Swap meet...

[Jacob J.]

Mornin' gents...

I'm still looking for a husky 51-55 clip-on filter, Partner 7000 kill switch and a basket of $20's...

I'm ALSO needing a Homelite bar.... to fit a Homie 245. in .325 pitch.... please...



too much to trade

Your inbox is full...again.

 

[SawGarage]

Your inbox is full...again.

What the H*LL ELSE is NEW :bang:

I'm not sure why it shrinks by the hour....

 

[Modifiedmark]

Got several new but off brand to me sprockets and a couple other things I thought I would offer up before they head to auction.

1- Total 188-A7 3/8's x 7 that seems to be for a Stihl 030, 031,041

1-Total N266-A7 3/8's X 7 that seems to be for a Jonsered 45,451,49sp,50,51,52 and 521 probably a little harder to find in 3/8's X7?

1-Oregon 32059X 3/8's X 7 spur for Husqvarna 181,185,281,285,288,298,394,395,1100,2100,2101

1-Oregon 28001 3/8's LP X 6 Fits a ton of the little Trail/quadra/Frontier type saws, Jonsered 36, 361, Husky 33,34,35,37,38 Partner Mini P, 1612 etc, Pioneer P-12, Skil...

Got a used one that fits all above in good shape but 1/4" pitch.

1-Oregon 29888 3/8's LP X 6 that fits a ton of little Macs like 2000, 3000 3200 and 3500 series, Mac 110-140, Mini Mac PM 310-340 Titan 35-40 and more

2-McCulloch 215252233 3/8's LP X 6 sprockets to fit 2000, 2100, 2300, 3500, 3800, Mac Cat. I think these fit all the same as the Oregon above.

1- Oregon 55-109 replacement fuel cap for a Stihl FS80 new style.

1-Stihl 034, early 036 air filter brand new.


Will swap for green paper or misc parts, Always looking for Poulan/Echo mount 24" .050 bars as well as large Husky 28" .050 bars, and could use a 32" 105DL .063 chain or two.

 

[WoodChuck'r]

Looking for a black Craftsman 3.3 clutch cover.


Anyone have one.....??

 

[RedneckChainsawRepair]

Looking for a black Craftsman 3.3 clutch cover.


Anyone have one.....??

I know the fix If this is good enough. :msp_tongue:

View attachment 283675

 

[WoodChuck'r]

Yer the best K. :msp_thumbup:



I'll shoot ya an email.....

 

[Brushwacker]

Got several new but off brand to me sprockets and a couple other things I thought I would offer up before they head to auction.

1- Total 188-A7 3/8's x 7 that seems to be for a Stihl 030, 031,041

1-Total N266-A7 3/8's X 7 that seems to be for a Jonsered 45,451,49sp,50,51,52 and 521 probably a little harder to find in 3/8's X7?

1-Oregon 32059X 3/8's X 7 spur for Husqvarna 181,185,281,285,288,298,394,395,1100,2100,2101

1-Oregon 28001 3/8's LP X 6 Fits a ton of the little Trail/quadra/Frontier type saws, Jonsered 36, 361, Husky 33,34,35,37,38 Partner Mini P, 1612 etc, Pioneer P-12, Skil...

Got a used one that fits all above in good shape but 1/4" pitch.

1-Oregon 29888 3/8's LP X 6 that fits a ton of little Macs like 2000, 3000 3200 and 3500 series, Mac 110-140, Mini Mac PM 310-340 Titan 35-40 and more

2-McCulloch 215252233 3/8's LP X 6 sprockets to fit 2000, 2100, 2300, 3500, 3800, Mac Cat. I think these fit all the same as the Oregon above.

1- Oregon 55-109 replacement fuel cap for a Stihl FS80 new style.

1-Stihl 034, early 036 air filter brand new.


Will swap for green paper or misc parts, Always looking for Poulan/Echo mount 24" .050 bars as well as large Husky 28" .050 bars, and could use a 32" 105DL .063 chain or two.

Hey Mark, I'd like to get that 034 filter from you. I think I have an almost like new strip of 063 close to 105 links. Have a lot of other loops and bulk chain mostly new. Been working west of San Pierre, maybe can catch up with ya this week. Expect a call soon, sometime after I check for the chain.

 

[Modifiedmark]

Hey Mark, I'd like to get that 034 filter from you. I think I have an almost like new strip of 063 close to 105 links. Have a lot of other loops and bulk chain mostly new. Been working west of San Pierre, maybe can catch up with ya this week. Expect a call soon, sometime after I check for the chain.

John your second in line if the deal falls through.

 

[PogoInTheWoods]

Yeah, I know. Just thought I'd toss it out.

Ran into some challenges with an 066 rebuild and am now in the mode of throwin' good money after bad at this thing.

Any help will be graciously and gratefully accepted and appreciated.

Have $$$, but not likely much else of use to anyone who just happens to have a spare 066 crank and/or complete case layin' around.

I believe I'm covered on this. Thanks for the responses.

 

[huskydude]

Anyone have an efco 962 piston/cylinder or just cylinder? I thought I was going to be able to save the cylinder but one area punched through the plating

162 should be the same from what I can tell. I have all kinds of crap to trade. Or cash if need be.

giving this another shot...

 

[Jacob J.]

I'm looking for a nice Stihl 064 crankcase or early 066 case, just need the case halves- no crank. I got parts and $$. thanks...

 

[Mastermind]

Mark is this one gone yet?

1-Oregon 32059X 3/8's X 7 spur for Husqvarna 181,185,281,285,288,298,394,395,1100,2100,2101

JJ, I'll look for a crank for you.....I might have one.

 

[Jacob J.]

Mark is this one gone yet?

1-Oregon 32059X 3/8's X 7 spur for Husqvarna 181,185,281,285,288,298,394,395,1100,2100,2101

JJ, I'll look for a crank for you.....I might have one.

I have the crank, I just need the case halves Randy. Thanks though...

 

[Mastermind]

I have the crank, I just need the case halves Randy. Thanks though...

Oh hell I just re-read your post.....I thought it said a nice 064 crank or early 066 case halves. I'm dumbed up this morning and stuff......

 

[bplust]

I'm looking for two clutch covers with tensioners for 10-series Macs. I don't care about appearance or chainbrakes, I just need working covers. Breaks are acceptable within reason. Short covers are preferred, but I'll take long ones if that's all I can get.

Many parts to trade.

Thanks in advance.

 

[AU_K2500]

looking for a Walbro carb for an 026. older model with out compensator and adjustable high jet. have moldy green paper. already bought one but its crap, and had a fixed high jet....need another! thanks for any help. PM me if you can help.

 

[thomas1]

looking for a Walbro carb for an 026. older model with out compensator and adjustable high jet. have moldy green paper. already bought one but its crap, and had a fixed high jet....need another! thanks for any help. PM me if you can help.

Edge & Engine may still have new ones for $60.

 

[54stude]

I'm looking for a nice Stihl 064 crankcase or early 066 case, just need the case halves- no crank. I got parts and $$. thanks...

I have a set of 064 cases with a bad crank in them, PM me your address.

 

[Trx250r180]

anyone have a stock muffler cover for a 660 ? trying to quiet down the saw mill

 

[Mastermind]

anyone have a stock muffler cover for a 660 ? trying to quiet down the saw mill

Weld a pipe on it with baffle slits. MX style. It really works great.