Swap meet...

[Mastermind]

Yup I do!

Bring On Another Thousand!

A hole in the water you throw money into.

But I'm good at doing things on the cheap!

And it helps to know people. If anybody cares to see what I'm doing you can see it here. http://forums.iboats.com/showthread.php?t=441929

You'll probably have to sign up to see the pictures though.

I just read your thread Will. What a job. I have a 1972 Classic Motorboat with a Chevy in-line six. I've had it for at least 15 - 18 years. It's been in my barn now for around 6 years but still runs great. It's a mercruiser driveline and has been a blast to own. It only needs seats and interior work. The floor and engine stringers have been replaced with treated marine wood and reglassed. I just sort of lost interest in boating, seeing your restoration could send me back to it.

 

[Eccentric]

Wait till you see my new score I pick up the end of this week. You may rethink how many 30 packs your are sending me. I dont drink Bud Light either. I'm gonna need a few cases of yuengling porter

Wow Rick. You're on fire. Have you started a thread for your latest score yet? Looks like I need to start saving for the "Rick's Beer/Saw-Trade Fund" (RBSTF). I'm glad to see you're a porter fan. I've had Yuengling and liked it quite a bit. I'm a homebrewer, and I enjoy grabbing single bottles from the vararious 'real beer' isles at BevMo to see what style I wanna emulate next. I'm also spoiled because we have many many excelent brewpubs in the area. If you ever make it to the left coast I'll take you to a few.

When I was a drinker we would only drink PBR when the mudholes dried completely up.

I like PBR. It's about the only domestic pilsner that I can drink anymore. Had a few with RandyMac last weekend as a matter of fact.

 

[Wildman1024]

Wow Rick. You're on fire. Have you started a thread for your latest score yet? Looks like I need to start saving for the "Rick's Beer/Saw-Trade Fund" (RBSTF). I'm glad to see you're a porter fan. I've had Yuengling and liked it quite a bit. I'm a homebrewer, and I enjoy grabbing single bottles from the vararious 'real beer' isles at BevMo to see what style I wanna emulate next. I'm also spoiled because we have many many excelent brewpubs in the area. If you ever make it to the left coast I'll take you to a few.



I like PBR. It's about the only domestic pilsner that I can drink anymore. Had a few with RandyMac last weekend as a matter of fact.

no new thread yet. Don't even wanna mention it till its in my hand ya know. it's paid for though!

 

[Eccentric]

no new thread yet. Don't even wanna mention it till its in my hand ya know. it's paid for though!

That's understandable.

 

[Kwdog75]

Yup I do!

Bring On Another Thousand!

A hole in the water you throw money into.

But I'm good at doing things on the cheap!

And it helps to know people. If anybody cares to see what I'm doing you can see it here. http://forums.iboats.com/showthread.php?t=441929

You'll probably have to sign up to see the pictures though.

I need to do the same thing to my boat Will, i have a 1978 Angler V-19 that needs help. Cool project boat by the way. Feel free to send the 115 hp motor my way and i'll send you a 1978 Johnson 85hp v4! hahaha

 

[oscar4883]

John, I have a NOS 041 recoil, if your fixin up a REALLY nice one ...[/QUOTE]

I think I may have it covered but thanks for the offer. THis one is far from nice too. LOL

 

[parrisw]

I just read your thread Will. What a job. I have a 1972 Classic Motorboat with a Chevy in-line six. I've had it for at least 15 - 18 years. It's been in my barn now for around 6 years but still runs great. It's a mercruiser driveline and has been a blast to own. It only needs seats and interior work. The floor and engine stringers have been replaced with treated marine wood and reglassed. I just sort of lost interest in boating, seeing your restoration could send me back to it.

I've always-ed loved boating, this boat only see's the lake, kids love tubing, and well so do I!

Get that boat out!

I need to do the same thing to my boat Will, i have a 1978 Angler V-19 that needs help. Cool project boat by the way. Feel free to send the 115 hp motor my way and i'll send you a 1978 Johnson 85hp v4! hahaha

Cool get that boat fixed! And I think I'll hang on to this 115!

 

[SawGarage]

John, I have a NOS 041 recoil, if your fixin up a REALLY nice one ...

I think I may have it covered but thanks for the offer. THis one is far from nice too. LOL[/QUOTE]

Cool man....still owe ya one

OH! the rep.

 

[HittinSteel]

Yup I do!

Bring On Another Thousand!

A hole in the water you throw money into.

But I'm good at doing things on the cheap!

And it helps to know people. If anybody cares to see what I'm doing you can see it here. http://forums.iboats.com/showthread.php?t=441929

You'll probably have to sign up to see the pictures though.

Nice project you have going there. I'm a member on that site too. Good place with knowledgable guys just like here. I'll get in line on that 115 if you ever get rid of it, love those older Johnson and that one looks clean!...... It would do wonders for my 24' Lowe Pontoon!

 

[parrisw]

Nice project you have going there. I'm a member on that site too. Good place with knowledgable guys just like here. I'll get in line on that 115 if you ever get rid of it, love those older Johnson and that one looks clean!...... It would do wonders for my 24' Lowe Pontoon!

Thanks! Ya I lucked out getting that outboard, its all original for 1984 and it looks brand new!! Some old guy owned it and never used it.

 

[Saw Dr.]

I must be flippin' nutz. I have a pair of 009's and a pair of 011's here for rehab. I thought if I ignored them long enough, they'd go away. No such luck. Last time at the dealer he hands me a complete 009 with a bad coil, and then HANDS ME THE NOS COIL IN THE BOX!!!! Guy bought the coil, and couldn't figure out how to put it in. Dealer didn't want to mess with it, so he saved it for me. Thanks......

So I need a points box cover for a 009, and at least one 011 carb.

Alternately, a sledgehammer would work

Plenty to trade

 

[SawGarage]

I must be flippin' nutz. I have a pair of 009's and a pair of 011's here for rehab. I thought if I ignored them long enough, they'd go away. No such luck. Last time at the dealer he hands me a complete 009 with a bad coil, and then HANDS ME THE NOS COIL IN THE BOX!!!! Guy bought the coil, and couldn't figure out how to put it in. Dealer didn't want to mess with it, so he saved it for me. Thanks......

So I need a points box cover for a 009, and at least one 011 carb.

Alternately, a sledgehammer would work

Plenty to trade

sledgehammer...lol

 

[chainsawwhisperer]

I must be flippin' nutz. I have a pair of 009's and a pair of 011's here for rehab. I thought if I ignored them long enough, they'd go away. No such luck. Last time at the dealer he hands me a complete 009 with a bad coil, and then HANDS ME THE NOS COIL IN THE BOX!!!! Guy bought the coil, and couldn't figure out how to put it in. Dealer didn't want to mess with it, so he saved it for me. Thanks......

So I need a points box cover for a 009, and at least one 011 carb.

Alternately, a sledgehammer would work

Plenty to trade

Lately that's the only kind of crap that my local dealer has been giving me to fix. In the last week - Mini Mac, Dayton & Homelite Super 2 :bang:

 

[roncoinc]

I must be flippin' nutz. I have a pair of 009's and a pair of 011's here for rehab. I thought if I ignored them long enough, they'd go away. No such luck. Last time at the dealer he hands me a complete 009 with a bad coil, and then HANDS ME THE NOS COIL IN THE BOX!!!! Guy bought the coil, and couldn't figure out how to put it in. Dealer didn't want to mess with it, so he saved it for me. Thanks......

So I need a points box cover for a 009, and at least one 011 carb.

Alternately, a sledgehammer would work

Plenty to trade

Had a couple 011 awhile ago,,, think i kept the carbs..
save me the trouble,,post make and model ?
then i can look.

 

[Mastermind]

Had a couple 011 awhile ago,,, think i kept the carbs..
save me the trouble,,post make and model ?
then i can look.

How's it goin Ron???

 

[Kwdog75]

I must be flippin' nutz. I have a pair of 009's and a pair of 011's here for rehab. I thought if I ignored them long enough, they'd go away. No such luck. Last time at the dealer he hands me a complete 009 with a bad coil, and then HANDS ME THE NOS COIL IN THE BOX!!!! Guy bought the coil, and couldn't figure out how to put it in. Dealer didn't want to mess with it, so he saved it for me. Thanks......

So I need a points box cover for a 009, and at least one 011 carb.

Alternately, a sledgehammer would work

Plenty to trade

I have a pretty complete 009 you could have for parts, motor is seized, get the parts you need off it and use the rest for a boat anchor.

 

[Scandy14]

Looking for a recoil for a Husqvarna 350.

 

[brian660]

i`m willing to trade labor or mechanic work for anything that might peak my interest, i`ve grown up around and spent most of my life working on cars and trucks, i`ve got ford dealership experience and training when I was younger as well as lots of experience with cummins, powerstroke and duramax engines as well industrial and OTR diesel engines.

I can work at my home or come to you and since I live in the middle of nowhere and have no job my schedule is WIDE OPEN :greenchainsaw:

 

[MS460WOODCHUCK]

Got a few saw's to part with. Homelite SXL-AO, Homelite 360 and a Jonsered 621. All of these saw's run. Looking to trade for? or possibly sell.

PM me if interested.

 

[roncoinc]

How's it goin Ron???

Hey Randy !!..
it's goin !!
buried in saws and such,,try to fight my way clear and losing !!.
Durn saw garage wont come up and help me clean out !!
need a muffler and clutch cover for a husky 350..
..
how bout you ??
Ron..