Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
8433jeff
Aftermarket connoisseur
What are the rules for this IA mini build?opcorn:
40cc, anything goes, has to be under 40cc.
There was talk of a "claiming" price of $75 or $100. I don't think thats set in stone.
As in anybody could buy the saw for $75 or a $100 bucks.
srcarr52
We can't stop here, this is bat country.
Soooo... I just picked up a 2171/372 with no top end. I need a muffler, clutch cover and p/c. I need more, but that should get me on the way. I'm open to any cylinder that bolts on and would of course like to trade off some of my piles of parts.
I have an OEM cylinder that has a small pit in the plating above the exhaust. It will run fine but its just not perfect.
I think I have a Sears 2.2 36cc saw here that has a scored piston if someone wants it for the build off let me know and I will post pictures. For that matter anyone cna have it for cost of shipping. I have no use for it. PH only
I also have one that runs but I would have to get something out of that one. Not a lot but not sure of desirability for mods on this for GTG use. May not be worth the time.
I also have one that runs but I would have to get something out of that one. Not a lot but not sure of desirability for mods on this for GTG use. May not be worth the time.
Metals406
Granfodder Runningsaw
Last edited:
tomdcoker
Addicted to ArboristSite
I have an 032 airfilter cover. Send me your address. Tom
8433jeff
Aftermarket connoisseur
Ed, I got a bar shaped package today. Thanks. Its friday night, family night, didn't even unwrap it yet. Thanks a lot bud.
No problamo.
Mastermind
Work Saw Specialist
I still need a P60...... :msp_smile:
Wagnerwerks
The underdog..
Mastermind
Work Saw Specialist
Don't we all!
Well some of us just want one.........I need one to sit next to this. :msp_biggrin:
Did you round up the 372 parts you needed?
PM Jeff, (P62 in the Pioneer thread). He had one to let go but that was a bit ago.
ramrat
ArboristSite Member
I think you guys need my pioneer holiday and p 26 part saws. will take trades
Mastermind
Work Saw Specialist
Braggart.
It's true.
This one looks to be a sweetie. It even has the period-correct P-61 clutch cover/brake assembly.
Pioneer P61 98cc Chainsaw Watch Video | eBay
I need a Silver starter housing for a Dolmar 115/116. I am building a saw and would hate to put a red one on it. Gots stuff and things to trade..........
Wagnerwerks
The underdog..
No, not yet. Maybe a cylinder. If anyone has any sets laying around, I don't need it to be perfect, they can be the one you almost put back on but weren't sure about using it for a customer saw...lol
I bought a 385 cylinder at the scrap yard the other day that's scored and I figured would clean up. It ended up having a few pock marks in the chrome so if anyone wants it for setup or something, let me know. It might work, but it there are a few of the spots. Yours for shipping or it goes back in my recycling bin.
vw_motorsports
ArboristSite Guru
Looking for
the rare and elusive Echo cs670 complete clutch cover
some 55 muffler bolts and nuts.
ms260 tank.....I have two bare 026 tanks to trade for the ms260 one
muffler for a husky 570/575/576
I have some 41/136 parts
stihl 028 mag tank
other stuff and cash
the rare and elusive Echo cs670 complete clutch cover
some 55 muffler bolts and nuts.
ms260 tank.....I have two bare 026 tanks to trade for the ms260 one
muffler for a husky 570/575/576
I have some 41/136 parts
stihl 028 mag tank
other stuff and cash
Husky top handle stuff and etc.
I've got motors for 335xpt and 338xpt. Do I sell or trade the motors for saws with smoked P/C? Also have good Stihl 039 tank and handle plus muffler. Stihl 026 pro stripped and cleaned with case split appears to be good no thread repairs, needs P/C and bearings and seals, sell or trade? Good Husky 350 tank/handle. Some Stihl 020t stuff. Also a running 031av, probably everyone here has thrown out a few of them. Don't think I'll part with the 038 mag II yet, got to run it last week and that's a pretty strong saw.
I've finally got a little heat in the garage and been stripping down saws, the parts saws seem to be piling up. I'm starting to lose track of just what I do have.
I've got motors for 335xpt and 338xpt. Do I sell or trade the motors for saws with smoked P/C? Also have good Stihl 039 tank and handle plus muffler. Stihl 026 pro stripped and cleaned with case split appears to be good no thread repairs, needs P/C and bearings and seals, sell or trade? Good Husky 350 tank/handle. Some Stihl 020t stuff. Also a running 031av, probably everyone here has thrown out a few of them. Don't think I'll part with the 038 mag II yet, got to run it last week and that's a pretty strong saw.
I've finally got a little heat in the garage and been stripping down saws, the parts saws seem to be piling up. I'm starting to lose track of just what I do have.
