Swap meet...

[MS460WOODCHUCK]

I have a good running stihl 012 with a 14'' bar to get rid of also have a good running poulan 245A with 20 or 24'' bar to let go. Looking to sell or trade. PM me if anybody is interested.

 

[TRI955]

Need a set of thin rings for a 281xp Husky, 52mm

 

[little possum]

Need a set of thin rings for a 281xp Husky, 52mm

Are they NLA Mike?

 

[HittinSteel]

Are they NLA Mike?

I have an OEM ring, ordered from the IPL ....... not sure on the thin distinction or a set?

 

[TRI955]

Are they NLA Mike?

Yes, this is what I have been told.

Need a good flywheel for the 281 also.

 

[little possum]

I saw some thin rings in the shop, and I only have a 281 with thick rings- so Ill check

 

[Eccentric]

Still need a chainbrake lever, spring, and mounting screw/washer for a McCulloch ProMac 10-10 (or a complete chainbrake equipped clutch cover). Parts from a PM55 (and possibly a PM700 and other Macs of the time period) would work too. May also be interested in a non-chainbrake clutch cover for a LH start 10-10 instead (or until I can get the chainbrake parts). Got the saw running............now I need to sort out the clutch cover so I can put it in the wood...

 

[tmessenger]

Seeking a jug and slug for a 011. I have some stuff, and a little green paper. Thanks guys.

I have an 011 cylinder, have to check it out and see condition.

Tim

 

[Mastermind]

I have an 011 cylinder, have to check it out and see condition.

Tim

Thanks Tim. I sure appreciate it.

 

[little possum]

I could use a handle for a 2055 poulan before my friend cuts his leg off. He has been holding onto the chain brake

 

[Mastermind]

I could use a handle for a 2055 poulan before my friend cuts his leg off. He has been holding onto the chain brake

I check in a little while Zachery, but I think I have one.

 

[blsnelling]

I need the following for a Homelite 1050.

1. Muffler guard/cover
2. Choke rod
3. Clutch/bar cover

 

[Scooterbum]

A 009L is 38mm, a 009 is 36mm. I would really like to go with the 38mm stuff. But....

Johnny my son has a 009L he's getting ready to part out.Said the P&C was in good shape,I'll double check bore size.

 

[epicklein22]

what i have
2 used mahle 660 cylinders
2 used Stihl 660 intake boots
2 used mahle 064 cylinders (one is ported)
NOS Stihl 038 airfilter cover
NOS Stihl 028 muffler
NOS Stihl 076 clutch carriers
NOS Stihl 031 piston
NOS Stihl 015 piston
NOS Stihl 009 walbro wa99 carb
NOS Stihl 064 chainbrake handle (fits 3/4 wrap)

what i want.... 084 parts or $$$

What's a 084 P&C (has some hours on it) and crankcase worth to ya?

 

[stubnail67]

for trade!!!

hello i have 2 of these old homelite super 2s in fair shape id call emm poor and an original homelite saw case one i had running but the clutch blew apart the other no spak did not even mass with it got it with the case it has carb problems as well but looks better shape.. i will trade both these for one poulan 25sda 38 cc in good shape!!! i pay shipping for what i get you pay shipping for what you get let me know what ya got!!!! ps this is one will get pics of the rest tommprow!!!

 

[Mastermind]

I could use a handle for a 2055 poulan before my friend cuts his leg off. He has been holding onto the chain brake

Sorry LP, the one I have only fits on the strato models.

 

[jbird77]

looking for a coil for a 70 e . and a coil for a 285 cd husky

 

[sefh3]

I'm working on a Stihl 048 and needs some small parts for this project. I need the collar screw that holds the front handle bushing in (1117 791 6105) and also the handle bar support (1117 791 1900). Also would like a name plate if there is one that looks kinda good. Doesn't have to be new.

Also looking for a piston and rings for a 025. I'm working on a budget build as the saw is not mine.

I have parts to trade and $$. PM me if you can help. Thanks

 

[Modifiedmark]

I could use a handle for a 2055 poulan before my friend cuts his leg off. He has been holding onto the chain brake

I probably have that handle, want me to look?

 

[Mastermind]

I probably have that handle, want me to look?

I thought I did Mark, but no.