Swap meet...

[cbfarmall]

I have a pretty good supply of 920 parts/saws. I'll do some checking this afternoon.
Ed

Cool. Thanks. Seems the later stuff is easier to find than the early models.

Chris B.

 

[moody]

Any of you guys have any complete crank case's you don't need I'd be interested. Here's a list of the saws I'd be interested in but if you have something in the ballpark that I didn't list just pm me.

Stihl 044/046 026 066/660 036/360

Husqvarna 390

Dolmar 6400/7900 5100/5105

If it's a complete crank case assembly and has been broke it's not a big deal. Just needs to have a crank and rolls doesn't have to be silky smooth. PM me and we can talk about cash or trade

 

[psuiewalsh]

Still looking for a flat top 066 cylinder cover.

Bumpo. Anyone have a spare stihl 460 cylinder or 066 flat top cylinder cover?

 

[moody]

Bumpo. Anyone have a spare stihl 460 cylinder or 066 flat top cylinder cover?

I have a 044 12 mm cylinder that has a very small flake in the plating. It has a cut squish and base.

 

[Bellringer]

If any one has an 056 clutch cover with chain brake for sale could they contact me

 

[Jacob J.]

I have a 044 12 mm cylinder that has a very small flake in the plating. It has a cut squish and base.

I could go for that.

 

[psuiewalsh]

I have a 044 12 mm cylinder that has a very small flake in the plating. It has a cut squish and base.

Conv started.

 

[Stihl Livin]

Anyone have a 461 3/4 wrap handle they would be willing to swap for my half wrap plus cash.

 

[moody]

I could go for that.

Shoot me a pm. And if I can't help him out we can figure something out

 

[Arrowhead]

Looking a rubber chip deflector and the little grommet that fits underneath the clutch cover for a Jonsered 920. This is for the early 910 style cover, not the later more common type. They are different parts, at least with regard to the deflector.

Many thanks, Chris B.

Chris, is this what you are looking for?

 

[cbfarmall]

Chris, is this what you are looking for?

A valiant effort Ed, but not quite. The little grommet is correct, but the deflector is the later common type. It won't fit in my cover. I know one of my 910s has the right part for comparison. Jonsered/s changed the clutch cover shortly after the beginning of 920 production.

If you have 910 IPLs, look at the clutch cover drawing and you'll see.

Be that as it may, that's still an envious stash of 920 covers.

Thanks, Chris B.

 

[cbfarmall]

Ed, this is the style cover I'm dealing with. You can see the deflector attaches differently.

http://www.ebay.com/itm/Jonsered-91...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

 

[Arrowhead]

If you want the little grommet, pm me your address and I'll pop it in the mail tomorrow.
I'll keep my eyes open for the style deflector you need.

 

[cbfarmall]

If you want the little grommet, pm me your address and I'll pop it in the mail tomorrow.
I'll keep my eyes open for the style deflector you need.

That little old thing is hardly worth the trouble by itself. Check your PMs.

Chris B.

 

[shawn022]

Still looking for a flat top 066 cylinder cover.

How pretty you need it to be? I think I have a couple for the flat top but would need to dig them out to know for sure.

 

[shawn022]

Chris, is this what you are looking for?

Any chance you would let one of the brake handles go, and a metal recoil assembly if you got one?

 

[psuiewalsh]

How pretty you need it to be? I think I have a couple for the flat top but would need to dig them out to know for sure.

If it is whole that should be fine.

 

[Weesa20]

Looking for the flywheel side crankcase for stihl ms260...mine broke where the AV mount is under the oil fill hole. Are there other saws that share the crankcase....280 maybe? Tried to get one from Jack's but they can't look up stihl parts...anyone have a part number?

Thanks for any help.

 

[Wagnerwerks]

It won't be a 280....

 

[Duke Thieroff]

It won't be a 280....

024/026 with a screw cap, MS 260 with a flippy cap.