Swap meet...

[forestryworks]

Lookin' for a used 044/046 Stihl 3/4 wrap handle.

May have a trade.

PM if you have one!

 

[Tree Wacker]

You can stop the China bashing any time. Zama makes lots of very good carbs, and the company if owned by Stihl. The carb in question is for a MS250 I believe.

This might help you in the future-

http://zamacarb.com/pdfs/APPL_CR2011.pdf

LOL i will quit saying stuff about the zama carbs.

but every carb i looked at didn't look nothing like this carb i got.so it makes me wounder if someone replaced the hi and low screws on this one. from a other carb or something before i bought the saw.becuase the hi screw is a whole lot longer then the low screw.

 

[Arrowhead]

Ed-

I'll look and see if I have this bar. I may even have this carb.

Thanks JJ
The bar and carb could be + or -.

 

[Madsaw]

Got some 3/8x.063 semi chisel Stihl chain for trade. Will trade link for link of .050 or will trade for a bar or 2 in .063 to fit large husqvarna mount.
Bob

 

[Work Saw Collector]

I'm tring to build a 038 out of some of my past parts saws. Here is my shopping list for this last one. Thanks guys.

chain adjuster
air filter cover screw
Throttle rod
chain catcher
7 pin rim, washer, and clip
both chain guide plates.

 

[o8f150]

i have a homelite 240 parts saw,, there is a lot of parts left on it,, i got this saw from muddawg for parts to fix another 240 that i am donating to a guy that needs it,,, most all the parts are there and it does run,, i can put pics up if needed,,,either pay for the actual shipping fo the power head or i can use 2-3 14" poulan/echo b/c's,,,they don't have to be new either,,,i also need a 32" 105 dl 58 guage chain,,, can be a good used one too

i can't believe no one wants this fantastic jewel of a saw,,this is a saw that everyone wants,,, my front door is getting torn off the hinges to grab this saw,, dang it i forgot,,, bump,,bump

 

[ChainsawmanXX]

Homelite EZ up for trade for some greenies
Runs good, idles good, I have a chain to go with it as well. Contact me with more info. Make an offer :smile2:

 

[o8f150]

I have a pile of the boxstore type poulan bars and chains here if that's the type your talking about.

hey scooter,,, your pm box is full

 

[struggle]

Could be a long shot?But I need a coil for a Homie 340.Its a 2 part coil I guess.I need both parts. TIA

Is that the same as what is on a 360?

I have the coil that reads off the flywheel. The part that clamps over the plug I don't have.

 

[tbone75]

Is that the same as what is on a 360?

I have the coil that reads off the flywheel. The part that clamps over the plug I don't have.

I don't know?I will try and look it up to see? Thanks

 

[Warped5]

I don't know?I will try and look it up to see? Thanks

Mr Bone, you don't have these 'issues' with those Dolmars, you know. :hmm3grin2orange:

 

[huskydude]

looking for a two piece coil for a husky 61/266

 

[tbone75]

Mr Bone, you don't have these 'issues' with those Dolmars, you know. :hmm3grin2orange:

LOL I know that! This POS is not mine LOL I was asked to fix it LOL

 

[Warped5]

LOL I know that! This POS is not mine LOL I was asked to fix it LOL

... then you must charge double .... :hmm3grin2orange:

 

[tbone75]

... then you must charge double .... :hmm3grin2orange:

If I ever find parts I may do that LOL

 

[Chris J.]

I'll try this again, just lost a long post. Some folks have asked for photos of some of the saws I have up for trade.

Wright 136 / Poulan 361.

http://s67.photobucket.com/albums/h286/antoniosalieri/Wright 136 Poulan 361/

 

[Chris J.]

My fourth try ....Homelite C-72.

Homelite C-72 chainsaw pictures by antoniosalieri - Photobucket

 

[Chris J.]

Poulan 3400.

Poulan 3400 chainsaw pictures by antoniosalieri - Photobucket


Dayton 3Z072

Dayton 3Z072 chainsaw pictures by antoniosalieri - Photobucket

 

[Jacob J.]

Got some 3/8x.063 semi chisel Stihl chain for trade. Will trade link for link of .050 or will trade for a bar or 2 in .063 to fit large husqvarna mount.
Bob

Hey Bob-

That Topic Micro old-school is actually real good stuff. I had a roll of that years ago and a tree service company paid me top dollar for because they loved it. I have some .063" gauge Husky bars I can trade. I think one is 32".

 

[Bowtie]

Ms310

Looking for a piston and/or rings for a Stihl MS310. I know I can get an aftermarket one on ebay, ust looking for better quality before going that route.