Swap meet...

[DSS]

Ok... need to jettison some parts to clear some room...



036/034 crank case, muffler, oiler, air filter cover, and maybe a few other bits and pieces...



031 parts saw 90% there with good P&C... just don't have time for building it.



taking trades on any of it or make me an offer.



Need Dolmar-Makita PS-36/41/45 cylinder! PLEASE!

I've got a DCS 400 or 401, I forget the number, top end. Is this any good to you?

 

[little possum]

I have a some 3120 parts Id like to unload. Mainly a crankcase, gastank, handle, couple of plastic pieces. No carb, jug, piston or muffler..

 

[excess650]

I have a some 3120 parts Id like to unload. Mainly a crankcase, gastank, handle, couple of plastic pieces. No carb, jug, piston or muffler..

PM sent.

Any parts or pieces you need?

 

[little possum]

^2nd in line so far. Headin out to take a better look at it. Will get back with yall in a few.

 

[Jacob J.]

^2nd in line so far. Headin out to take a better look at it. Will get back with yall in a few.

I'd be interested in that too.

 

[nstueve]

I've got a DCS 400 or 401, I forget the number, top end. Is this any good to you?

not the top end but the side covers maybe... PMed...

Looking for the 45cc top end to this alien lookin thing. (I have 3 spare dcs34's with MIA cylinders if anyone is interested)
View attachment 284408

I can use some of the 056 parts for sure, at least the Mag top end. What are you looking for? (other than a PS-36/41/45 cylinder which I'll never have.)

any makita or dolmar stuff or interesting trades? My Fast tach went MIA, been wanting a long bar for the 076, I like Total Super Bars Hmmm, what else... Intrigue/PM me!

I kinda want all the 056 stuff to disappear at same time if it goes. I don't want to have delinquent crankcases and halvsie saws that I'll never use, sitting around... I try to disperse spare parts I can't use right away b/c we may or may not be moving soon (if we find a house we like)... So I try to keep the CAD hoard down to a manageable amount to move with. :msp_biggrin:
here is the pics of the 056 stuff. I think i'm down a crank case or two. sorry bad pic but I don't really want to haul it all out again... I can probably recover the crankcases if need be.

Here is the 132s if anyone is interested.

 

[Arrowhead]

Do any of you Pioneer guys have a P42HP intake manifold that's not cracked? I've got a couple of NOS Pioneer mufflers,loops of chain, and some other stuff to trade.

I've got NOS and used... pm me your addy and choice and I'll get one headed your way.

 

[Brushwacker]

pretty sure I can find you a 034/036 carcass for that good top end and it will be cheaper for you in the long run that piece mealing it together from scratch.

Ed,
036/034 stuff inbound to you.

Still have the following to trade.
132s Efco
056 box-o-stuff (for the right bid/trade)
031 90% there with good top end

Hmm, I recently bought an Efco rear handle 137 on ebay, turned out not very structurally sound, been wrecked and cobbled back together. I expect the carb, engine etc. may be the same as your top handle, if so, may be interested in it.

 

[redunshee]

Poulan 3450 Tank/Handle Assembly

Friend broke the handle off his 3450. Anyone have a tank/handle assembly they are willing to part with?

Bob

 

[Wagnerwerks]

Friend broke the handle off his 3450. Anyone have a tank/handle assembly they are willing to part with?

Bob

Do you know what other models fit?

 

[Wagnerwerks]

I'm still looking for a large mount husky bar. 20-24". Prefer with a bucket of like new chains, but you know.

Could also use a p/c for a shindiawa 352/360/377.

I have a pile of small mount husky bars in all sizes, 16-20" Mac and poulan large mount bars, homelite bars of all varieties from 16-?"

I also have a pile of xl parts, sezao parts, 150 parts, Mac 610 parts. Some poulan saws in the newer variety and lots of 3400 parts, a bunch of micro parts, lots of s25da stuff, 306 poulan parts, 024 parts, husky 50 rancher stuff, echo 452, shinny 500 and 377, partner 450, the list goes on....

AND.. I saved the best for last........ The ever popular trading fodder of the great AS members.......... MINI MACS!!!!

 

[jerrycmorrow]

I'm still looking for a large mount husky bar. 20-24". Prefer with a bucket of like new chains, but you know.

Could also use a p/c for a shindiawa 352/360/377.

I have a pile of small mount husky bars in all sizes, 16-20" Mac and poulan large mount bars, homelite bars of all varieties from 16-?"

I also have a pile of xl parts, sezao parts, 150 parts, Mac 610 parts. Some poulan saws in the newer variety and lots of 3400 parts, a bunch of micro parts, lots of s25da stuff, 306 poulan parts, 024 parts, husky 50 rancher stuff, echo 452, shinny 500 and 377, partner 450, the list goes on....

AND.. I saved the best for last........ The ever popular trading fodder of the great AS members.......... MINI MACS!!!!

you got the blue electronic coil for the sezao?

 

[Wagnerwerks]

you got the blue electronic coil for the sezao?

Lol.. No! Didn't I send you all I had? The only blue one I have is on the saw I have on eBay right now. If I find another, I'm gonna mail it to you with out even asking if you need it.

 

[nstueve]

Hmm, I recently bought an Efco rear handle 137 on ebay, turned out not very structurally sound, been wrecked and cobbled back together. I expect the carb, engine etc. may be the same as your top handle, if so, may be interested in it.

I honestly couldn't tell you... Never had an Efco besides this one.

 

[8433jeff]

Hmm, I recently bought an Efco rear handle 137 on ebay, turned out not very structurally sound, been wrecked and cobbled back together. I expect the carb, engine etc. may be the same as your top handle, if so, may be interested in it.

If you mean a 147, no.
If you mean a MT3700, no.
If you mean a 136, no, or a MT3600. Or any of the Deere branded ones, as there was no Deere top handle built by Efco.
There is no rear handle saw equivalent to the 132.
They do share the same starter rope.

I'd be interested in more pics and details of each.

 

[jerrycmorrow]

Lol.. No! Didn't I send you all I had? The only blue one I have is on the saw I have on eBay right now. If I find another, I'm gonna mail it to you with out even asking if you need it.

yeah, that's what i thought. just checking. you never can tell. i'd appreciate that fer sure.

 

[tbone75]

Looking for a 371XP or 372XP cylinder or P&C. Got things to trade or funny paper. Will take one that needs cleaned up !

 

[bplust]

Looking for a 371XP or 372XP cylinder or P&C. Got things to trade or funny paper. Will take one that needs cleaned up !

Funny paper? If it's Monopoly money, I only take $500 bills. I might have a top end, I'll get back to you tonight on that.

 

[tbone75]

Funny paper? If it's Monopoly money, I only take $500 bills. I might have a top end, I'll get back to you tonight on that.

Monopoly money is worth more ! :msp_scared:

 

[husqvarnaguy]

Any one got a 266 carb? PM me if you have something.