Swap meet...

[Eccentric]

Looking for misc parts for a Stihl 031AV ... or an 031AV parts saw with a blown P&C?

Rim sprocket - 3/8 pitch
Drum for above
Needle bearing cage

Carb cover w/knob & spring

Complete fuel cap assembly

Fuel tank gasket (between tank & cover)

I have a couple of new Mac bars and presidential coupons ..... thanks!

Ted I may have a carb cover with knob and spring. Gotta dig though a box or two to find it. Need an 031 cylinder? What other new Mac bar do you have to part with? I know of the one that we're already talkin' about....

 

[o8f150]

Do I wanna know what you are referring to here???? :dunno:

he bought the husky 360 special off the AS classifieds here and is going to put a 371 top on it

 

[Warped5]

Ted I may have a carb cover with knob and spring. Gotta dig though a box or two to find it. Need an 031 cylinder? What other new Mac bar do you have to part with? I know of the one that we're already talkin' about....

I also have a 24" NOS Mac bar w/sprocket tip. 10-10 style mount. I'd give it up for the parts saw.

 

[wendell]

Anybody have a Husky 357 carb and air filter?

 

[SawGarage]

.....go find me some Homelite Super XL-Automatic parts. :biggrin:

Done


what do you need???

he bought the husky 365 special off the AS classifieds here and is going to put a 371 top on it

oh, the BS saw...got it...

really? :bang: I would NEVER think Wigs would buy a saw that cost that much!

i should really consider calling Jeremy to offer him a 346 muffler & a 372 cylinder oke:

 

[Chris J.]

Any interest in a Homelite C-72? It would be PHO, the b&c ain't worth the cost of shipping :msp_sad:, some photos & info in this thread

http://www.arboristsite.com/chainsaw/173766.htm

For some reason the photos in the thread aren't opening for me, let me know if you're having problems opening them.



I'm looking for the following parts/parts saws:

Jonsered 920--a complete/nearly complete parts saw would be nice (mine's basically a carcass).

Jonsered 2095--muffler (mine's rough, but functional), internal parts for the throttle trigger (mine are rusty), clutch cover with a functioning CB. It'd be nice to have a donor saw.

Echo CS-520--good p&c, and a chainbrake band.

The Homelite C-72 is still available.......I still can't get the photos to open, even after I re-loaded them :bang:, and I haven't received a reply from The Powers That Be in the Support & Announces forum .

 

[lpmfg]

looking for stihl 029 piston and cyl, stihl 038 piston and cyl, husky 268 coil

 

[srcarr52]

394/395 chain brake

I'm looking for a couple of 394/395 chain brake assemblies, also misc other bits. I got husky parts and greenbacks to trade.

 

[struggle]

I also have a 24" NOS Mac bar w/sprocket tip. 10-10 style mount. I'd give it up for the parts saw.

I might be interested in the 24" bar if it will fit a PM800, let me know what you might want for it?

I have a 032 but it is a very nice running saw except I think the L idle is plugged as it is not idling proprely but fine off idle, just have not pulled the carb on it yet to deal with it.

 

[Eccentric]

I also have a 24" NOS Mac bar w/sprocket tip. 10-10 style mount. I'd give it up for the parts saw.

Crap! I'd like to have that bar. Got nothing you'd want in trade methinks. Let me mull it over as I drive to work and get back to you.

 

[wigglesworth]

I would NEVER think Wigs would buy a saw that cost that much!

i should really consider calling Jeremy to offer him a 346 muffler & a 372 cylinder oke:

It didn't cost me that much

And why ain't u called yet?

 

[struggle]

Crap! I'd like to have that bar. Got nothing you'd want in trade methinks. Let me mull it over as I drive to work and get back to you.

Think about how much money you don't have and other more important things than chainsaws and so forth..........................:yoyo:

 

[Jon1212]

I have a Stihl 16" Rollomatic 3/8th bar available. Part# 3003 000 8913. It is in pretty good shape, some paint is gone, but the rails are fairly smooth, and straight.

 

[tbone75]

Looking for a 028 super piston.May have something to trade you like?Or some green paper.

 

[MiracleRepair]

I've got a Homelite xl auto that needs carb work (if I remember correctly). An 025 parts saw, and some 028wb parts. So if you need anything make me an interesting trade.

 

[Work Saw Collector]

I've got a Homelite xl auto that needs carb work (if I remember correctly). An 025 parts saw, and some 028wb parts. So if you need anything make me an interesting trade.

I need some 028 parts what you got and what do you need?

 

[thomas1]

Looking for a 028 super piston.May have something to trade you like?Or some green paper.

This one? Not mine, just happened to see the listing.

Stihl 028 chainsaw piston kit new OEM parts

 

[kmcinms]

Done


what do you need???

Flywheel(rotor) and a coil for Super XL-Automatic. Coil might be ok, one leg got tweaked pretty hard. I have the Wico rotor with mesh screen over the dogs with wide spaced fins if that matters. Holler if you have anything for me. Muchas Gracias

 

[MiracleRepair]

I need some 028 parts what you got and what do you need?

I've been hit pretty hard on that 028 so far. I will look in the morning, but I think I'm down to a good piston, coil, brake handle, flywheel.

Forgot to mention, lots of 015L parts, and a complete running 015av. Also have a very low hour parts 041 (first tree the guy cut with it, he hung the saw up and the tree broke the top handle bar mount). Will have a husky 49 up for trade in the next few days (parts or runner, don't know yet)

 

[Brushwacker]

I've been hit pretty hard on that 028 so far. I will look in the morning, but I think I'm down to a good piston, coil, brake handle, flywheel.

Forgot to mention, lots of 015L parts, and a complete running 015av. Also have a very low hour parts 041 (first tree the guy cut with it, he hung the saw up and the tree broke the top handle bar mount). Will have a husky 49 up for trade in the next few days (parts or runner, don't know yet)

I have most what you don't for the 028's.

Also have a poulan pro 260 I got out of a scrap pile, not the greatest overall condition but some usable parts.

Have a craftsman - red poulan top handle in lesser condition then the 260.

Also have an older blue xl12 homelite, with a broken handle mount on top and the bar is lightly bent I believe, it fires on prime,think it needs a fuel line, may be the carb gone through would get it going, or who knows. Compression feels good. I think its pretty much complete except the broken - bent prts and looks good for its age.

Have some bars,mostly new, most 20"and less, Husky mounts, Stihl, 16" fit old echo + Mac, some new and used small bars I'm not sure what all they fit but probably could figure it out if needed.

If no one else is ahead of me, i'd be interested in the 041 provided the ignition system is good.
Interested in new chainsaw chains 3/8 and .325 most any length if someone wants to trade theirs they don't need.
While I'm at it, I'm fixin for a friend, if I can find the parts way less then what new cost from stihl,a ts 400 stihl. Needs a flywheel,and coil, and I think the air filter cover and and the filter elements unless he has them at home.