Swap meet...

[atlarge54]

Looking for 45mm cyl and muffler for Husky 350. Have good front and rear handles for Stihl 039 +misc, 020t stuff, 335xpt & 338xpt stuff (no intake boots), or just green.

EDIT-----stupid me need clutch drum/bearing and cover too.

 

[Rem 30-06]

I'm new here and i need a Craftman 2.8 parts saw

 

[rms61moparman]

I'm new here and i need a Craftman 2.8 parts saw

Pardner,

You are gonna have to be more specific than that!
There are a CRAPLOAD of Craftsman 2.8/46cc saws.


Mike

 

[Jacob J.]

Looking for 45mm cyl and muffler for Husky 350. Have good front and rear handles for Stihl 039 +misc, 020t stuff, 335xpt & 338xpt stuff (no intake boots), or just green.

I believe I have a jug and new muffler for 350...whatcha got for 020T?

 

[Rem 30-06]

oh sorry I need a craftman 2.9 turbo i think it's the same thing as a poulan 2900

I need all most everything to fix mine with. after i dropped a tree on it.

 

[whitedogone]

oh sorry I need a craftman 2.9 turbo i think it's the same thing as a poulan 2900

I need all most everything to fix mine with. after i dropped a tree on it.

I'll send you a match for it.

 

[Wagnerwerks]

oh sorry I need a craftman 2.9 turbo i think it's the same thing as a poulan 2900

I need all most everything to fix mine with. after i dropped a tree on it.

I believe I have everything you could need for that. I have a roached one pulled apart in the shop. Pm me with a list and post a picture of your saw for me.

Those saws are fantastic. Haters will hate.

 

[bplust]

455 Rancher Coil

I'm looking for a new coil for a Husky 455 Rancher. Lots of parts to trade or notes.

Also, what other models have a compatible coil?

On a related note, I've only worked on MAYBE a dozen 455's. I've seen three with toasted or failing coils. It might just be luck, but I've had dozens of 10-series (and larger cousins of) Macs in my hands, and have NEVER seen a bad points-style (or electronic for that matter, but I've had multiple times the amount of points-style saws in my possession than electronic) coil. Any reason why a coil 10x older is/seems to be more reliable?

Thanks in advance for any replies,

Bryan

 

[3000 FPS]

I'm looking for a new coil for a Husky 455 Rancher. Lots of parts to trade or notes.

Also, what other models have a compatible coil?

On a related note, I've only worked on MAYBE a dozen 455's. I've seen three with toasted or failing coils. It might just be luck, but I've had dozens of 10-series (and larger cousins of) Macs in my hands, and have NEVER seen a bad points-style (or electronic for that matter, but I've had multiple times the amount of points-style saws in my possession than electronic) coil. Any reason why a coil 10x older is/seems to be more reliable?

Thanks in advance for any replies,

Bryan

No Electronics.

 

[tbone75]

I'm looking for a new coil for a Husky 455 Rancher. Lots of parts to trade or notes.

Also, what other models have a compatible coil?

On a related note, I've only worked on MAYBE a dozen 455's. I've seen three with toasted or failing coils. It might just be luck, but I've had dozens of 10-series (and larger cousins of) Macs in my hands, and have NEVER seen a bad points-style (or electronic for that matter, but I've had multiple times the amount of points-style saws in my possession than electronic) coil. Any reason why a coil 10x older is/seems to be more reliable?

Thanks in advance for any replies,

Bryan

Coil off a 345 up to 359 will work , maybe more ?

 

[SawGarage]

looking for a side cover for a Stihl 019T, 191T and air filter.

and the

Echo cs670 complete clutch cover....looking for 3 months...sheez,

please PM as these posts get buried quick

I've been looking for a 2101 brake for 2 years!

Have you tried the echo dealer, Dave?

 

[cnice_37]

Anyone have a brake band and spring for a Husqvarna 42?

Anyone want a couple old Clintons? A D50 and a Bobcat D15.... probably would cost too much to ship but someone in Mass/ RI.

 

[SawGarage]

Mornin all I find myself needing a:
044 handle
Kill switch for a p7000

and a H-51 filter... Clip-in style:

Thanks guys!

 

[Scooterbum]

Yes I need to take it to a few places and see if I can dig up anything. I will let you know what I find.



Thanks for looking but Eccentric is right I need one off the briggs like this one. Just a little pricey if you ask me.

Briggs Stratton 8HP 190432 Blower Housing Shroud Recoil Rewind 491596 390391 | eBay

I have one if you still need it. Well it's close it's red and says 7HP on it.................

 

[nmurph]

I'm looking for a new coil for a Husky 455 Rancher. Lots of parts to trade or notes.

Also, what other models have a compatible coil?

On a related note, I've only worked on MAYBE a dozen 455's. I've seen three with toasted or failing coils. It might just be luck, but I've had dozens of 10-series (and larger cousins of) Macs in my hands, and have NEVER seen a bad points-style (or electronic for that matter, but I've had multiple times the amount of points-style saws in my possession than electronic) coil. Any reason why a coil 10x older is/seems to be more reliable?

Thanks in advance for any replies,

Bryan

Coil off a 345 up to 359 will work , maybe more ?

Bryan, are you sure it's the coils failing? That very coil is used on everything from the 334 to the 390, and the 455/460. I have a limited coil if you want it.

 

[atlarge54]

photo test

View attachment 282832 testing

 

[Mastermind]

View attachment 282832 testing

It worked.......now send me those parts.

 

[Big_Wood]

looking for an 01 flywheel and black coil for a 3120. i have a spare black coil so just the flywheel would do.


i have some stuff to trade

 

[bplust]

Bryan, are you sure it's the coils failing? That very coil is used on everything from the 334 to the 390, and the 455/460. I have a limited coil if you want it.

Not 100& sure yet. The owner said it was quitting once warm and wouldn't start until cooled, so I assumed coil before I got it. I changed the plug out, and let it idle through a tank of fuel while I was working on something else last night. It does run a tad rough, but has no air leaks. I'm gonna go do some cutting with it to see if I can produce the symptoms the owner mentioned.

 

[bplust]

Bryan, are you sure it's the coils failing? That very coil is used on everything from the 334 to the 390, and the 455/460. I have a limited coil if you want it.

Ya, nevermind, it was just a plug, and the adjustment was a bit off. I just ran two tanks through it, and had no problems. I was very impressed with the fuel economy, but then again, my go-to's are Pro Mac 700's and 7-10a's.

Thanks anyways!