drags were ground or not. Which I believe led to a bit higher cost for those who had chains not ready for the drags to be ground. of course Im thinkin in terms of US dollars. the overwhelming answer I get when I call the shops in the area is bring the chain in THEN well discuss price! Dirty Dogs. They are afraid of the competition, specially since I do much better work than most of the guys in this town. Just sayin.:chainsawguy:

Rennie

Prices vary a lot around here, but most are around 5 bucks for chains up to 20". Add a dollar for rakers or over 20". However, my one husky dealer charges $2 for any chain and will do it on the spot. If I was you, I would do everything for 4 or 5 bucks. Might want to venture into selling chain and sharpening mower blades too.

 

[jimbo1490]

Need a set of spikes/dogs/dawgs (whatever you wanna call 'em) for a Husky 372. Have cash, but they are only ~$40 new at the dealer.

Jimbo

 

[Meadow Beaver]

Anybody have a PNW sprocket cover they want to part with? I have $$ I know bailey's has them aftermarket, but I want to stick with OEM, as it's goin on a keeper saw. FWIW its Stihl PN 1122 648 0401.

Why didn't you tell me fool I got a 1122 648 0403.

 

[MS460WOODCHUCK]

Why didn't you tell me fool I got a 1122 648 0403.

What do ya want 4 it. I'm interested.

 

[MS460WOODCHUCK]

I'm looking 4 a good top handle saw. PM if you have a good one you want to part with.

 

[epicklein22]

Anybody have parts for my new project saw? I just got it and haven't dug into it, but I know I will need a muffler at the least.

<img src="http://img138.imageshack.us/img138/3811/022li.jpg">

Anybody interested in this? It's going on ebay in a few days if no one seals a deal with me. I also have a poulan 4000.

Craftsman/poulan 3800. Right around 130-135 for compression. Starts and runs nicely. In good shape. More pics if needed.

<img src="http://img195.imageshack.us/img195/9366/019mm.jpg">
<img src="http://img195.imageshack.us/img195/1261/014nh.jpg">
<img src="http://img200.imageshack.us/img200/7599/018ivo.jpg">

 

[Meadow Beaver]

I believe your Craftsman is just a Poulan with a different label and colors.

 

[sefh3]

I'm looking for the plastic recoil sprocket for this little saw. Here is what mine looks like. If you have one PM. I have $$$$ to trade.

Let's try these pics of this.

 

[computeruser]

Looking for a 044/440, 271/272/371/372 project saw that won't break the bank. I've traded off most of my tradin' goods already, so this one will have to be a trade for some cash...

 

[volks-man]

mine looks close but i seem to have plastic pins @ 11 and 5 o'clock.
if the whole recoil will work then why not get the whole thing?



<a href="http://s263.photobucket.com/albums/ii150/volks-man/?action=view&current=PICT2033.jpg" target="_blank"><img src="http://i263.photobucket.com/albums/ii150/volks-man/PICT2033.jpg" border="0" alt="Photobucket"></a>

 

[54stude]

McCulloch D30 might be available for trade for Stihl 026 or similar.

I found a McCulloch D30 in great shape, with original bar, with the yellow painted shape still on the end. I have not gotten it running or purchased it yet, but I would be willing to pick it up and pass it on to a serious collector. I am sure the owner will sell it to me, and I would be willing to trade this saw for a used running modern stihl saw like an 024, 026, 036, or similar.

I hope this post is the right place for this since I am not selling this saw, it is only available for trade.

 

[little possum]

Andrew, is that a Orline Mustang?

 

[epicklein22]

Andrew, is that a Orline Mustang?

Not technically, it is a model 148. Pretty much a mustang though. I have always wanted one.

 

[little possum]

Oh, My mistake. Cool looking little critter. SP is on the search for carb parts for his.
Congratulations on the saw, its nice finding what you want once in a while

 

[Jacob J.]

Need a set of spikes/dogs/dawgs (whatever you wanna call 'em) for a Husky 372. Have cash, but they are only ~$40 new at the dealer.

Jimbo

They're only $15 @ Bailey's...

 

[volks-man]

anyone have a homelite 540 they wanna part with?

i can swap lots of stihl stuff. i might even throw in a perfectly good makita 6401.

 

[jimbo1490]

They're only $15 @ Bailey's...

If found I could get the 'shorty' ones for $15 at Bailey's but the big one that came with the full wrap are more than double that, around $20 for each side.

 

[Meadow Beaver]

$40 a pair? What dawgs are they?

 

[jimbo1490]

$40 a pair? What dawgs are they?

The bigger, longer 272/2171 dogs. Why they should cost so much more, I don't know, but that's what they quoted me. I mean it's only just a little bit more sheet metal! I'm not about to pay $40 for a pair of spikes, don't worry. Just wanted to return it to 'stock', that's all.

Jimbo

 

[Meadow Beaver]

You mean pro-safety 4-point dawgs for the 372-390? Like these
http://cgi.ebay.com/HUSQVARNA-CHAIN...emQQptZLH_DefaultDomain_0?hash=item53dac6c20c