Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
gloud
ArboristSite Operative
Just did some work for a guy (swapping an EZ start system onto his 025 Stihl ) and I have the original Flywheel and starter assy. (025)
if someone needs one or has an EZ start they don't want I will trade. (the MS 210-250's use the same parts.)
if someone needs one or has an EZ start they don't want I will trade. (the MS 210-250's use the same parts.)
Mastermind
Work Saw Specialist
I'm needing a top cover, wrap handle, brake handle, trigger parts, brake small parts, trigger parts, coil, carb...............
A parts saw???????
Duke Thieroff
Fill your hands, you SOB!
Can anyone come up with a carb for an 038 Magnum II for me?
Looking to get rid of this Bing.
Cash and other stuff to trade.
Chris
Looking to get rid of this Bing.
Cash and other stuff to trade.
Chris
Warped5
WingNut
Anyone got any ideas where I can scare up a P&C from a parts saw? Makita DCS-520 or a DCS-52 ... on the Dolmar side it would be a 111 / 115 / PS-52.
I have ca$h and some other oddball things.
Thanks!
I have ca$h and some other oddball things.
Thanks!
MechanicMatt
Cut Split Stack Burn
I have a pile of dolmar 111i The P&C are very nice. What do you got??? Mines missing the intake, carb, etc.
I'm needing a top cover, wrap handle, brake handle, trigger parts, brake small parts, trigger parts, coil, carb...............
A parts saw???????
Randy I've got a box of parts for older 066s that might help you out. I can't remember what all is there for sure. I can get pictures of it from my dad in a day or so if you want me to.
Mastermind
Work Saw Specialist
sefh3
Addicted to ArboristSite
PM scent.
I'm in bad need of a air filter for a 034. Help???
Do you have a part number or picture? I might have one.
Mastermind
Work Saw Specialist
Mastermind
Work Saw Specialist
1 ✻ 1125 120 1600 1 Air filter ⇥ 1 45 945 204 (08.2000)
2 ✻ 1125 120 1605 1 Air filter ⇥ 1 45 945 204 (08.2000)
3 ✻ 1125 141 8300 2 Slotted nut ⇥ 1 45 945 204 (08.2000)
4 ✻ 1125 120 1615 1 Air filter, fleece ⇥ 1 45 945 204 (08.2000)
5 ✻ 1125 120 1620 1 Air filter, fleece ⇥ 1 45 945 204 (08.2000)
These are the numbers for the one I need. It's an older 034AV with out the intellicarb.
2 ✻ 1125 120 1605 1 Air filter ⇥ 1 45 945 204 (08.2000)
3 ✻ 1125 141 8300 2 Slotted nut ⇥ 1 45 945 204 (08.2000)
4 ✻ 1125 120 1615 1 Air filter, fleece ⇥ 1 45 945 204 (08.2000)
5 ✻ 1125 120 1620 1 Air filter, fleece ⇥ 1 45 945 204 (08.2000)
These are the numbers for the one I need. It's an older 034AV with out the intellicarb.
MechanicMatt
Cut Split Stack Burn
With any luck tomorrow Ill have for trade recoil, crankcase, clutch cover, rear handle. All for a Dolmar 111I. I Like the other german brand and swedish girls.
Duke Thieroff
Fill your hands, you SOB!
little possum
Crash and Burn
I have a few saws I could swap.
Pioneer 600- was a runner- Like new chain
Mac D-36- Did run, has manual thumb pumper on the front
Dayton 2z461 (Poulan 361)- did run, cracked cast inside muffler half- no bar
Montgomery Ward 2.8- Isnt locked up
Mac 1-43
Mac 250- early yellow top. Missing a few parts(mostly bolts)
Homelite 330 and 360
Looking for a nice 288 case. P/C, parts, whatever
Also looking for a P/C for a 372 for a friend.
Could use a spark plug cover for a DA-211, and a bar/chain for a KB6-KB7. Also a longer bar for a DA-211..
Pioneer 600- was a runner- Like new chain
Mac D-36- Did run, has manual thumb pumper on the front
Dayton 2z461 (Poulan 361)- did run, cracked cast inside muffler half- no bar
Montgomery Ward 2.8- Isnt locked up
Mac 1-43
Mac 250- early yellow top. Missing a few parts(mostly bolts)
Homelite 330 and 360
Looking for a nice 288 case. P/C, parts, whatever
Also looking for a P/C for a 372 for a friend.
Could use a spark plug cover for a DA-211, and a bar/chain for a KB6-KB7. Also a longer bar for a DA-211..
jimbo1490
ArboristSite Guru
I may have one. I've go a 'Pile-O-Carbs' and I seem to remember an 038 carb in the bunch. I remember it being a Tillotson. Do you know the carb number(s) in Tilly?
Jimbo
Mastermind
Work Saw Specialist
PM scent.
timberdollars
ArboristSite Operative
038 MagII
Whats wrong with the BING?
I have had lots of MagII's and always ran the BING, I have two of them now. BUT I've tried a couple times to run the Tilly from the 038 av and it"s NOT GOOD!!!! Even bought a new one from Tillotson but NO WAY!!! loose lots of RPMS and low speed torque, no matter what you do.
My 038 Mag II's are great with No issues at all with the BING. just my 2 cents worth.
Whats wrong with the BING?
I have had lots of MagII's and always ran the BING, I have two of them now. BUT I've tried a couple times to run the Tilly from the 038 av and it"s NOT GOOD!!!! Even bought a new one from Tillotson but NO WAY!!! loose lots of RPMS and low speed torque, no matter what you do.
My 038 Mag II's are great with No issues at all with the BING. just my 2 cents worth.
Duke Thieroff
Fill your hands, you SOB!
No problems with the Bing other than I need diaphragms for it and am having a hard time locating them, grabbed a Tilly this morning and got a kit. Found it local, thank you fellas.
Now I am looking for a slug and jug off of a Husky 268XP, could also use a clutch coverm (61, 66, 266 or 272 will also fit, chainbrake not necessary), and an air filter
Chris
