SawGarage
Addicted to ArboristSite
My luck, the baby will be dropped in my arms FOR A REASON :censored:
and you know why...
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
My luck, the baby will be dropped in my arms FOR A REASON :censored:
and you know why...
Chris J.
Addicted to ArboristSite
For Trade:
Husqvarna recoil, part 5017768 (01), fits models 61, 66, 266, & 268. Plastic is faded & scuffed, but there's are no cracks, & it seems to recoil just fine. I've never had it on a saw, it's a 'mystery' part I found mixed in with some Jonsered parts.
Note--Apparantly Husky over the years made a few changes to at least the 61 & 66. I don't know what all they changed, but the recoil part # changes. I found the part # in the 1989 IPL.
Husqvarna recoil, part 5017768 (01), fits models 61, 66, 266, & 268. Plastic is faded & scuffed, but there's are no cracks, & it seems to recoil just fine. I've never had it on a saw, it's a 'mystery' part I found mixed in with some Jonsered parts.
Note--Apparantly Husky over the years made a few changes to at least the 61 & 66. I don't know what all they changed, but the recoil part # changes. I found the part # in the 1989 IPL.
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,172
i need a carb partition for a 61. it's a small plastic piece that surrounds the intake runner and seperates the carb box from the cylinder.
i don't have anything to trade except little green pieces of paper with pictures of dead presidents on them.
i don't have anything to trade except little green pieces of paper with pictures of dead presidents on them.
HittinSteel
Addicted to ArboristSite
I probably have that......... sent you a PM
nmurph
ArboristSite.com Sponsor
- Joined
- Nov 26, 2007
- Messages
- 16,162
- Reaction score
- 7,172
replied...thanks.
Chris J.
Addicted to ArboristSite
For Trade:
Jonsered 910 clutch cover. It doesn't have any of the CB parts, looks as though it has a factory 'block' installed where the CB arm would go into the cover, no chip deflector. Has a chip & a crack (which isn't bad, could be repaired with some J-B Weld). Of course I'll provide photos to anyone interested.
Jonsered 910 clutch cover. It doesn't have any of the CB parts, looks as though it has a factory 'block' installed where the CB arm would go into the cover, no chip deflector. Has a chip & a crack (which isn't bad, could be repaired with some J-B Weld). Of course I'll provide photos to anyone interested.
Brian- you mean for the on/off switch? You could actually make one of those in about three minutes...
Thanks guys
she's in pain, uncomfortable, gets sick ALOT, bla bla bla. she's 5'1" so it takes alot out of her...especially being on her feet all day...
Hell, so I don't have to hear it, I'll trade a couple LOW hr saws for a job...
395xp
066 flat-top with decomp
CLEAN husky 40
J
You probably already know this J, but a few foot massages now on the pregnant one will buy you a lot of leniency later on- I speak from experience.
Brian13
Addicted to ArboristSite
I didnt think about that until after I had already posted. Saw has got me frustrated and not thinking straight LOL.
SawGarage
Addicted to ArboristSite
No soup... her feet are VERY ticklish ...lol.
I try my best though...
Oh well, not to worry- I'm sure you pamper her in many other ways.
I need a MS 441 clutch cover. What do ya need in trade?
STIHL880
ArboristSite Operative
Clutch Cover.
Does anyone have a clutch cover for a STIHL 026? I need one.
(I'm rebuilding and dedicating this 026 to my uncle. since after all it was his favorite saw.)
Anyone got one? thanks.
Does anyone have a clutch cover for a STIHL 026? I need one.
(I'm rebuilding and dedicating this 026 to my uncle. since after all it was his favorite saw.)
Anyone got one? thanks.
I have a few things I'm throwing on the trading pile- a new 441 piston and rings (OEM Stihl), new 372XWP piston and rings (OEM Husky), a complete, running Homelite 550 wrap handle saw (western style), and a number of different bars. I have a few different bars available for the 550. I'll post pics of it tomorrow.
What are you looking for in trade on the 550?
Quinn-
I have a clutch cover you can have, it's brand new. My little contribution.
Oh, other classic saws. I'm not really a Homelite guy per se', although I have a few Homelites kicking around because they're cool saws. This 550 is a low-hour old man saw that runs good and has great compression.
firefighter33
ArboristSite Guru
What bars do u have? Need some long bars for xl925,husky 288 and a 044. Also would be interested in that 550. Lmk
I don't have any Husky or Homelite bars available. I might have a 32" in regular Stihl mount.
Like I said on the 550, I'm open to interesting or unusual classic saws- those that I don't have in my stable yet.
Eccentric
Mister Wizard
I have an interesting and unusual classic saw to trade for the 550. Doubt you'd go for it though. It's a somewhat tired, but complete Mono/Wards AH58 powered WD60 with a 25" roller nose and a good loop of 7/16" chain. It's more unusual, and greater in displacement than the Homelite 550. Most likely not near as desirable as the the Homie 550 though I'm afraid.
firefighter33
ArboristSite Guru
Guess I'm out on the 550 don't have anything like that to trade oldest saw I got is the 925 and it took me months to find one of them! I'm trying to find some stuff but its hard round here.
oldest saw I got is the 925 and it took me months to find one of them! I'm trying to find some stuff but its hard round here.
Guess I'm out on the 550 don't have anything like that to trade
Did you still want this 029 air filter cover? It's in good shape and looks nice but is missing the twist-lock knob to clamp it to the air filter. I also have a new 290 air filter cover up for grabs. Just pay for shipping.
Yeah I already have two of those that I'm not really interested in doing much with. One I got for free locally, the other I got on trade from a member here. I'm going to pull both motors and make them into go-kart machines.
