Swap meet...

[Mastermind]

Hey Randy !!..
it's goin !!
buried in saws and such,,try to fight my way clear and losing !!.
Durn saw garage wont come up and help me clean out !!
need a muffler and clutch cover for a husky 350..
..
how bout you ??
Ron..

I'm buried in wood right now we've cut and split 6 cord in the last week, that's too much for a lazy fat guy like me. :spam:

 

[sefh3]

I'm looking for some parts for a 051AV. I need a muffler, AV bushings (handle), and a starter cup. I have parts to trade for.

 

[Modifiedmark]

Husky coil

I need a coil for a Husky, 51, 55, 61, 254, 261, 262, 268, 272 and others including Jonsered will work.

Let me know what you need.

I still have that 031 with alot of good parts, including a good P/C.

 

[Jacob J.]

I need a coil for a Husky, 51, 55, 61, 254, 261, 262, 268, 272 and others including Jonsered will work.

Let me know what you need.

I still have that 031 with alot of good parts, including a good P/C.

Mark-

I sent you a Husky coil from a 55, are you needing another?

 

[Modifiedmark]

Mark-

I sent you a Husky coil from a 55, are you needing another?

Cool, but just thought about a spare, so its not needed too bad.

 

[Saw Dr.]

Hey Mark, I have a stock 505 coil that bolts right up..... Will that help ya out?

 

[jockeydeuce]

Cool, but just thought about a spare, so its not needed too bad.

Mark......PM me your address and I'll send you a coil......I may need some 031 parts, but won't know exactly what until next week.

Rob

 

[sefh3]

Hey Mark, I have a stock 505 coil that bolts right up..... Will that help ya out?

Tim you still needing a carb for that 011?

Mark, any thing else you need to trade for that 031? I need a cylinder for one?

 

[Modifiedmark]

Hey Mark, I have a stock 505 coil that bolts right up..... Will that help ya out?

Thanks but no thanks, I'm betting that 505 coil is rev limited like the 475's were. What color is that one on the 505?

Mark......PM me your address and I'll send you a coil......I may need some 031 parts, but won't know exactly what until next week.

Rob

Will do Rob.

 

[Modifiedmark]

Tim you still needing a carb for that 011?

Mark, any thing else you need to trade for that 031? I need a cylinder for one?

If Rob don't need the cyl its yours no problem.

I thought you were going to let me know about it before now...

 

[SawGarage]

I need a coil for a Husky, 51, 55, 61, 254, 261, 262, 268, 272 and others including Jonsered will work.

Let me know what you need.

I still have that 031 with alot of good parts, including a good P/C.

Mark,

would a 257 work??

J

 

[Bowtie]

Jonsered 2095

Im looking for a throttle cable, cylinder cover, clutch cover, flywheel cover(the inner portion, not the starter), outer spike, chainbrake setup all for a Jonsered 2095. I have Misc Stihl stuff and a few Husky parts and cash to trade.

CRAP, need an intake too now!!

 

[sefh3]

If Rob don't need the cyl its yours no problem.

I thought you were going to let me know about it before now...

I just went and look at the saw last night. Owner was busy until now.

 

[tlandrum]

I need a coil for a Husky, 51, 55, 61, 254, 261, 262, 268, 272 and others including Jonsered will work.

Let me know what you need.

I still have that 031 with alot of good parts, including a good P/C.

i have a coil on a 51 or a 55 if you still need one pm me

 

[Duke Thieroff]

I have various parts of an 031 AV, pictures show what I have. I may have a couple more things not pictured. Motor is locked up. But there are many salvageable parts. Will trade for anything for a McCulloch S44, Stihl 041AV or Jonsered 2149T. Although I don't have any refs on this forum I do have a ton on another forum and 27 on eBay, all positive.


PM me, if you are interested.


CT

 

[tmessenger]

WTB: Sthil 018 p/c

Looking for a good piston cylinder for an 018 / MS180

Tim

 

[stderr]

Looking for a Husqvarna 35 chain brake handle

The chain brake works, but the plastic part of the handle is broken off. If anybody has one, please pm me.

A rewind spring would be nice too. The one in the saw is pretty tired. It seems to have lost most of its temper. Can a rewind spring be re-tempered?

Thanks.

 

[oscar4883]

I have an MS360 with an 036 case I would like to trade off. Has a full wrap from Madsens and dual dawgs. The piston I put in it was used and even with new rings it is only hitting about 130lbs. comp. so it will need a piston. Cylinder looks good though. Was going to put a new slug in it but realize that I never used any of the 60cc saws I have had that much. Looking to trade for a 50ish cc Husky or something like that. 350, etc. PM me if interested and I can send pics.

 

[SawGarage]

the chain brake works, but the plastic part of the handle is broken off. If anybody has one, please pm me.

A rewind spring would be nice too. The one in the saw is pretty tired. It seems to have lost most of its temper. Can a rewind spring be re-tempered?

Thanks.

pm sent

i have an ms360 with an 036 case i would like to trade off. Has a full wrap from madsens and dual dawgs. The piston i put in it was used and even with new rings it is only hitting about 130lbs. Comp. So it will need a piston. Cylinder looks good though. Was going to put a new slug in it but realize that i never used any of the 60cc saws i have had that much. Looking to trade for a 50ish cc husky or something like that. 350, etc. Pm me if interested and i can send pics.

pm sent

 

[Brushwacker]

I have an MS360 with an 036 case I would like to trade off. Has a full wrap from Madsens and dual dawgs. The piston I put in it was used and even with new rings it is only hitting about 130lbs. comp. so it will need a piston. Cylinder looks good though. Was going to put a new slug in it but realize that I never used any of the 60cc saws I have had that much. Looking to trade for a 50ish cc Husky or something like that. 350, etc. PM me if interested and I can send pics.

If you haven't worked out a trade , I would welcome an offer with the 360 for the New 152 Efco I have on trading post . If that interest you let me know sap and send me some pics. I was aiming to list it on ebay tonight but if your interested it would be no problem to delay listing it a week. later, John