Swap meet...

[nmurph]

I done quite a few tank seam welds with the soldering iron and they hold up just fine. I have also done dozens of top cover repairs with similar results.

 

[Wagnerwerks]

I done quite a few tank seam welds with the soldering iron and they hold up just fine. I have also done dozens of top cover repairs with similar results.

That's my preferred method too. I have one of the harbor freight plastic welders and it works very well for saw plastic. Just use a piece of an old part of the same kind of plastic and have at it.

 

[Roanoker494]

Looking for some MS660 small parts. Not expensive parts but the shipping is usually a killer when buying.

Starter Pawls
Thin washer that goes over the pawls
Spring retainer for the pawls
Recoil spring (not 100% necessary because I have random springs laying around that should work)
Screws for the recoil and chain brake handle
Screws for pto side of top cover

I could also use a good OEM piston, though I may just end up using a aftermarket.

 

[nstueve]

401 top end

anyone got a parts saw or top end Dolmar/Makita 401/400/410/411 or maybe a Dolmar ps-39 cylinder and piston?

PN: 028 131 160

Will take anything even if I need to clean with acid.

Got cash and some parts/bars/chains to trade.

 

[nmurph]

I am looking for a Walbro 199 (yes, that one!!). It can be one that has been rebuilt by Scott, in the trash can, or on a saw and working just fine.

 

[7hpjim]

281xp with full wrap Handle, muffler mod, Brand new OE heavy duty filter kit/cover.
Runs strong.
View attachment 279972
Will trade for a good running, similarly equipped Jonsered 65cc+, Czech .22 rifle, 3.5 Ben Franklins...

If I didn't already have 2 281s and 3 181s I would be on that one!!

 

[jbird77]

034

well in search of the black piece on the top of the handle where ur throttle is . Plus a bar cover for a 034 super , Hollar at me if u have any to part with .

 

[7hpjim]

I am looking for a Walbro 199 (yes, that one!!). It can be one that has been rebuilt by Scott, in the trash can, or on a saw and working just fine.

I have a faulty one that I replaced with the zama, has a new kit in it, pm me your addy

 

[SawGarage]

Looking for some MS660 small parts. Not expensive parts but the shipping is usually a killer when buying.

Starter Pawls
Thin washer that goes over the pawls
Spring retainer for the pawls
Recoil spring (not 100% necessary because I have random springs laying around that should work)
Screws for the recoil and chain brake handle
Screws for pto side of top cover

I could also use a good OEM piston, though I may just end up using a aftermarket.

Although these pieces are only a Couple $$ @ the dealer , I should have most of what you need sans the spring... Yes, including the piston.

I am looking for a Walbro 199 (yes, that one!!). It can be one that has been rebuilt by Scott, in the trash can, or on a saw and working just fine.

Neal, sent ya a PM..

 

[axlr8]

Anyone have a NON cat muffler for a 353 346 350 husky??? I have a saw here that is being a pain in my rear, and I want to get that issue eliminated.. and well, I wanna have it breathe. can be MM'd already or whatever. Got some misc parts, and maybe some foldy moldy paper!

Thanks a bunch!

 

[axlr8]

Got a Pair of milwaukee corded drills here that need to leave.. One has a chuck one has acord. Ones in pieces. Anyone want???? pm me if so...

 

[lumberjackchef]

Got a couple things from my buddy tonight that he needs to get rid of.

Homie sp16381-h5 Bar

Oregon 200slhd176 Bar

Neither bar has ever seen wood.

John Deere/Echo 80EV Parts saw

Looks like it got a tree dropped on the back handle or something. Great compression 150+, P/c looks nice and shiny through exhaust port. Good spark and lots of other good stuff on this thing. Fires right up of a prime.

Though someone might need it here rather than throw it on Evilbay!

 

[jerrycmorrow]

Got a couple things from my buddy tonight that he needs to get rid of.

Homie sp16381-h5 Bar

Oregon 200slhd176 Bar

Neither bar has ever seen wood.

John Deere/Echo 80EV Parts saw

Looks like it got a tree dropped on the back handle or something. Great compression 150+, P/c looks nice and shiny through exhaust port. Good spark and lots of other good stuff on this thing. Fires right up of a prime.

Though someone might need it here rather than throw it on Evilbay!

so how much for the oregon bar and for the saw?

 

[PogoInTheWoods]

Got a couple things from my buddy tonight that he needs to get rid of.

Homie sp16381-h5 Bar

Oregon 200slhd176 Bar

Neither bar has ever seen wood.

John Deere/Echo 80EV Parts saw

Looks like it got a tree dropped on the back handle or something. Great compression 150+, P/c looks nice and shiny through exhaust port. Good spark and lots of other good stuff on this thing. Fires right up of a prime.

Though someone might need it here rather than throw it on Evilbay!

PM inbound.

 

[roncoinc]

Partner oil pump

Trying to help a friend out,his oil pump broke in his R16
what fits :
R16
R20
R21
S50
S65
F55
F65

PM me is best,dont get out here to often
tnx.

 

[Scooterbum]

even a plastic tank?

If it's a small round hole, find a small sheet metal screw a little bit larger. Put some JB Weld on it and screw it in. Makes a rock solid repair.Better then just trying to fill it with epoxy only.

 

[tomdcoker]

I have a Poulan Pro 405 NOS piston and cylinder with wrist pin, wrist pin bearing and circlips. No rings. I will trade it for a GOOD McCulloch 850 fuel tank. Tom

 

[redhawk4178]

Homelite xl-102 Intake

I was trying to figure out how to get carb off and I broke the plastic piece. Any one have one i can buy View attachment 280218

 

[67L36Driver]

I was trying to figure out how to get carb off and I broke the plastic piece. Any one have one i can buy

I likely have one for postage. I built four runners out of seven carcasses, so have lots of 'leftovers'.

P.M. your address.

Carl.

 

[Wagnerwerks]

Just picked up a ts460 demo saw. Needs crank, bearings, piston kit, ?. I think the cylinder will be usable. I'll trade it for ?. I need 372/2171 parts yet. I'll be parting this out soon.