Swap meet...

[Harzack223]

couple saws for trade or sale

I have a couple parts saws that I don't use and don't plan on using or fixing.

stihl 041 starts and runs, I think it needs a coil dies once warmed up.

Stihl 030 not running but all there in decent shape for its age.

McCulloch super 44a runs fine, leaks oil out of bottom of case and oilier works when it wants to.

McCulloch Timberbear parts saw haven't touched it no nothing about it.

Poulan countervibe 3400, starts runs and idles fine, needs air filter and filter cover.

Olympic 240 automatic, small saw I had it running and now it won't. carb problems still I assume.

Echo cs-4400 had a tree fall on it I think, handle is bent little broken plastic but starts and runs fine. The tank vent got ripped off so I bought a new one and haven't put it on yet.

McCulloch PM 310 starter pawls are trash, didn't go any further with it.

I am open to all trades. I am mostly looking to clean out some space.

I am in need of a husky 359 muffler and chain cover with chainbreak parts.

Also in need of a stihl ms290 piston and or cylinder.

 

[cbolyard]

I have a Stihl chain brake handle I have no use for. I believe its from an 064, part number is 1122 792 9105. It's in good shape save a little heat damage from the muffler. Trade for cash or 046/460 handlebar or???

 

[sefh3]

Stihl 056 Filter

I'm looking for the complete filter assembly for this saw. I'm sure I can find something someone is looking for to trade or $$$$$$.

 

[Bowtie]

Im looking for bars. I have more saws than bars. I am looking for a 20-25" bar for a Husqvarna 365/372, and 2 25-32" bars for 064's.

 

[s13rymos]

I need a air filter for a David Bradley direct drive saw model number 917.60028

 

[MS460WOODCHUCK]

I have a 088 MAG with a new 36'' .404 bar and 2 new chains. 1 is skip tooth that has never been used and other is full comp with 1 sharpening on it. Also have original 41'' bar with 1 chain, chain is also new or close to new. This 088 runs perfect with very strong compression. The plastic is faded like most other older stihls. The chainbrake handle works very good but has had some fixing on it, it will never need anymore fixing it will last forever. This saw runs great as I said earlier and it starts up within a couple of pulls every time. It also has a 3/4'' pipe for a MM. It also has a new air and fuel filter. I am looking for a smaller saw and some to boot. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws021.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws021.jpg" border="0" alt="Photobucket"></a>

I also have a 36'' alaskan mill to throw in with this 088 or maybe sell seperate. Prefer together though.

 

[Saw Dr.]

I also have a 36'' alaskan mill to throw in with this 088 or maybe sell seperate. Prefer together though.

Smaller saw, huh? I have a Poulan 2300 I'd trade. I could even kick in 20 or 30 bucks to even things up........

Now you're hurtin' me. I guess I'm going to have to toss in the FACTORY CASE with that 2300. If you pay shipping both ways, I'll send a few very sharpen-able safety chains too! See what a nice guy I am? :greenchainsaw:

 

[MS460WOODCHUCK]

Now you're hurtin' me. I guess I'm going to have to toss in the FACTORY CASE with that 2300. If you pay shipping both ways, I'll send a few very sharpen-able safety chains too! See what a nice guy I am? :greenchainsaw:

Am I sensing some sour feelings?

 

[Saw Dr.]

Am I sensing some sour feelings?

Nah, man. Just pullin' your chain a little. It would be entertaining to see the offers you're getting on that 088, though. I'd love to have it, but there is very little around here that I could even find to use it on.

 

[sefh3]

Nah, man. Just pullin' your chain a little. It would be entertaining to see the offers you're getting on that 088, though. I'd love to have it, but there is very little around here that I could even find to use it on.

Oh put a 6 ft bar on it and trim your peach trees in the spring. You'd never use a ladder again.

 

[bruce6670]

2094 Jonsered

Anyone have a 2094 Jonsered parts saw?

 

[sloch24]

I have a 088 MAG with a new 36'' .404 bar and 2 new chains. 1 is skip tooth that has never been used and other is full comp with 1 sharpening on it. Also have original 41'' bar with 1 chain, chain is also new or close to new. This 088 runs perfect with very strong compression. The plastic is faded like most other older stihls. The chainbrake handle works very good but has had some fixing on it, it will never need anymore fixing it will last forever. This saw runs great as I said earlier and it starts up within a couple of pulls every time. It also has a 3/4'' pipe for a MM. It also has a new air and fuel filter. I am looking for a smaller saw and some to boot. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws021.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws021.jpg" border="0" alt="Photobucket"></a>

Huh... I had one that looked JUST like that, only the 36" bar was cleaner.. and it didn't have a muffler mod.. I traded mine off to a guy for a like-new ms660... You'll have to let me know how you pan-out!

 

[MS460WOODCHUCK]

Nah, man. Just pullin' your chain a little. It would be entertaining to see the offers you're getting on that 088, though. I'd love to have it, but there is very little around here that I could even find to use it on.

Oh I'm sure you could find something to use it on even if a 200t would work for that something.:monkey:

 

[bowtechmadman]

Picked up an old Stihl 015 rear handle (runs well, needs clutch) and a Homelite Zip (needs muffler, no spark). Anyone needing parts or has parts let me know.

 

[sefh3]

Homelite 750

I'm looking for the top handle, carb plate, and muffler for this saw. If someone has these parts PM me.

 

[Saw Dr.]

I'm looking for the top handle, carb plate, and muffler for this saw. If someone has these parts PM me.

Good luck on the muffler. Those things are getting pretty scarce. I'd try BillG for the other stuff.

 

[imc188222]

Stihl 020av

I am looking for a parts saw. Or just parts. I need points and condenser, coil, carburetor and top handle.

 

[TRI955]

I've got an old Remington sprocket nose bar and a new gasket set for a Stihl 08/S10 saw. May have a few more parts for that 08/S10 too....

I'm always looking for Shinny parts and saws.....

 

[blsnelling]

I've got an old Remington sprocket nose bar and a new gasket set for a Stihl 08/S10 saw. May have a few more parts for that 08/S10 too....

I'm always looking for Shinny parts and saws.....

Does it have the stamped Stihl logo on it? Do you have the air filter screw on cap?

 

[Harzack223]

Hey all, I'm looking for a stihl 044 046 or 066, may have a couple smaller saws to trade along with cash.