Swap meet...

[mdavlee]

Bump .... I KNOW there's a carb out there .....

Anybody have an outer spike (the smaller one) for a 371/372 .......... PLEEEEEEEEEEEEZE?

Let me look. If I still have one it's yours for the shipping.

 

[Warped5]

Let me look. If I still have one it's yours for the shipping.

Thank you!

 

[Saw Dr.]

Still looking for poly 066 crank.

Sent from my C771 using Tapatalk 2

Looks like Randy has one. Kinda short on one end though. Lol

 

[psuiewalsh]

Looks like Randy has one. Kinda short on one end though. Lol

I am watching that one mine has no bearings in the middle

Sent from my C771 using Tapatalk 2

 

[Jordan3605]

Husky 385 parts needed:
Chainbrake
Clutch Cover

To trade:
green paper and mini macs...........

 

[Stihlofadeal64]

Looking for a Stihl MS260 crankcase (flip cap style). pm me with what you have. Thanks

 

[GrizzlyAdams86]

Looking for a good coil for a Echo 440EVL. Have $$$ to trade. Thanks.

Still looking.

 

[Big Dan]

I'm looking for a good serviceable .404-7 six-spline rim (for those that don't know.......some big Homelites used six-spline rather than seven-spline rims). Oregon used to make these rims for Homelite. Other manufacturers may have as well. I prefer to run .404-7, even on these beasts.

Alternatively, I'm looking for seven-spline drum that will work on a Homelite 2000/2100. I believe a rim drive drum for/from a Homelite 650/750 will work. For now, I have taken the six-spline drum and .404-8 rim from my Super 2100 'project' and put it on the 2000A (along with a .404-8 six spline rim).

I also am in need of:

-A 106DL .404-.063G loop of chain.

-A 107DL loop of .404-.063G. I have two different 36" bars...........with 107 DL being too long on one of them (dammit). 106DL may work on the 107DL bar.

-A 70DL loop of 3/8-.058G chain.

-A rim drive drum for a Poulan 3400-4000 series saw. Oregon 28187X. Herr WC-8058. Poulan 48063.

-Two rim drive drums for a Poulan 4200-5200 and 306-245 (same drum for both saw families.......I need two of them). Oregon 23706X. Poulan 530010007.

For trade I have:

-A 20" 3/8-.058G Oregon PowerMatch replaceable sprocket nose D009 large Husqvarna mount bar. Rails and tip are in very good shape. Some paint left on the bar.

-Various Homelite/Mac/Poulan parts (including some bars).

-Some folded green musty presidential pictures.

-An NOS .404-8 spur drum (I believe it's for an XP1000 thru 1050 Homelite) that a prior owner had installed on my Homelite 2000A. Clutch dragged when the clutch was installed (because the shoes are wider on the 2000A clutch), but the saw was never ran before I took that drum off. Has a new bearing and race.

-New Windsor 3 rivet 3/8" pitch sprocket noses.

-New .404 pitch Oregon single rivet sprocket noses.

Hey Aaron,if you can find me a couple of loops of 3/8 - .058 full chisel skip with 72DL,I'll trade you a new 25' roll of .404-.063 full chisel with presets and tie straps. I might have a drum and rim for the 3400-4000 too.

 

[Stihlofadeal64]

Looking for a Stihl MS260 crankcase (flip cap style). pm me with what you have. Thanks

bump...surely someone has one (am I hearing an echo in here).

 

[Wagnerwerks]

bump...surely someone has one (am I hearing an echo in here).

I just got a couple 026 cases... Thread in cap...

 

[bplust]

Got some new bars I don't need.

If you look at the photos, you can see that I marked the sleeves that they come in with numbers. Here's what they are:

View attachment 295751View attachment 295754View attachment 295755View attachment 295756[View attachment 295758ATTACH=CONFIG]295757[/ATTACH]


2. GB Pro .375 58 gauge 18" Replaceable Greaseable Sprocket Nose # 26418 (Fits many models, see the second of the two photos of the sleeves)
5. Total .375 58 gauge 16" Greaseable Sprocket Nose #481WL4 (Says "Jonsered" on the sleeve)
6. Total .375 50 gauge 16" Greaseable Sprocket Nose #256ML3 (Says "Oly/Stihl" on the sleeve)
7. Total .375 50 gauge 16" Greaseable Sprocket Nose #677ML3 (Says "Echo/Poulan" on the sleeve)
8. Total .375 50 gauge 16" Greaseable Sprocket Nose #321WL4 (Says "Homelite" on the sleeve)
9. Total .325 63 gauge 16" Replaceable Greaseable Sprocket Nose #206SR2 (Says "Stihl" on the sleeve)
10. Total .375 50 gauge 16" Greaseable Sprocket Nose #200WL4 (Says "Stihl" on the sleeve)
11. Total .375 50 gauge 14" Greaseable Sprocket Nose #452ML3 (Says "Frontier" on the sleeve)
12. Total .25 50 gauge 14" Greaseable Sprocket Nose #003ML1 (Says "Echo/Poulan" on the sleeve)
13. Total .375 50 gauge 14" Greaseable Sprocket Nose #003ML3 (Says "Echo/Poulan" on the sleeve)
14. Total .375 50 gauge 12" Greaseable Sprocket Nose #451ML3 (Says "Frontier" on the sleeve)

I'm looking for McCulloch 7-10a/ Pro Mac 700 parts/saws. Partner p100/McCulloch Pro Mac 1000 parts/saws as well. And really anything. Projects, parts saws, parts, etc.

Email me at bplust AT gmail.com or PM me if you're interested. I'll edit my listing as bars are gone.

Bryan

Bump

 

[Eccentric]

Hey Aaron,if you can find me a couple of loops of 3/8 - .058 full chisel skip with 72DL,I'll trade you a new 25' roll of .404-.063 full chisel with presets and tie straps. I might have a drum and rim for the 3400-4000 too.

Dan that's a fantastic deal that you're offering me. I'll take you up on that. Will get back to you on the details soon.

 

[Uncle Rico]

MS660 Parts

Hi there, I'm in the market for following parts for my Stihl MS660, used are fine if in decent shape:

Clutch/bar cover
full wrap handle
flywheel (poly)

I have a couple of 36" bars to trade and cash.

Windsor 404 x 063 Husky/Dolmar mount (not sure what else it fits).
Oregon Power match 404 x 063 Homelite mount (it doesn't have the sproket tip) I'll get pictures if you're interested.

Thanks,

Richard

 

[Warped5]

Bump .... I KNOW there's a carb out there .....

Anybody have an outer spike (the smaller one) for a 371/372 .......... PLEEEEEEEEEEEEZE?

Re-bump!

 

[DSS]

Re-bump!

I struck out on the carb Ted. Sorry. Is it an HDA?

 

[Warped5]

I struck out on the carb Ted. Sorry. Is it an HDA?

Yessir. HDA-79-1.

Thanks for checking, Chris.

 

[DSS]

HDA 75 Ted. Looks like it will fit if you swap the choke shaft.

Yours if you want it.

 

[Warped5]

HDA 75 Ted. Looks like it will fit if you swap the choke shaft.

Yours if you want it.

Send it on, young man!

Thanks much!

PM sent!

 

[Eccentric]

Hi there, I'm in the market for following parts for my Stihl MS660, used are fine if in decent shape:

Clutch/bar cover
full wrap handle
new caber rings (is there a sponsor in the midwest - or just closer to OH than CA - with good prices on these?)

I have a couple of 36" bars to trade and cash.

Windsor 404 x 063 Husky/Dolmar mount (not sure what else it fits).
Oregon Power match 404 x 063 Homelite mount (it doesn't have the sproket tip) I'll get pictures if you're interested.

Thanks,

Richard

Which Homelite mount (probably D096/D196 XL-series Homelite mount........but could be the F014 large Homelite mount)?

 

[Warped5]

Bump .... I KNOW there's a carb out there .....

Anybody have an outer spike (the smaller one) for a 371/372 .......... PLEEEEEEEEEEEEZE?

Carb is now on its way from everyone's favorite bovine.

Stilllllllll lookin' for that outer spike! Thanks!