Neal, Thank you for the offer. I have a HF 2.5 on the way. I figure that I will find plenty of uses for it. Any suggestions on the fluid/method? I read here that a glass jar with some sort of cleaner may be a good method?
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
Neal, Thank you for the offer. I have a HF 2.5 on the way. I figure that I will find plenty of uses for it. Any suggestions on the fluid/method? I read here that a glass jar with some sort of cleaner may be a good method?
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,171
I use a glass jar filled with carb cleaner. Make sure you don't tighten the lid!!!
I also recommend you use some type of sealant around the keypad on the USC. It will make it last much longer.
I also recommend you use some type of sealant around the keypad on the USC. It will make it last much longer.
Saw Dr.
Junk Collector
If that does not work, replace the main nozzle. They are not terribly expensive, and it'll very likely fix your issue. I had a 660 carb do that a while back. Owner flipped for a new carb (his decision, not mine) instead of replacing the nozzle. The "junk" carb is now in box-o-660 #2 waiting for me to quit fiddling with things like newborns and work, and get 'er going.
I have 2, 81 drive link Windsor 3/8 50ga full chisel chains. 1 looks as it hit a nail and damaged a few or more teeth. Looks as it was pretty new when it happened so there should be plenty left after a good sharpening and evening of the cutters. The #2 chain is about 65% probably needs touched up and soaked in lube as it rusted a few places. Free , if someone is willing to pay shipping.
Looking for somebody with a 028 parts saw...
Bought one on the bay and it was a basketcase with some potential.
I am in need of:
carb, Air filter cover, oiler gear, recoil parts, clutch side parts, clutch, gas and oil caps, and a good tank/handle,
(if some one is willing to part with one.. I have one, but its cracked.. Im going to attempt to weld it back together.)
parts need not be pretty. It will be a work/firewood saw.
Bought one on the bay and it was a basketcase with some potential.
I am in need of:
carb, Air filter cover, oiler gear, recoil parts, clutch side parts, clutch, gas and oil caps, and a good tank/handle,
(if some one is willing to part with one.. I have one, but its cracked.. Im going to attempt to weld it back together.)
parts need not be pretty. It will be a work/firewood saw.
Poulan Pro 655BP.
Looking for a legible manufacturer's/builder tag for the bottom of my Poulan Whatzit.
This thing is bereft of any identification except for the manual oil pump or peering in the exhaust port.
We have used clutch cover nuts, etc..................................................................
Carl.
Looking for a legible manufacturer's/builder tag for the bottom of my Poulan Whatzit.
This thing is bereft of any identification except for the manual oil pump or peering in the exhaust port.
We have used clutch cover nuts, etc..................................................................
Carl.
Warped5
WingNut
Anybody using the word 'bereft' (correctly too!) deserves a rep shot! I'm outta bullets tho ..
Carl, Joe Salva from Sugar Creek Supply has some adornments for your saw over on the House of Homelite site ...
Anybody using the word 'bereft' (correctly too!) deserves a rep shot! I'm outta bullets tho ..
Carl, Joe Salva from Sugar Creek Supply has some adornments for your saw over on the House of Homelite site ...
Yup. :msp_thumbup:
But, seeing as how the saw lost his decals, I'm looking to rivet or screw on a metal tag.
Sugar creek is about 60 mi. south of River City. Need to arrange a road trip.
Anybody using the word 'bereft' (correctly too!) deserves a rep shot! I'm outta bullets tho ..
Carl, Joe Salva from Sugar Creek Supply has some adornments for your saw over on the House of Homelite site ...
'Bereft' rep shot delivered.:msp_wink:
Last edited:
Carl, Blondie will be wore out from that road trip. It's a lot farther then you think. Maybe you can stop by here for a visit and some rest on your way out to the correct Sugar Creek .
Carl, Blondie will be wore out from that road trip. It's a lot farther then you think. Maybe you can stop by here for a visit and some rest on your way out to the correct Sugar Creek .
Must be another Sugar Creek besides the one near Kansas City?
Joe's address is Sugar Creek, Mo. 64054. (Unless he moved)
I can drop Blondie off at the Ameristar Casino to play the penny slots and then continue on. :msp_wink:
I always tell her that chainsaws are a lot cheaper entertainment.
Must be another Sugar Creek besides the one near Kansas City?
Joe's address is Sugar Creek, Mo. 64054. (Unless he moved)
I can drop Blondie off at the Ameristar Casino to play the penny slots and then continue on. :msp_wink:
I always tell her that chainsaws are a lot cheaper entertainment.
I have tried to get hold of him , emails . Never have yet ?
Wanting to trade for a 020T or 200T , needing work is better but not necessary . Have several saws to trade ! Also have a few green bills to add to the pot if need be .
PM me with ideas ?
PM me with ideas ?
009?
c_silva88
ArboristSite Operative
im looking for a fully adjustable carb for stihl 025 (WT-215) and a top cover for a husqvarna 61 i have a stihl 038 magnum crank case and plastics and other saw parts to trade
Gearhead1
ArboristSite Operative
Is that the direct descendant of the Pioneer Farmsaw? It looks very similar to it, from what I see.
Looking for a legible manufacturer's/builder tag for the bottom of my Poulan Whatzit.
This thing is bereft of any identification except for the manual oil pump or peering in the exhaust port.
We have used clutch cover nuts, etc..................................................................
Carl.
