Swap meet...

[SawGarage]

Husky 55-272, etc chain brake guts, or??

Hey Guys..

odd request...

I need a couple knee-joints, screws etc for chain brakes...seems most of the 50-272 basically use the same innards (from what I have here..)

I have a couple with broken retainer springs (The piece towards the front that you can see resetting the brake, as well as the knee joint metals...

covers can be in pieces, blown apart or just the innards...


thanks!!!


Jay

 

[Mr. Bow Saw]

need:

Stihl 025 air filter cover, carb, linkage, and black throttle cover on handle, 046 tank and some other parts

Echo 670, muffler, bolts, piston

husky 262, rear A/V spring, 257 top cover, side cover, carb and throttle linkage

Poulan 335, complete air filter cover and parts that attach to the tank

Poulan 3700CV starter pulley, weird pulley, has 2 pins. Plastic is broken so pins slip. others I have are different.

pic posted of starter pulley

I have a 3700cv parts saw with that kind of pully in it.
The saw has no compression but it turns smooth.

What do you have to trade?

 

[jockeydeuce]

I have a nice 36" .404 Stihl bar for the 070-090. Got a nearly new 20" 3/8 Husqvarna bar. I also have some 066 parts to trade, good fuel tank, jug and slug, crank, coil, poly flywheel, etc... I have two good fuel tanks for a 028, a 028 super crankcase, several other parts for the 028s. A new 044 piston. Lots of other Stihl parts.

I'm needing some 046 parts and some 026 parts.

046

Top cover
Everything from the carb back for the HD air filter except the cover
Chainbrake handle
Spring covers
Other small parts, surely.

026

Top cover
Air filter
Piston
Rear part of muffler
Recoil guts

Pm me for more pics, but here's a few.

[

Randy

I'll PM you tomorrow.....I'm pretty sure I've got most of that stuff and you've got some stuff that interests me there.

 

[stihlboy]

what i have
1 used mahle 066 cylinder
2 used Stihl 660 cylinders
2 used Stihl 660 intake boots
2 used mahle 064 cylinders (one is ported)
NOS Stihl 038 airfilter cover
NOS Stihl 028 muffler
NOS Stihl 076 clutch carriers
NOS Stihl 031 piston
NOS Stihl 015 piston
NOS Stihl 009 walbro wa99 carb
NOS Stihl 064 chainbrake handle (fits 3/4 wrap)

what i want.... 084 parts or rollernose bars
or 1/2'' pitch chain

 

[HittinSteel]

Husky 55-272, etc chain brake guts, or??

Hey Guys..

odd request...

I need a couple knee-joints, screws etc for chain brakes...seems most of the 50-272 basically use the same innards (from what I have here..)

I have a couple with broken retainer springs (The piece towards the front that you can see resetting the brake, as well as the knee joint metals...

covers can be in pieces, blown apart or just the innards...


thanks!!!


Jay

Best I could do Jay is broken 61 clutch cover/brake.... the brake looks to be fully functional (it's metal though???????). Let me know if it might work.

 

[blsnelling]

I have a nice 36" .404 Stihl bar for the 070-090.

Looks like your bar has a 3/8 tip on it.

 

[dh1984]

i need a starter assembly for a poulan 3800

i have some mini mac parts and some poulan 4218av parts to trade

 

[Mastermind]

Looks like your bar has a 3/8 tip on it.

You are correct Brad. I just looked at the bar, the tip is 3/8".

 

[vw_motorsports]

I have a 3700cv parts saw with that kind of pully in it.
The saw has no compression but it turns smooth.

What do you have to trade?

what are you in need of:hmm3grin2orange:

 

[Mr. Bow Saw]

what are you in need of:hmm3grin2orange:

I need a front handle for a Homelite XP 1130.
I need an air filter for a Stihl contra, but not the screw in kind.
I need a carb kit for a Mac BP-1.
I need a Bow bar for any saw.

 

[Stihl Crazy]

260 Stihl for Efco

Looking for new or good condition Efco/Oleo-Mac/John Deere/Cub Cadet 56 or 62 cc saw.

Have a new MS 260 to trade. Started at dealer 1 month ago, never used, guy traded it with me for a new 152 Efco the same day he got it.

 

[MS460WOODCHUCK]

Looking for new or good condition Efco/Oleo-Mac/John Deere/Cub Cadet 56 or 62 cc saw.

Have a new MS 260 to trade. Started at dealer 1 month ago, never used, guy traded it with me for a new 152 Efco the same day he got it.

Wish I had a Efco/oleo-mac/John Deere/Cub Cadet 56 or 62cc saw.:hmm3grin2orange:

 

[HittinSteel]

Wish I had a Efco/oleo-mac/John Deere/Cub Cadet 56 or 62cc saw.:hmm3grin2orange:

My 260's not quite that new but still in it's very early life....... I could be open to trades. Shoot me a PM if interested.

 

[Saw Dr.]

I need:

Jonsered 621 or 70 Top end or cylinder
Husqvarna 51/55 recoil housing in good shape.
Poulan 3350/3500/3600/336/365 top cover
Winning ticket to P-62 raffle

 

[Kwdog75]

Thanks to the AS member who sent me the dual port muffler for my 044!!! I don't remember who i got it from

 

[logging22]

Looking for some Husky 2100 parts. Oiler complete P# 501558302, or parts plunger P#501558902/8802, and bushing P# 501272801. Let me know what ya want parts wise, but got a few greebacks that would work better. Thanx.

 

[schmuck.k]

Looking for some Husky 2100 parts. Oiler complete P# 501558302, or parts plunger P#501558902/8802, and bushing P# 501272801. Let me know what ya want parts wise, but got a few greebacks that would work better. Thanx.

will a 480cd oiler work if so pm me

 

[vw_motorsports]

Jonsered clutch covers

need 2 clutch covers for a 2152 and a 2150?

 

[little possum]

Any body have a 288 case that isnt all busted up?

I have a 360 professional Homelite needing a home- I know the boot is tore.

Alpina 55- IDK anything about this saw really. But I dont see me getting around to fixing it.

Found some XL-101 parts and some super EZ parts also.

 

[Saw Dr.]

Any body have a 288 case that isnt all busted up?

I have a 360 professional Homelite needing a home- I know the boot is tore.

038 project. Small hole in the gas tank, no air filter or cover, recoil is froze up. But exhaust side of Piston looks like new

Alpina 55- IDK anything about this saw really. But I dont see me getting around to fixing it.

PM sent.