Swap meet...

[SawGarage]

Hey Jay. You're gonna have to clear some of them PMs before I can tell ya I have a half wrap for a 036.

would a half wrap off an 034 super work?

P.S... clean out your PM box SawGarage!

:bang: DOAH!!!

sorry... all clean, for a bit..

Randy, you the best!

the PP, I think?? has a bad carb? still an air leak :bang::bang: it's KILLIN ME!!


Rob, yep, that'd work too...same chassis..




J

 

[vw_motorsports]

whatcha lookin for?

see post #6153

 

[Stumpys Customs]

see post #6153

Sorry, can't help ya on those parts.

 

[rupedoggy]

ok the 25 mini and the 2.0 mini macs are all apart and the 25 needs a fuel line and the 2.0 needs a new piston and cylinder so it's just for parts.but the mini mac 30 is still togeather but needs a carb kit to run. it will run when you pour mix down the carb and it will run untill the mix runs out then dies. send pm for more info. would like to just get rid of them because i don't know much about these macs thats the reason i don't fix them

I love that last "I don't know much about these macs that's the reason I don't fix them".
My reason for not fixing them is because I do know something about them....LOL Mike

 

[stihlboy]

what i have
1 used mahle 066 cylinder
2 used Stihl 660 cylinders
2 used Stihl 660 intake boots
2 used mahle 064 cylinders (one is ported)
NOS Stihl 038 airfilter cover
NOS Stihl 028 muffler
NOS Stihl 076 clutch carriers
NOS Stihl 031 piston
NOS Stihl 015 piston
NOS Stihl 009 walbro wa99 carb
NOS Stihl 064 chainbrake handle (fits 3/4 wrap)

what i want.... 084 parts or 064 parts

bump

 

[SawGarage]

I love that last "I don't know much about these macs that's the reason I don't fix them".
My reason for not fixing them is because I do know something about them....LOL Mike

Mike...


always so cynical oke: ...

although...I MUST agree...the fact that you HAVE TO dissemble the ENTIRE saw to get to the carb is heinous.

J

 

[crane]

Nice old Mac 1-40 up for trade. Saw runs good and is original, not a restoration. Looking for same vintage Mall or Remington saw. More pics can be supplied.

Drew

 

[tlandrum]

need outer oem bar spike for a 372

 

[Steve NW WI]

looking for a piston assembly and air filter assembly for Olympyk 251 Special. can give a hint on how to find one? i've cross referenced out-of-production ipl's for the saw and even tried to reference to the current efco models, to no avail. anyone parting one out?

I have a 252 that I'm checking the coil out for another guy, I will give the P&C a lookover and compression test if it will fit your saw. It is a 44mm bore vs the 46mm on your Super, but it'll get ya up and running maybe, at 4ccs less. Shoot me a PM if you want me to check into it deeper.

EDIT: Looking on Acre's site, the 254 and 254F share the 46mm bore that your Super has, might be a better match for you if you can find one.

 

[lawncarebydesig]

Shindaiwa 575 chainsaw (great condition)

I'm looking to possibly get rid of my shindy (it's currently on cragslist and ebay). Here's what I used for the description; let me know if you're interested. Thanks.

For sale is a 4.4 HORSEPOWER Shindaiwa 575 saw w/ a 20 inch bar and chain. EVERYTHING works as it should.



It has 150+ PSI compression and starts, idles, revs...... perfectly. You can really feel the compression when starting it!



This is comperable to a Stihl 362.

I've had this for 10 years and actually spent $200+ on it a few years back on a new piston/rings/etc. I ONLY use stihl full synthetic oil mix. You should also.



You WILL NOT find a saw this nasty in a big box store.

 

[mdavlee]

need outer oem bar spike for a 372

Large or small one?

 

[lawncarebydesig]

Shindaiwa 575 chainsaw

more image(s)

 

[nmurph]

this thread is for trading parts or saws. if you are not doing either, you need to list it in the trading post. there is also a thread called "i saw it on craigslist" and you might link you listing there.

 

[Honkie]

NEED......clean 044 plastic, full wrap handle, heavy duty bar cover, set of av mounts

HAVE.....044 jug(old/no decomp) with stripped plug hole
10mm crank
10mm case halves
Tired ms260 with adjustable hi/lo carb with a smoked jug-n-slug.
Scored on exh. side, saw is currently apart in a box.

 

[tlandrum]

NEED......clean 044 plastic, full wrap handle, heavy duty bar cover, set of av mounts

HAVE.....044 jug(old/no decomp) with stripped plug hole
10mm crank
10mm case halves
Tired ms260 with adjustable hi/lo carb with a smoked jug-n-slug.
Scored on exh. side, saw is currently apart in a box.

put me in line on the tired little ms260,send me a pic and a price

 

[tlandrum]

Large or small one?

i need the one that matches the narrow inner spike that i think is factory,i guess you would call it small. it definately is not as big as the large from baileys.

 

[TrillPhil]

still needing husky 338 parts

 

[mdavlee]

i need the one that matches the narrow inner spike that i think is factory,i guess you would call it small. it definately is not as big as the large from baileys.

I'll post a picture for you so you can decide which it is. Top or bottom one. I've got an extra set of the small and an extra inner large one.

 

[tmessenger]

Looking for a spur sprocket for my Sthil 020 AV 3/8" 6 tooth # 1114 640 2001 . Have 14" and 12" 1/4" pitch bars and chains to trade or other parts or green.

 

[crane]

this thread is for trading parts or saws. if you are not doing either, you need to list it in the trading post. there is also a thread called "i saw it on craigslist" and you might link you listing there.

If this was directed to me, I was after a trade. I wanted to try here first, as there are people here that want to help, not just haggle $ and cents. If not then I apilogize. carry on

Drew