Swap meet...

[HittinSteel]

If this was directed to me, I was after a trade. I wanted to try here first, as there are people here that want to help, not just haggle $ and cents. If not then I apilogize. carry on

Drew

Believe it was for the guy trolling for a shinny buyer

 

[nmurph]

Believe it was for the guy trolling for a shinny buyer

yes.....not for you crane!!!!

 

[Kwdog75]

I'll post a picture for you so you can decide which it is. Top or bottom one. I've got an extra set of the small and an extra inner large one.

Beauty saw!!!!!

 

[Eccentric]

ok the 25 mini and the 2.0 mini macs are all apart and the 25 needs a fuel line and the 2.0 needs a new piston and cylinder so it's just for parts.but the mini mac 30 is still togeather but needs a carb kit to run. it will run when you pour mix down the carb and it will run untill the mix runs out then dies. send pm for more info. would like to just get rid of them because i don't know much about these macs thats the reason i don't fix them

I love that last "I don't know much about these macs that's the reason I don't fix them".
My reason for not fixing them is because I do know something about them....LOL Mike

That's just what I was going to say Rupe!!!!:hmm3grin2orange:

 

[tlandrum]

I'll post a picture for you so you can decide which it is. Top or bottom one. I've got an extra set of the small and an extra inner large one.

id say its the small

 

[Bowtie]

Jonsered 2095 parts saws

I have 2 (not complete) parts 2095 saws I would trade.

One has a good P/C already bolted to a good bottom end.

There are 2 cases assembled, 2 carbs, intake systems, 2 cylinder covers, one has melted plastic at the front, other is good, one air filter, one muffler, mos of 2 trigger handles, one handlebar, one felling spike, one case has oiler setup, one dont. Comes with a new coil, and a used coil, one clutch and drum, and I have a clutch cover coming. Also assorted screws, and maybe a few other parts i forgot.

Would love to trade for a parts 066 or 064, or maybe anything else?

 

[MadMax5578]

Still looking for some Olympic 481 parts:
-inner felling dog
-chain tension screw
-ignition coil

Have some miscellaneous parts and $$$

 

[SawGarage]

I have 2 (not complete) parts 2095 saws I would trade.

One has a good P/C already bolted to a good bottom end.

There are 2 cases assembled, 2 carbs, intake systems, 2 cylinder covers, one has melted plastic at the front, other is good, one air filter, one muffler, mos of 2 trigger handles, one handlebar, one felling spike, one case has oiler setup, one dont. Comes with a new coil, and a used coil, one clutch and drum, and I have a clutch cover coming. Also assorted screws, and maybe a few other parts i forgot.

Would love to trade for a parts 066 or 064, or maybe anything else?

Bowtie..

what are you needing? I have 066 stuff....

PM me.

J

 

[Bowtie]

Bowtie..

what are you needing? I have 066 stuff....

PM me.

J

PM sent.

 

[huskydude]

husqvarna 44 tank. I would prefer to trade stuff for it to keep the project on a budget. I have a 262xp top cover with filter, and some 61 parts (no top cover/brake/piston)

 

[Honkie]

I also have a clean husky 285cd that runs, but may need crank seals. looking to trade for a smaller saw.

 

[vw_motorsports]

I also have a clean husky 285cd that runs, but may need crank seals. looking to trade for a smaller saw.

PM sent

 

[torence 20]

jonsered 111s

hey guys lookin for a bucking spike for a jonsered 111s and an oil cap for the same saw, if any one should have one shoot me a pm please thanks guys

 

[Duke Thieroff]

Does anyone have a Power Machinery 340 or a Skil 1644 parts saw they don't need?


I have one in decent condition, but you never know when you'll need parts


Got some odds and ends around here you might be interested in.



CT

 

[treetrasher]

338

i have a complete saw hit me:yoyo::yoyo:

 

[Work Saw Collector]

i have a complete saw hit me:yoyo::yoyo:

Ok hold on I'm going after my stick. :hmm3grin2orange:

 

[jbird77]

husky 285 cd

i also have a husky 285 cd but mine needs a ignition it will start adn run but only for a few seconds then dies, what ya got ?

 

[Mastermind]

I have a nice 36" .404 Stihl bar for the 070-090. Got a nearly new 20" 3/8 Husqvarna bar. I also have some 066 parts to trade, good fuel tank, jug and slug, crank, coil, poly flywheel, etc... I have two good fuel tanks for a 028, a 028 super crankcase, several other parts for the 028s. A new 044 piston. Lots of other Stihl parts.

I'm needing some 046 parts and some 026 parts.

046

Top cover
Everything from the carb back for the HD air filter except the cover
Chainbrake handle
Spring covers
Other small parts, surely.

026

Top cover
Air filter
Piston
Rear part of muffler
Recoil guts

Pm me for more pics, but here's a few.

 

[dh1984]

hey fellers i need a fly wheel and starter for a poulan 380 i have some poulan stuff to trade and green backs the part numbers is 15085 and 029193

 

[MS460WOODCHUCK]

I have a very good running PM700 with 28'' Mac bar and chain to trade. If anyone's interested PM me.