Swap meet...

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looking for a 371XP or 372XP cylinder or P&C. Got things to trade or funny paper. Will take one that needs cleaned up !

i got a 371 and a 372 cylinder. both with oem pistons and rings. pulled from parts saws but are in nice shape. the 372 p/c will be harder to let go for me but for the right trade something may happen :). what do you have in the line of 346 parts?
 
Husky 365/371/372 air filter

I found some fines in the carb and cursed rhe new air filter,ordered another new one.
looked at THIS one and found a small hole poked in the corner !! :)
a small dab of black rtv and it will be as good as new.
only been on saw for about one tank ..

nedd air filters for.
Dolmar 111
Dolmar 6000i
partner S50.
and no,i dont know what else fits :(
PM me,i dont get out much..


attachment.php
 
Husky pistons

395,taken out of jug with broken muff bolt hole.
rings,wrist pun and clips.
pic of exhaust side shows a scratch..does not show on rings.
a pencil erasure took off most of it,scotch pad will take off the rest,left it on there so you would know.
wont catch a nail,pic makes it look bad but it's not,i would have %100 faith in it.
money back gurantee :)


attachment.php


372 piston.
from a saw with broken cyl fins,was replaced with a top end kit.
rings,pin,clips.
pic of exhaust side.

attachment.php



365
replaced with a BB kit,,dont know WHAT happened to the jug ?? lost it ??
bare slug,no nuttin..must have lost those parts too ??

attachment.php



262
Golf
NIB.


attachment.php


need airfilters like in my last post.
need 372 choke pull and rubber grommet.
pm me,i dont get out much.
 
Well first a well deserved thanks and I NEED PARTS!!

I'd like to thank

Logging22 and psuiewalsh for hooking me up with some parts that I needed....thankyou!!:rock:


Now, I need some parts, drum roll please

Stihl 019t, clutch cover, air filter, oil cap
Echo CS670 clutch cover
intake boots 335xpt
stihl ms260 carbs
Husky 55 muffler bolts


I have 028 parts and 020 parts as well...to trade and us dollars and some euros kickin' around.
 
Looking for a Dolmar 120SI parts . Need muffler assy and tank assy to start with. Have some parts and stuff to trade.

Offering my Sachs Dolmar 120 for trade. Its currently at a freinds in Lombard, IL but it should be back here in about a week or less. Only issue I've with it, in warm to hot weather (+70ish) it will quit after about 3/4 tank of fuel and then not start and go good for about 45 minutes. Runs and works fine in lower temps. Its been like that the whole time I owned it about 2 years, haven't tried to fix that, been using it as is, on and off through the year. Warm weather I carry an extra saw or 2, and take turns. It shares parts from multiple 120's, 1 cover says, SI, another 68cc but I expect its less, don't know for sure, bought it off ebay. Has a neat, sound patch on the gas tank. A few dings and scratches here and there, but it has been and feels structurly sound. Interested in Stihl stuff, 034 and up, preferably hand brake models, new .050 gauge semi chisel non safety chain bulk or loops, 20"+ Stihl bars, or who knows what.
 
I just picked up a poulan 2075 that is in nice shape but it has been robbed for parts. I am either looking for a complete parts saw or the starter cover with all the starter parts, top cover and air filter...maybe more. All the cheaper 1st generation 2375 wildthings, 1950, 2050 and such will interchange. PM if you can help me out.
 
Offering my Sachs Dolmar 120 for trade. Its currently at a freinds in Lombard, IL but it should be back here in about a week or less. Only issue I've with it, in warm to hot weather (+70ish) it will quit after about 3/4 tank of fuel and then not start and go good for about 45 minutes. Runs and works fine in lower temps. Its been like that the whole time I owned it about 2 years, haven't tried to fix that, been using it as is, on and off through the year. Warm weather I carry an extra saw or 2, and take turns. It shares parts from multiple 120's, 1 cover says, SI, another 68cc but I expect its less, don't know for sure, bought it off ebay. Has a neat, sound patch on the gas tank. A few dings and scratches here and there, but it has been and feels structurly sound. Interested in Stihl stuff, 034 and up, preferably hand brake models, new .050 gauge semi chisel non safety chain bulk or loops, 20"+ Stihl bars, or who knows what.

Pm sent
 
I'd like to thank

Logging22 and psuiewalsh for hooking me up with some parts that I needed....thankyou!!:rock:


Now, I need some parts, drum roll please

Stihl 019t, clutch cover, air filter, oil cap
Echo CS670 clutch cover
intake boots 335xpt
stihl ms260 carbs
Husky 55 muffler bolts


I have 028 parts and 020 parts as well...to trade and us dollars and some euros kickin' around.

I DO have the 55 muffler bolts, PM your address
 
I just picked up a poulan 2075 that is in nice shape but it has been robbed for parts. I am either looking for a complete parts saw or the starter cover with all the starter parts, top cover and air filter...maybe more. All the cheaper 1st generation 2375 wildthings, 1950, 2050 and such will interchange. PM if you can help me out.

What colors do you want?? PM me with your preferences.
 
Im looking for a husky 51 carberator ,filter housing, choke and throttle rod and the piece that holds the throttle rod down also a stihl 028 carb and air filter got some 046 parts and green stuff
 
Back
Top