Swap meet...

[MS460WOODCHUCK]

I have a 088 MAG with a new 36'' .404 bar and 2 new chains. 1 is skip tooth that has never been used and other is full comp with 1 sharpening on it. Also have original 41'' bar with 1 chain, chain is also new or close to new. This 088 runs perfect with very strong compression. The plastic is faded like most other older stihls. The chainbrake handle works very good but has had some fixing on it, it will never need anymore fixing it will last forever. This saw runs great as I said earlier and it starts up within a couple of pulls every time. It also has a 3/4'' pipe for a MM. It also has a new air and fuel filter. I am looking for a smaller saw and some to boot. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws021.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws021.jpg" border="0" alt="Photobucket"></a>

 

[stihlboy]

I have a 088 MAG with a new 36'' .404 bar and 2 new chains. 1 is skip tooth that has never been used and other is full comp with 1 sharpening on it. Also have original 41'' bar with 1 chain, chain is also new or close to new. This 088 runs perfect with very strong compression. The plastic is faded like most other older stihls. The chainbrake handle works very good but has had some fixing on it, it will never need anymore fixing it will last forever. This saw runs great as I said earlier and it starts up within a couple of pulls every time. It also has a 3/4'' pipe for a MM. It also has a new air and fuel filter. I am looking for a smaller saw and some to boot. PM me if interested.
<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=saws021.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/saws021.jpg" border="0" alt="Photobucket"></a>

pm sent

 

[MS460WOODCHUCK]

pm sent

Yes it was. Anyone else interested?

 

[parrisw]

Yes it was. Anyone else interested?

What exactly are you looking for?

 

[Saw Dr.]

Yes it was. Anyone else interested?

Smaller saw, huh? I have a Poulan 2300 I'd trade. I could even kick in 20 or 30 bucks to even things up........

 

[Meadow Beaver]

I'll throw in an extra chain or two with that 36" reduced weight. ( 2 Brand new chains)

 

[MS460WOODCHUCK]

Smaller saw, huh? I have a Poulan 2300 I'd trade. I could even kick in 20 or 30 bucks to even things up........

LMAO:hmm3grin2orange:

 

[caddguy]

088 swap

PM sent MS460WOODCHUCK!

 

[wigglesworth]

Ive just acquired a bunch of 288xp and 181xp parts, 4=stripped 288 cases with cranks 1 has a P&C, 1=188 case with crank. A couple of side covers, and a bunch of small parts. All is condition unknown until I can check them out. PM me if you need something and I will check them out.

 

[Honkie]

Anyone have a ignition coil and a muffler for a Mac pm-610??

 

[Bowtie]

Anyone have a ignition coil and a muffler for a Mac pm-610??

I think I have the coil you need.

 

[Honkie]

I think I have the coil you need.

Nice! what ya need? no big stihl parts, but a bunch-o-028 and a few Hommie XL-12 parts....



I tried to get a part number off the coil, but there wasnt one. It is grey, with the clear epoxy on the bottom. The fly-wheel is stamped with the Mac logo....

 

[Harzack223]

Is the muffler on the Timberbear the same as the 610? Because I have a timberbear just sitting in the shed.

 

[Bowtie]

Nice! what ya need? no big stihl parts, but a bunch-o-028 and a few Hommie XL-12 parts....



I tried to get a part number off the coil, but there wasnt one. It is grey, with the clear epoxy on the bottom. The fly-wheel is stamped with the Mac logo....

Let me look in the morning to make sure. If I have the right one, its yours.

 

[Honkie]

Is the muffler on the Timberbear the same as the 610? Because I have a timberbear just sitting in the shed.

I think they are the same, just badged different, but I have been known the be wrong at times!

I have the piece that attaches to the jug, but, there seems to be a second piece that looks like it slides in and snaps into place behind the clutch and sprocket?

Lemme know!

 

[Honkie]

Let me look in the morning to make sure. If I have the right one, its yours.

Thanks Bowtie!

 

[Harzack223]

I am looking for a stihl 048 super if possible and if not just an 048.
I have a few smaller saws worth trading some parts and cash. let me know willing to work it out.

 

[sefh3]

I'm looking for some dawgs and an air filter for a Stihl 056. If anyone has these I should find something to trade for.

 

[heimannm]

63041

I am desparate for the duck bill valve to go in the 10 Series McCulloch carburetors, part number 63041. I would like to get 4 or 5 if possible.

Bob Johnson doesn't have any and neither does the crew of Discount Marine.

Help!

Mark

I have lots of big McCulloch stuff as well as $$ if necessary.

 

[cbolyard]

I have a Stihl MS460 for parts or to fix. Missing a handlebar, oiler, bar and chain. It has an 064 chain brake handle on it that doesn't engage the chain brake, but all the parts for the chain brake are there and work like they should. There are a couple pieces missing from the clutch cover (long style) and a small crack in the air filter cover. I bought it with the intent of fixing it up but the wife won't let me spend any money on it. I have opened up the factory port on the muffler and cleaned the saw up some, but that's about it.