Swap meet...

[Gearhead1]

I have a Stihl TS400 cut-off saw to trade. This was a runner until someone straight-gassed it. Now it has only about 80 p.s.i. compression, and probably a bad piston and cylinder. I'm looking for larger cube McCullochs, like 4-10, 5-10, 6-10, 7-10, PM60, CP70, 200, 250, 300, 440, 450, 550.....something along those lines.

View attachment 283912View attachment 283913

 

[Brushwacker]

I have a Stihl TS400 cut-off saw to trade. This was a runner until someone straight-gassed it. Now it has only about 80 p.s.i. compression, and probably a bad piston and cylinder. I'm looking for larger cube McCullochs, like 4-10, 5-10, 6-10, 7-10, PM60, CP70, 200, 250, 300, 440, 450, 550.....something along those lines.

View attachment 283912View attachment 283913

I have 2 PM610's, 1 was working fine when I was reaching up cutting a limb, heard a noise and let off on the throttle, but it locked up before I could get to the switch,haven't checked it out, not sure if it seized or something come loose and lodged some where. Forgot what the other might need, but I'm thinking it turns over and has compression.
Also have a couple Mc 250's, 1 I had started about a year ago, the other no spark. Would trade either pair.

 

[Bill G]

I have a Stihl TS400 cut-off saw to trade. This was a runner until someone straight-gassed it. Now it has only about 80 p.s.i. compression, and probably a bad piston and cylinder. I'm looking for larger cube McCullochs, like 4-10, 5-10, 6-10, 7-10, PM60, CP70, 200, 250, 300, 440, 450, 550.....something along those lines.

View attachment 283912View attachment 283913

I would definitely trade some McCulloch saws for the TS400. I should have a decent array to chose from.

Bill

 

[Jordan3605]

Looking for the Brake Assembly for a Husqvarna 50 Rancher (White Top) .
Don't know much about husqvarna compatibility but it may be a very common part? might not be....
Any help would be great

 

[Trx250r180]

Weld a pipe on it with baffle slits. MX style. It really works great.

sort of like dc did on this one ? View attachment 283950

 

[nstueve]

anyone hiding a good 028 top end??? I need one!

got parts, chain, cash and such to trade...

 

[Brad2185]

Looking for bartering deal for a Stihl 201t

Hey everyone, Im wanting to get my hands on a decent used stihl 201t. I have a husky 2100 that I was possibly gonna put up for barter for one. If anyone has what Im looking for, send me a PM. I may have other barter saws to offer instead. Inbox is completely empty...:msp_tongue:

 

[husqvarnaguy]

Anyone have an 026 oiler? If you have something PM me.

 

[AU_K2500]

Anyone have an 026 oiler? If you have something PM me.

PM sent

 

[SawGarage]

anyone hiding a good 028 top end??? I need one!

got parts, chain, cash and such to trade...

NOS interest you?? :msp_tongue:

 

[atpchas]

Have the proverbial "saw in a box," a Husky 137. It looks like a piece of the big end bearing got loose and wiped out the P&C. The plastics are in beautiful shape and most everything appears to be present, including the dead crank, piston, and cylinder. There is a collection of screws and such not pictured. I'd like to swap for something more useful - 3003 bars, chain, 026/044/046 parts - surprise me. Would prefer if all parts went to the same location, but will consider individual parts requests if it comes to that.

 

[albert]

Looking to trade for nice late 026 top and airfilter covers. I have some good ms 270-280, 290 parts. Also have other various stihl and husky and jonsered parts. Pm me with needs.

 

[Duke Thieroff]

Thought I'd give everyone a crack at this stuff here before I move it along otherwise...


Makita DCS 52, I believe. Seems to run good, but would certainly benefit from a fuel line replacement and a carb kit.

It is in fair shape but needs the bar studs repaired. It seems the original owner was quite the ham fist and literally pulled the bar studs out of the case. I have one of the bar studs, you'll need the second one. There is a crack in the upper handle bar mount cover. Oiler seems to work, but the oiler line appears to be missing something, likely a small metal tube (I haven't looked at the IPLs). You can see in the pics, I believe.

[video=youtube;ddd1IpXLxVE]http://www.youtube.com/watch?v=ddd1IpXLxVE&feature=share&list=UUNTjfw93oY19yAntoj-s1uw[/video]

Will trade for other saws, or American Paper

 

[Duke Thieroff]

Husky 346 NE

This little saw looks pretty good. Seems to run well, I made a few cuts with it with no issues. I took the covers off to do some cleanup and everything looked good under there. .325 setup with rim sprocket. Pulled the muffler and it looked good. There was one small vertical scratch that likely wouldn't hang a fingernail. Not scoring, just some debris ingestion. Non-Cat Muffler has not been modded, limiter caps in place. This is a small, fast and smooth saw.

[video=youtube;CgYUzZjILBI]http://www.youtube.com/watch?v=CgYUzZjILBI&feature=share&list=UUNTjfw93oY19yAntoj-s1uw[/video]

Bigger saws welcome, as well as American Paper

 

[nmurph]

Husky 346 NE

This little saw looks pretty good. Seems to run well, I made a few cuts with it with no issues. I took the covers off to do some cleanup and everything looked good under there. .325 setup with rim sprocket. Pulled the muffler and it looked good. There was one small vertical scratch that likely wouldn't hang a fingernail. Not scoring, just some debris ingestion. Non-Cat Muffler has not been modded, limiter caps in place. This is a small, fast and smooth saw.

[video=youtube;CgYUzZjILBI]http://www.youtube.com/watch?v=CgYUzZjILBI&feature=share&list=UUNTjfw93oY19yAntoj-s1uw[/video]

Bigger saws welcome, as well as American Paper

The plastic AV coupling goes between the wrap bar and the AV spring on the cylinder.

Looks nice...how much dinero are you asking?

 

[Duke Thieroff]

757 Shinny...

Has some hardware issues that can be fixed easily by inserts....Other than that a good running saw.

 

[Duke Thieroff]

Btw, I need a nice 288 clutch cover. Some nice plastics would be good too.

 

[Jacob J.]

Btw, I need a nice 288 clutch cover. Some nice plastics would be good too.

Man, you just want everything...

 

[Duke Thieroff]

Man, you just want everything...

Hordes and hordes of 288 guys Hoard and Hoard. It's true, Mr. J

Those parts are not rare, or even uncommon. Every chainsaw enthusiast in the world has a soft spot for ye olde 288.

Same goes with 044/046 parts

 

[67L36Driver]

Some people are just not qualified to own tools.