Swap meet...

[Arrowhead]

Ed- do you still need a set of those Homelite 540 thin-rings? I forgot all about those when I went to the hurricane.

Yes, What timing!! 100% true... I just opened up Hastings site to check on them. Those will fit the 930 Jred correct?
I also remembered just a few hours ago when I was in the shop and found the 680 Solo muffler I was supposed to send you.
Need any other 670/680 Solo schtuff?

 

[Jacob J.]

I'm pretty sure they will. The 540 is a 54mm bore with a 1.25mm locating pin and they're designed to be pretty tight. So if anything, they'll be just slightly oversize (.025" or so) for the 930.

I can use plenty of Solo stuff, including air filters, air filter covers, flywheels, ignitions, intake blocks, etc. I can reciprocate with Pioneer parts.

 

[Arrowhead]

I'm pretty sure they will. The 540 is a 54mm bore with a 1.25mm locating pin and they're designed to be pretty tight. So if anything, they'll be just slightly oversize (.025" or so) for the 930.

I can use plenty of Solo stuff, including air filters, air filter covers, flywheels, ignitions, intake blocks, etc. I can reciprocate with Pioneer parts.

Cool beans. I'll prepare you a box tomorrow and hopefully get it mailed. Once you get it... decide what it's worth in Pioneer parts or pretzels.

 

[Arrowhead]

Anybody have a decent circular Stihl MS390 name plate for the recoil?

 

[Nardoo]

Is this what you need Ed?

MS 290 310 390 Plus Stihl Trademark Name Plate New | eBay

Al.

 

[tbone75]

Anybody have a decent circular Stihl MS390 name plate for the recoil?

Dang Ed , you must sleep bout as much as I do ! LOL

 

[Arrowhead]

Is this what you need Ed?

MS 290 310 390 Plus Stihl Trademark Name Plate New | eBay

Al.

Kinda, it needs to say MS390 on it.

Dang Ed , you must sleep bout as much as I do ! LOL

LOL, trying to get caught up on projects.

 

[huskydude]

I love this thread.

 

[Saw Dr.]

Kinda, it needs to say MS390 on it.

LOL, trying to get caught up on projects.

You should put an 880 plate on there. I am surprised I have not seen that trick on CL yet

I'll check tomorrow. We ordered a recoil for one recently, and I think the "extra" emblems stayed around. They come with all 3

 

[nstueve]

still tryin to hunt a couple bars: standard 12mm stihl (024, 028, 026, 029, 290, etc etc...)
2x - 16in .325
1x - 16in .375
1x - 18in .325

also 120si or 6800i cylinder if anyone has one hindin somewheres?

got some parts/bars/chain to trade and some green if need be

 

[Johnsobri]

Husqvarna 345 parts.

Looking for some muffler bolts and a carburetor that will fit an Husqvarna 345.
Have the greenbacks to trade. Shoot me a pm.

 

[Jacob J.]

Looking for some muffler bolts and a carburetor that will fit an Husqvarna 345.
Have the greenbacks to trade. Shoot me a pm.

I think I have all that...

 

[psuiewalsh]

Anyone have a clutch cover assembly and chain adjuster that fits a husky 242. parts, stuff and notes to trade.

 

[bucknfeller]

I think I have one, is that the one with the adjuster screw on the front of the brake cover? If you can ID it in a photo, I'll try to get some pics up later tonight.

 

[psuiewalsh]

I think I have one, is that the one with the adjuster screw on the front of the brake cover? If you can ID it in a photo, I'll try to get some pics up later tonight.

The adjuster is in the saw case and the clutch cover only has one bar nut.

 

[bucknfeller]

The adjuster is in the saw case and the clutch cover only has one bar nut.

I don't have the whole saw so I definetly don't have that adjuster, may have the cover, I've got a box of them. I'll check after dinner. I do have a 41 parts saw, would that be the same adjuster?

 

[sefh3]

I'm looking for an 041AV Stihl parts saw. I'm needing a top cover, rear handle, and carb. I'm needing the AV version that has the dual post on the rear handle that the top handle coneects to it. I have parts to trade.

 

[tomdcoker]

Anybody have a decent circular Stihl MS390 name plate for the recoil?

I may have that. I will check tomorrow. I have one, but not sure for what model, so do not turn down any other offers. Tom

 

[bucknfeller]

Anyone have a clutch cover assembly and chain adjuster that fits a husky 242. parts, stuff and notes to trade.

Sorry to keep you waiting so long, looks like all the ones I have are for 55's and 41's. I have a few of these for the 41's if anyone needs them.
View attachment 272078View attachment 272079

 

[MechanicMatt]

Sorry to keep you waiting so long, looks like all the ones I have are for 55's and 41's. I have a few of these for the 41's if anyone needs them.
View attachment 272078View attachment 272079

If the Brake works, I can use one.