Swap meet...

[nmurph]

I'm looking for a PTO side crankcase for an 064. I need a spike for the same side as well...got cash or maybe some 346-family parts (no cylinders or crankcases).

TIA,
Neal

Bump!!!! Someone has to have one??? I would buy both sides, but I plan to replace he bearings and really only need the PTO side.

 

[Jacob J.]

Bump!!!! Someone has to have one??? I would buy both sides, but I plan to replace he bearings and really only need the PTO side.

You know as well as anyone about the difficulty of mixing and matching Stihl case halves...

 

[Duke Thieroff]

Anyone interested in some NOS Drive sprockets?

I'll give the part numbers, as I don't have the lookups for what they fit

Oregon
21942 (Mac?)

Herr
B22A-K8
N116-A7 3/8 7

COMET
D205N407 (PIONEER?)
D207N-407 (PIONEER?)
D179B-437 (MAC?)
D116N-378 (MAC) Looks like 3/8-8T
D206N-437 (PIONEER) 7/16 pitch? 8T Looks very slightly used.

Norman Prince Associates
N207-A7 (PIONEER?) I have 2 of these
N205-A8 (PIONEER?)

Pioneer Branded NOS
472230 on the bearing, 298 on drum, looks like .325-8


Chris

Rumple-bump-skin

 

[Duke Thieroff]

Anyone interested in some NOS Drive sprockets?

I'll give the part numbers, as I don't have the lookups for what they fit

Oregon
21942 (Mac?)

Herr
B22A-K8
N116-A7 3/8 7

COMET
D205N407 (PIONEER?)
D207N-407 (PIONEER?)
D179B-437 (MAC?)
D116N-378 (MAC) Looks like 3/8-8T
D206N-437 (PIONEER) 7/16 pitch? 8T Looks very slightly used.

Norman Prince Associates
N207-A7 (PIONEER?) I have 2 of these
N205-A8 (PIONEER?)

Pioneer Branded NOS
472230 on the bearing, 298 on drum, looks like .325-8


Chris

Rumple-bump-skin

 

[nmurph]

You know as well as anyone about the difficulty of mixing and matching Stihl case halves...

I do remember that being mentioned.

 

[tbone75]

200T / 020T parts needed !!

Need a top handle and brake handle !

Got stuff to trade or paper stuff !

 

[Tractorsaw1]

Homelite super xl automatic - I'm looking for a falling dawg for it. It was a garage sell leftover that still has life in it, I have an older blue one for parts that someone probably dropped on the concrete & broke the case where the handle hooks up if anyone needs some parts.

 

[lumberjackchef]

Here are a few I got in on trade last week make me an offer or let me know what ya got available for trade.
1074 I think no compression has spark
super comango auto I think but haven't been able to confirm that yet. The p/c looks good. Not sure if it will fire.
poulan 2800 fires good crank and case tanks seem good too.

Sent from my LGL55C using Tapatalk 2

 

[nmurph]

Bump!!!! Someone has to have one??? I would buy both sides, but I plan to replace he bearings and really only need the PTO side.

I'm taken care of!!

Thanks.

 

[nmurph]

Bump!!!! Someone has to have one??? I would buy both sides, but I plan to replace he bearings and really only need the PTO side.

I'm taken care of!!

Thanks.

 

[Wagnerwerks]

I have what I think is a nos with tag full wrap for a 2100. I bought it with a bunch of other parts for 285-2100 saws.

I'd like to trade it for a full wrap for my 365. Let me know what you have and if you want pics.

 

[sefh3]

Hey guys I'm in need of some help. I have a Bolens 1468 tractor with a snow blower on the front.
I know this is not changesaw related but I have parts to trade if someone has one of these available. The PTO shaft wore out and destroyed itself. Does any have one laying around or know where I can find one? Here is what it looks like. I need the pulley also.

 

[Tractorsaw1]

I'm fixed up on the homelite spike

Still looking for poulan 8500 starter side case - would consider entire part saw

Poulan 4200 THRU 8500 would work, would prefer the ribbed front case, but beggers can't
be choosers

 

[Jimmy in NC]

Hey guys I'm in need of some help. I have a Bolens 1468 tractor with a snow blower on the front.
I know this is not changesaw related but I have parts to trade if someone has one of these available. The PTO shaft wore out and destroyed itself. Does any have one laying around or know where I can find one? Here is what it looks like. I need the pulley also.

[/URL]

Scott try My Tractor Forum dot Com. Lots of lawn and garden tractor guys over there. Looks for the Bolens section under Lawn and Garden tractors.

Sent from my MiniMac running E-85!!

 

[sefh3]

Should be chainsaw not change saw. I musta screwed that up good and auto correct got me.

 

[kc4sfe]

Still looking for 076 parts - need felling spikes and chain catcher, sprocket cover, chainbrake parts and handle, muffler, muffler cover.

 

[blueberrymuzik]

If you dont find it anywhere else, contact these folks-

Haralds Small Engine
5214 Jasmine Rd
Billings, MO 65610
(417) 743-2491

They run a salvage yard of lawn & garden. It covers about 3 or 4 acres. They will usually have what you need, but they are a little pricey.

Hey guys I'm in need of some help. I have a Bolens 1468 tractor with a snow blower on the front.
I know this is not changesaw related but I have parts to trade if someone has one of these available. The PTO shaft wore out and destroyed itself. Does any have one laying around or know where I can find one? Here is what it looks like. I need the pulley also.

 

[paccity]

l

Speaking of 394XP parts......

I need a good OEM cylinder for one.

I'm also looking for 046/460, 660, and Blue 346XP coils.

let me check.

 

[kz1000]

I need the flywheel side case half for a 262xp and an oil pump with all the fix'ens.

 

[jockeydeuce]

I'm fixed up on the homelite spike

Still looking for poulan 8500 starter side case - would consider entire part saw

Poulan 4200 THRU 8500 would work, would prefer the ribbed front case, but beggers can't
be choosers

I should have a NOS case assembly here.....4900-7700 the same???