Swap meet...

[Eccentric]

I have the brake handle and the brake band that goes around the clutch, MIGHT have the spring.

Cool. I have a band already. Might as well take one as a spare though. If you can find the spring that'd be even better. What would you need for 'em (with shipping to 95472)?

 

[Kwdog75]

well it depends on how old your saw is but i think parts from these saws should work on the same kind saws but i'm not for sure though.but i'll see how it will cost to ship them to canada.and get back to you on the trade

Don't bother, my neighbour showed up with a few beers and took the Husky off off my hands, he's got a good case with a bad motor, couldn't of worked out better for him.

 

[Saw Dr.]

I need a nice set of 041AV cases, and a muffler for the same.

Local small engine shop asked me to find him a top cover for a Poulan 3500. It is the one that the retaining screws go in from the sides. Not sure what others will interchange, if any. Any leads or suggestions would be great. This guy does favors for me on occasion.

 

[sefh3]

I'll check tonight. I think I have one if not both cases for a 041. I'll let you know.

 

[dh1984]

Don't bother, my neighbour showed up with a few beers and took the Husky off off my hands, he's got a good case with a bad motor, couldn't of worked out better for him.

lol i heard that sounds like a good deal there for him

 

[Kwdog75]

lol i heard that sounds like a good deal there for him

Was a better deal for me... got a few beer and a few bucks!

 

[Work Saw Collector]

I need a nice set of 041AV cases, and a muffler for the same.

Local small engine shop asked me to find him a top cover for a Poulan 3500. It is the one that the retaining screws go in from the sides. Not sure what others will interchange, if any. Any leads or suggestions would be great. This guy does favors for me on occasion.

I'll check tonight. I think I have one if not both cases for a 041. I'll let you know.

Tim if Scott don't have the 041 parts I do. This is the way I got it in a box and it's still that way.

<a href="http://www.flickr.com/photos/supercabs78/5227111539/" title="For Tim (Saw DR) by supercabs78, on Flickr"><img src="http://farm6.static.flickr.com/5041/5227111539_32e86e06f0.jpg" width="500" height="375" alt="For Tim (Saw DR)" /></a>

 

[tomdcoker]

Would the parts off those work on my Mini Mac? If so i have a Husky 36 that needs a new case if you would want that.

I think I have a case for a Husky 36. Tom P S I should have read further.

 

[67L36Driver]

Mac 10-10 clutch cover & bar plates.

Mac 10-10 clutch cover and bar plates needed. Can even use the style that has chain brake and muffler guard built in. I can cut off a damaged muffler guard and just ignore the chain brake 'stuff'.

Have a few Washingtons, Lincolns, and maybe even a Jackson to trade. A Craftsman (below) that needs a new home.

Lets say a 50-60 mile radius of St. Joseph. I'll be there slowly in my Corvair.

Got my PM 10-10S back up running this morning and am dying to try my oldie mouldie 10-10A. (It makes lots more noise and my friend has a dead elm blowdown.)

 

[roncoinc]

I need a air filter,top cover and recoil but first i would like to get it running..
for some reason somebody took off the transfer cover !! cant start it without that
if you have one for parts or just the recoil side transfer cover i could see if it was worth doing something with.
heres a pic of the missing cover.

have stuff,no stihl,gave it all away

Nobody got one of these saws ??
even the bay dont,not listed in IPL either

 

[bigbadbob]

Looking for Jred 621 top cover.
Husky 61 complete chainbrake/cover assy.

 

[MS460WOODCHUCK]

Cool. I have a band already. Might as well take one as a spare though. If you can find the spring that'd be even better. What would you need for 'em (with shipping to 95472)?

PM sent.

 

[MS460WOODCHUCK]

Here are some saws that I'm looking to sell or trade. The 245 is already gone.
The stihl 012 runs great with a 14'' bar and chain.
The newer poulan is a 42cc WILDTHING with a green clutch cover and starter cover because I won't be caught dead running a saw with PURPLE on it. It has a good 16'' bar on it, runs and oils great. The saw pulls 150 on the compression gauge.
The 306A will fire but won't idle right or cut any wood because the P/C is scored pretty good, has good parts on it if anyone needs a parts saw.
The top handle poulan also has a trashed P/C and is only good for parts. It is also missing the rope.
PM me if your interested in any of this.

<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&amp;current=2010009.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/2010009.jpg" border="0" alt="Photobucket"></a>

 

[stubnail67]

counter vibe

Here are some saws that I'm looking to sell or trade. The 245 is already gone.
The stihl 012 runs great with a 14'' bar and chain.
The newer poulan is a 42cc WILDTHING with a green clutch cover and starter cover because I won't be caught dead running a saw with PURPLE on it. It has a good 16'' bar on it, runs and oils great. The saw pulls 150 on the compression gauge.
The 306A will fire but won't idle right or cut any wood because the P/C is scored pretty good, has good parts on it if anyone needs a parts saw.
The top handle poulan also has a trashed P/C and is only good for parts. It is also missing the rope.
PM me if your interested in any of this.

<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&amp;current=2010009.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/2010009.jpg" border="0" alt="Photobucket"></a>

does the counter vibe have points or is it solid state?

 

[MS460WOODCHUCK]

A list and picture of some parts to go,

Stihl 056 that ran before it went through my garage fire. The P/C went to a member here that said it was still good so here is the rest of it. Crank and rod which I think is good, handlebar and carb with linkage.
Stihl 16'' 3/8 bar that is almost new maybe 3 tanks of mix ran through my 260with this bar on the saw. Also a new clutch sprocket with no rim, a new adjustable oil pump and a air cleaner that is just about new. All of these parts are for a 260.
Power Mac6 14'' bar with letters still on it comes with a 1/4 chain that is good. Also a complete 1/4'' clutch and sprocket for a power mac 6.
10-10 brake parts that I think are spoken for.
Good 20'' oregon bar that fits poulan 306-245 and mac 10-10. Bar comes with a decent chain with about half its life left.
Poulan 5200 case with I think a good crank, rod and oil pump. The case may be good also but someone welded it back together by the top left AV mount.
306-245 parts: 245 handlebar, good complete clutch with sprocket and needle bearing, clutch cover that was new but has been on a saw that I had,couple of carbs that need rebuilt I'm sure, air filters that are still good, flywheel covers and top covers for both the 306 and 245 and a pull start assembly that is good.
A mini mill that was only used once. I have the rails for it also and I think I still have the owners manual.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&amp;current=2010012.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/2010012.jpg" border="0" alt="Photobucket"></a>
PM me if your interested in any of this.

 

[MS460WOODCHUCK]

does the counter vibe have points or is it solid state?

I think it's SS but I would have to check for sure.

 

[stubnail67]

cool

I think it's SS but I would have to check for sure.

cool if it is how much ya want for it or just the coil assembly and flywheel

 

[HittinSteel]

Need a choke control assembly for a Husky 55

 

[Walt41]

Looking for a 6401. The 380 needs rings and has no spark, The S10 has spark and compression but a gaffed up puller.

 

[jbird77]

McCulloch

I have a McCulloch timber bear saw all apart if anyone needs any parts . i hadnt ever seen one till this one