Swap meet...

[Eccentric]

Now why did you have to go and say that!Just after I get 2 of them! :hmm3grin2orange: I just think they look cool!

Guys either love 150's or hate 'em. You know where I stand. That love/hate thing goes for both the looks of the saws and the "ease" of service. I think they're butt ugly, but others thing they're sleek and stylish. They are pretty potent for their size when they're running. I'd rather have a Super E-Z...

its a sprocket nose 18" 72dl its the stock bar with oregon chain i believe its the .325

Sounds good. Are you interested in my 16" Homelite hardnose and a 59DL loop of chain for your SXL?

While we are on the subject of Homelite bars, is this a K095 mount?
View attachment 198249

Shown on top of an 20" Oregon #200---D196. Slot is .331" wide.
Faint markings: ??29 Homelite
GVA 16503

Was in the box with the ebay XL-101 parts saw.

It looks like a K095 mount bar to me Carl. Does it fit your XL76-130 saws?

Aaron, I've got a Super EZ bar if you strike out. Don't sell those 150's short, Homelite new what they were doing when they called it a 150. It'll break down, and take 150 pulls before the owner smashes it......................:biggrin:

Thanks Jon. I'm not hurting for an E-Z bar at the moment. More just trying to help him out with his SXL.......and get another E-Z bar in the process since I've got more XL mount bars than E-Z bars. I'll take you up on your offer whenever I head up your way for a little tag team CL saw pickin' action...

 

[Modifiedmark]

Before I go ebay shopping, does anyone have any Dolmar 133/144 parts? Need a crank and cases, recoil cover, throttle linkage rod, clutch glide disk, outer stop disk and nut.

I may have some junk here, let me know what your looking for.

 

[Mastermind]

Before I go ebay shopping, does anyone have any Dolmar 133/144 parts? Need a crank and cases, recoil cover, throttle linkage rod, clutch glide disk, outer stop disk and nut.

I may have some junk here, let me know what your looking for.

I have the recoil and a complete clutch. I chunked a case in the dumpster a few weeks ago. The crank was shot in it though.

 

[tbone75]

Randy you can use a 330 P&C on that 2700 but you will need to grind out the crank case a little because the piston skirt is longer and the cylinder bolt holes need to be enlarged.

 

[Mastermind]

Randy you can use a 330 P&C on that 2700 but you will need to grind out the crank case a little because the piston skirt is longer and the cylinder bolt holes need to be enlarged.

That sounds fine. Send me one. :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[SawGarage]

Now why did you have to go and say that!Just after I get 2 of them! :hmm3grin2orange: I just think they look cool!

I HEARD that a youngin'with a WORTHLESS STIHL hat gave you one for a NICE knife...

I told him i'd trade you TWO of them, with a CUSTOM case, for a knife

Saul actually. It was nice to meet you as well!
I hope you enjoy your trip to New England.

Your just hoping MORE of his kind DISPLACES the YUPPIES of the area, huh?? lol
(I would concur with such feelings... )

Looking for a Jonsered 625 crankcase.

Shoot me a PM if you have something. I don't check the this thread very often.

PM Scent...

 

[tbone75]

That sounds fine. Send me one. :hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

I would if I had one? :biggrinbounce2:

 

[tbone75]

I HEARD that a youngin'with a WORTHLESS STIHL hat gave you one for a NICE knife...

I told him i'd trade you TWO of them, with a CUSTOM case, for a knife





Your just hoping MORE of his kind DISPLACES the YUPPIES of the area, huh?? lol
(I would concur with such feelings... )




PM Scent...

Sorry already got 2 now LOL AFTER everyone tells me how crappy they are! :spam:

 

[Eccentric]

Sorry already got 2 now LOL AFTER everyone tells me how crappy they are! :spam:

Heck. If you like how they look, then you're home free. They're decent runners (when they run)...................and a RAGING PAIN IN THE ASS to work on. If they ain't runners.............then just put them on a shelf over your workbench, look at them, and smile...

 

[tbone75]

Heck. If you like how they look, then you're home free. They're decent runners (when they run)...................and a RAGING PAIN IN THE ASS to work on. If they ain't runners.............then just put them on a shelf over your workbench, look at them, and smile...

I gots to make it run!Then it goes on the shelf That way I can say it ran LOL

 

[tbone75]

Anyone happen to have a coil for a 031?

 

[Eccentric]

I gots to make it run!Then it goes on the shelf That way I can say it ran LOL

Well you know it DID run at least once!:jester:

Anyone happen to have a coil for a 031?

Nope. Sent the spare I had with my 031 when I sold it to a member here. I do still have a good used cylinder for one though...

 

[stihl_collector]

Hi guys i'm chasing a few bits,

Stihl 064 p&C prefer mahle
Stihl ms460/046 P&C prefer mahle
Husqvarna 395 parts let me know what u have i may need it
Sachs Dolmar 153 muffler front cover, recoil screws and electronic or points ignition.

I have some parts but would be more greenies as payment.

Please pm me.

Thanks.

 

[67L36Driver]

Before I go ebay shopping, does anyone have any Dolmar 133/144 parts? Need a crank and cases, recoil cover, throttle linkage rod, clutch glide disk, outer stop disk and nut.

I may have some junk here, let me know what your looking for.

Ah Ha! So you are the one outbidding me on the big cube Homies!:computer2:

 

[67L36Driver]

It looks like a K095 mount bar to me Carl. Does it fit your XL76-130 saws?
..

Yup, fits the 101 it came with but the oil hole alignment isn't the best I've seen.

 

[RenaisSAWnceMan]

ROLLER-NOSE BAR for 090

Lookin' for a clean/sound roller-nose bar to fit an 090, in the 25-32" range.

Might have some schtuff to trade, or notes of the realm.

 

[Brushwacker]

C 5 and C 51 Homelite Powerheads

Pretty sure both need top end overhauls and a little more or less. C 51 starts, runs, but goes from little to no power quickly, not good compression.
I forget how long the C 5 ran, might of been a little more then a pop on prime, but I pulled the mufflers of both saws and the pistons looked rough and dirty. Probably swallowed to much carbon over the years would be my guess. Both look fair to decent for their age.
Might take a bit newer Stihl parts saw for trade, new chains or ?. Prefer a local trade and I wonder different directions now and then mostly within IN so a halfway point might be possible. There is a farm swap meet Sept. 11 Near Knox, IN, I aim to take them there if nothing happens sooner.

 

[67L36Driver]

Pretty sure both need top end overhauls and a little more or less. C 51 starts, runs, but goes from little to no power quickly, not good compression.
I forget how long the C 5 ran, might of been a little more then a pop on prime, but I pulled the mufflers of both saws and the pistons looked rough and dirty. Probably swallowed to much carbon over the years would be my guess. Both look fair to decent for their age.
Might take a bit newer Stihl parts saw for trade, new chains or ?. Prefer a local trade and I wonder different directions now and then mostly within IN so a halfway point might be possible. There is a farm swap meet Sept. 11 Near Knox, IN, I aim to take them there if nothing happens sooner.

Darn, just got a C5 in the mail last Friday and am needing a more suitable bar.

Have XL-101 parts on hand.

 

[Big Dan]

Hey ya'll looking for a large mount bar for a Stihl 056 Would like a 24+ Also a clutch cover if someone has one? Condition of both doesnt matter as long not broken or To bad!

Also looking for some Stihl 290 parts. Muffler, 4 Cylinder bolts and a good coil.

I've got 2 large mount bars for the 056-090 that I'd like to get rid of. One's a 36" round nose and the other is a 36" sprocket nose. PM me if you're interested

 

[little possum]

Shop clean out:
Pioneer 610- was a runner- Like new chain
Homelite original E-Z- Full wrap, did run.
Mac D-36- Did run, has manual thumb pumper on the front
Dayton 2z461- did run, cracked cast inside muffler half- no bar
Montgomery Ward 2.8- Isnt locked up
Mac 250- early yellow top. Missing a few parts(mostly bolts)
Added 1-41 Mac.
Added Homelite 330 and a 360

All for swap. Looking for things that go bang, or ammo.

I could use a couple 288 parts. A good 288 piston would be nice. A half or full wrap handle. Clutch covers.. A good case. Or a parts saw