Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
gloud
ArboristSite Operative
I think I have one do you have a PN?
Madsaw
Addicted to ArboristSite
Got one in a like new saw that meet a tree.
I need an oil pump for a Stihl 044. Have some 046 parts to swap or green stuff.
gloud
ArboristSite Operative
I'll check tonight.
I have a 1125 648 0403 from a quick search it is for an 029 etc it is yours if you want it has a 1/2" crack in a non- critical spot and is dirty. I will drop it in th email tomorrow if you send me your mail addy.
Last edited:
MiracleRepair
ArboristSite Guru
Need inner and outer bar plates for husky 61. Parts or cash to trade
I've got too many saws on my workbench and need to clear the shelves a bit, is anybody interested in a minty homelite zip-b. The only issue is the recoil, it doesn't catch until it's pulled out about 10 inches. The p/c are n great condition and it runs like a champ, the paint is in great condition.
The wright c70 is low on compression but might only need rings and a honing, I haven't pulled the jug and have only looked in through the muffler.
Looking for Pioneer p-series saws, 038 super case( not stripped down), loops of 404 .058 chain, loops of 038 .050, or???
Thanks Kevin
The wright c70 is low on compression but might only need rings and a honing, I haven't pulled the jug and have only looked in through the muffler.
Looking for Pioneer p-series saws, 038 super case( not stripped down), loops of 404 .058 chain, loops of 038 .050, or???
Thanks Kevin
Duke Thieroff
Fill your hands, you SOB!
This ones for trade, it's a good running saw. Has a Tillotson carb on it, I still have the bing, though.
038 Mag II
Has new carb kit, fuel line, air filter.
Looking for saw but mostly green paper.
Chris
038 Mag II
Has new carb kit, fuel line, air filter.
Looking for saw but mostly green paper.
Chris
Chris J.
Addicted to ArboristSite
....Homelite C-72.Trade in the works on the C-72, & possibly for the Dayton 3Z072, and Disston DA-211 parts.
Photos of Disston DA-211 parts will be posted later today; my camera battery died just as I was getting to the NOS parts.
Still looking for:
Jonsered 2095 parts--Nearly all the fasteners, CB arm & paddle.
Jonsered 920 parts--Let me know what you have, chances are I need it.
Echo CS-520--Piston & cylinder
opcorn:.Poulan 5400 CV--Carb kit, fuel filter.
Poulan SD25--Carb kit.
Tree Sling'r
Addicted to ArboristSite
Tree Sling'r
Addicted to ArboristSite
.050 Husqvarna mnt. Oregon Power Match bar, Brand New.
I have a brand new 36" .050 Oregon Power Match bar, with no tip I would like to sell or trade for 044/440 - 046/460 parts. Husky mount.
PM me.
I have a brand new 36" .050 Oregon Power Match bar, with no tip I would like to sell or trade for 044/440 - 046/460 parts. Husky mount.
PM me.
Chris J.
Addicted to ArboristSite
Link to photos of Disston DA-211 parts.
Disston DA-211 chainsaw pictures by antoniosalieri - Photobucket
Disston DA-211 chainsaw pictures by antoniosalieri - Photobucket
Who has these? Are these yours?
Chris J.
Addicted to ArboristSite
Brad, yes, they're mine. I really need to change my Photobucket user name.
Echo Saws
I have a couple of echos climbing saws I'll sell or trade.
CS300 Top Handle and ring, and CS3450 Limb Saw
Both of these saws start up easy, run like new saws, and both with high compression. Cosmetically, they are 7 of 10.
All I had to do to them is clean them off, replace the primer bulb on the 3450, and clean the oilers out to get em gushing again. The 3450 has a different kind sprocket on it. I have a regular .050/ 3/8 chain on it, but it makes buzzy noise, and I think it needs a lo profile or something.
Would like 150 for both, or trade for some 036, 044, or 660 parts.
PMs
I have a couple of echos climbing saws I'll sell or trade.
CS300 Top Handle and ring, and CS3450 Limb Saw
Both of these saws start up easy, run like new saws, and both with high compression. Cosmetically, they are 7 of 10.
All I had to do to them is clean them off, replace the primer bulb on the 3450, and clean the oilers out to get em gushing again. The 3450 has a different kind sprocket on it. I have a regular .050/ 3/8 chain on it, but it makes buzzy noise, and I think it needs a lo profile or something.
Would like 150 for both, or trade for some 036, 044, or 660 parts.
PMs
Last edited:
Clean your pm box JJ. :smile2:
Done deal.
