Swap meet...

[Wildman1024]

Homelite XP1020 With Auto Oiler

Thinking about letting this setup go. I have used it a few times and don't really wanna mess it up. It's also a hastle for me cause i do not use it all the time then have to reprime it before I use it. I also like to use all my saws and not let them sit around and I wont use that saw w/o the oiler. I also really want a 1100/1130g for my collection.

I have just over $800 in the setup you see here with the bar. I would really like to keep that bar but if you have 2 saws to trade I can throw in a few other bars including a 36" sprocket nose.

I may throw in my 925 for the right deal

Here is what I am looking for:
Homelite 1100/1130g
Mac SP125
Dolmar 166
Dolmar 5100s (this would be in addition to one of the other saws to get some bars/chains)

I'm sure there are a few others I cannot think of right now so let me know what you have to offer even if it isnt on my list.

 

[oscar4883]

I have an 075 that I may be willing to part with. Needs a going over but is in pretty good shape. Starts and runs but will smoke and die. Hangs from the pull cord. Piston looks good intake side. I haven't been motivated to work on it. I have all new av mounts and gaskets. 18 in. bar and chain in .404. Have a new decomp valve as well as the parts to upgrade the ignition. All Stihl parts. Looking for 70cc project saws. If you need pics or have more questions shoot me a pm. Trades only please.

 

[hoss]

Well the Alpina 120 is taken care of now, but I would still be willing to trade this real nice 750 for a good runnin West Bend 820 powered saw or a Stihl Contra S or GS.

Bump. Also lookin to trade parts or cash for a Stihl 038 full wrap handle and/or an air filter for a husky 65.

 

[backwoods12]

you dont happen to have 026 piston

or piston and cylinder,

 

[little possum]

I think I have the 670 top but need the 820/920 style top. Can we trade? Mike

Sorry Mike, I dont have a 820/920 top. The 670 is the only Jred Ive seen around these parts

 

[dgarrett]

Stihl S10

I need a clutch and drum for a stihl S10. Also need a top cover for a 288 husky. Have lots of stihl parts for trade or $. thanks dgarrett

 

[biggenius29]

I need a clutch and drum for a stihl S10. Also need a top cover for a 288 husky. Have lots of stihl parts for trade or $. thanks dgarrett

Got a flywheel for a 066?

 

[Arrowhead]

Im tired of getting zapped!! I need an 015 spark plug boot. I tried a standard 90 degree boot, it won't work the plug wire is too short. The 015 is more like a V.

bump....

 

[surfincr]

looking for an 045 4 spike felling spike

 

[bowtechmadman]

Needing some parts for a 290 Stihl that was run over by a backhoe. Couldn't pass it up for 50 bucks. Looking for brake handle, top handle, top cover (not imperative cosmetic purposes), clutch cover. Green to trade.

 

[sefh3]

Anyone have an interest in a Poulan 306?? Needs wrap handle and carb rebuilt. May need some work where the reed plate attaches to carb. The bolt is stripped. Looks like an easy fix.

 

[Jacob J.]

I've got 9/16" pitch chain if anyone needs any. It's McCulloch branded chipper, standard sequence, 063" gauge.

 

[tomdcoker]

I've got 9/16" pitch chain if anyone needs any. It's McCulloch branded chipper, standard sequence, 063" gauge.

How much do you have and what do you want for the chain. I think I need some for a saw. I will have to check. Thanks Tom

 

[rbmopar]

I've got 9/16" pitch chain if anyone needs any. It's McCulloch branded chipper, standard sequence, 063" gauge.

Hi Jacob. I really need a 56dl loop for my Mall 2mg. let me know what it is worth to you. Thanks, Randy.

 

[Jacob J.]

How much do you have and what do you want for the chain. I think I need some for a saw. I will have to check. Thanks Tom

Hi Jacob. I really need a 56dl loop for my Mall 2mg. let me know what it is worth to you. Thanks, Randy.

Get me a drive link count on a loop and I'll see what I can do. There's about 40 feet left on this roll and it's going fast.

 

[logging22]

Just wanted to say a quick thanks to all the members that helped me with the 034 build. Thing runs great and my buddy says thanks as well. You guys rule.

 

[jimbo1490]

or piston and cylinder,

If anyone needs an 026 P & C I've got one that's missing a few fins, but pretty where it counts

I'll need some brake bands and a couple of oil pumps, a top handle and brake handle for 028's.

Jimbo

 

[SawGarage]

AND.... I KNOW better...

Husky 371... a 362/365/372 will fit

Need a Handle
Filter cover for HD filter
Brake part...plastic piece that connects the hand guard to the spring assy... (this WAS the only thing wrong over the phone...)


Bought a 371 the other day, got a good deal(sort of..).. Only thing wrong (over the phone) was a plastic piece connecting the spring mech to the handle...

till I got home and removed the ('well-that-duck-tape-is-for....STORY) tape the guy told me ' I would take that off, I'm not sure why the guy had it on there...maybe he held the saw there or something....:monkey: REALLY??!

I gave it a good tug and a twist, and said, well, it's probably cause the 'rubber' sheathing is broken, as it DID NOT feel like the handle was loose AT ALL...

Power of Duct tape:jawdrop:



Then the guy tells me he does tree service for a living... um...ok.

ran beautiful, and plastics were good (other than a good crack in the HD filter cover...


thanks for the rant time.....lol

J

 

[Pierce460]

MS460 Fuel tank

I am in need of a MS460 fuel tank. If someone has 1 layin around please PM me thanks.

 

[MS460WOODCHUCK]

I am in need of a few parts for a Jonsered 49SP. A piston, ring, air filter, air filter cover and a on and off switch.

Also have a Jonsered 520SP to get rid of that needs a few parts. Starts with a shot of fuel and then dies. Trade or $$ PM me if interested.